
SAFETY INFORMATION
Before beginning to assemble the product, make sure all parts are present.
Compare parts with package contents list and hardware contents. If any
part is missing or damaged, do not attempt to assemble the product.
Contact customer service for replacement parts.
Please read and understand this entire manual before attempting to
assemble, operate or install the product.
Always disconnect the power supply prior to installing, servicing or
removing the LED mirror.
Installation work must be carried out by a qualified person in accordance
to all local and safety codes including the rules for fire rated construction.
Do not bend or kink the power wires.
Exercise care to not damage existing wiring when cutting or drilling into
walls or ceilings.
Avoid putting sharp or hard objects against mirror surface. Damage
and/or electrical injury may occur if punctured.
Turn product off during storms or power surge scenarios as power surges
may damage internal components.
If not being used for extended periods of time, ensure power is
disconnected.