Living & Co Verona Bench User manual

R
R
Verona Bench
INSTRUCTION MANUAL
The Maximum Weight this product can hold up to 200 kgs
NZ 0800 422 274
AFTER SALES SUPPORT
Product size: 1270 x 340 x 470mm
9 400988 768045

NOTE: Your furniture has already been factory treated with an oil
preservative, however we do recommend after unpacking and
assembling your furniture, you thoroughly wipe clean your furniture
removing any dust particles, then lightly oil the furniture and let dry.
STEP 1. IMPORTANT. After oiling wipe off excess oil, then allow the oil
to dry in the shade away from direct sunlight until dry, then wipe off again
with a clean rag removing any excess oil that may not have penetrated
into the timber. Remove any excess oil if necessary.
STEP 2. REPEAT THE ABOVE PROCEDURE IN 48HRS. Sanding is not
required between these initial coats. Your furniture is now protected,
however repeat applications of the hardwood timber oil may be required.
Before re-oiling, check your furniture for any residue build up. If this
occurs, a light sanding may be required.
Note: The frequency of oiling will vary according to the climatic
conditions in your area and the exposure to the elements to which your
furniture is subjected.
NOTE: If Eucalyptus furniture is neglected, with prolonged
unprotected exposure to the elements, the timber will discolor to a
silvery grey, and checking and hairline cracks may appear. In the
event your setting does discolor, sanding and oiling will be required
to restore the timber. We recommend the furniture be stored
undercover during wintertime and wet seasons.
NOTE: WET TIMBER MUST BE DRIED FOR 3-5 DAYS BEFORE
OILING. DO NOT OIL THE FURNITURE LATE IN THE DAY WHEN
DEW OR CONDENSATION IS LIKELY TO FORM OR WHEN RAIN IS
THREATENING.
ALL TIMBER FURNITURE GOES THROUGH A SETTLING IN
PERIOD. FASTENERS MUST BE TIGHTENED REGULARLY. DO NOT
LEAVE FASTENERS UNTIGHTENED AS THIS COULD CAUSE
FURNITURE DAMAGE.
Important Care and Maintenance
R
NZ 0800 422 274
AFTER SALES SUPPORT

Eucalyptus timber is kiln dried under strict guidelines. After purchasing
your furniture, small hairline cracks may appear. This is a normal part of
the drying process of this particular timber species. These cracks will not
affect the durability of the furniture. 3% shrinkage may occur in this
species of timber.
WARNING: Staining on Tuscan or light-colored pavers may occur
from sap leeching and dust particles if the timber is not cleaned
properly and weathered correctly. Hose down your furniture, and
clean thoroughly before placing your furniture on light-colored
pavers.
We recommend storing furniture under cover, out of direct sunlight and
using furniture covers when not in use and for protection during the winter
months.
Do not overtighten screws or bolts.
Do not use this product if parts are missing, damaged or worn.
Never use a pressure hose or washer to clean the product.
Never use scourers, abrasives or chemical cleaners.
Assembly Details
20 minutes 2 X 2 metres
Approximate Assembly Time 1 Person of Assembly Required Assembly Space
Required Assembly Tools
Important Care and Maintenance
R
NZ 0800 422 274
AFTER SALES SUPPORT

1. Please check that all parts are present before you start the assembly
of your furniture.
2. For ease and speed of assembly, we recommend that before you
commence each step of the assembly, that you identify all the parts
required for that step.
3. For larger items, please ensure that you have sufficient space and
people (as indicated on page 3) to assemble your product safely.
4. We recommend that, where possible, all items are assembled near
to the area in which they will be placed in use, to avoid moving the
product unnecessarily once assembled.
5. For the protection of your furniture, we recommend that the product
is placed on a protected surface during assembly to prevent any
damage.
6. During assembly please take care not to over-tighten any fittings, as
this may damage the product. Do not use power tools.
7. Always place the product on a flat, steady and stable surface.
8. Do not stand on the product. Do not use the product as a stepladder.
9. This product is intended for domestic use only, as it is a non-industrial
product.
10. Please use caution and care when lifting the product to avoid
personal injury and/or product damage.
R
NZ 0800 422 274
AFTER SALES SUPPORT
Tips before you start

Part Name
1A
B
C
D
E
F
4
8
8
8
1
NO.
DESCRIPTION
QTY.
M8 x 50
Ø8.5 x Ø20 x 2
Ø8.5 x Ø14 x 2
R
NZ 0800 422 274
AFTER SALES SUPPORT

Assembly
C
C
D
E
E
Step 1
Step 2
A
B
BD
R
NZ 0800 422 274
AFTER SALES SUPPORT

R
Warranty
We pride ourselves on producing a range
of quality products that are both packed with features and
completely reliable. We are so confident in our products, we
back them up with a 1 year warranty.
Now you too can relax knowing that you are covered.
Customer Helpline NZ: 0800 422 274
This Product is covered by 1 year
warranty when accompanied by proof of purchase.
R
NZ 0800 422 274
AFTER SALES SUPPORT