Living Spaces 305-S362-730 User manual

Size of Mattress
This bed is designed to use a twin mattress 37.5" to 38.5" wide x 74" to 75" long with the total thickness
not exceeding 8" for upper bunk and lower bunk. Do not use mattress without the proper slat system and
proper attachments described in the instructions. NOTE: there must be at least 5 inches from the top
surface of the mattress to top edge of guardrail.
1. Follow the information on the warning appearing on the upper bunk end structure and on the
carton. Do not remove warning label from bed.
2. Always use the recommended size mattress or mattress support, or both, to help prevent the
likelihood of entrapment or falls.
3. Surface of mattress must be at least 5 inches below the upper edge of the guardrails.
4. Do not allow children under 6 years of age to use the upper bunk.
5. Prohibit more than one person on upper bunk.
6. Periodically check and ensure that the guardrail, ladder,and other components are in their proper
position, free from damage, and that all connectors are tight.
7. Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8. Alway use the ladder for entering and leaving the upper bunk.
9. Do not use any substitute parts. Contact manufacturer or dealer for replacement parts.
10. Use of a night light may provide added safety precaution for a child using the upper bunk.
11. If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed
should be placed against the wall to prevent entrapment between the bed and the wall.
12. Always use guardrails on both long sides of the upper bunk.
1. The use of water or sleep flotation mattress is prohibited.
14. Keep these instructions for future reference.
15. Strangulation Hazard-Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed: for example, but not limited to, hooks, belts, and jump ropes.
SAFETY WARNING !
Replacement Parts
Replacement parts, including additional guardrails, may be obtained from place of purchase or Original
distribution
Replacement Parts
Keep all instruction sheets for future reference to assemble bed for moving and/or different set up.
ASSEMBLY INSTRUCTIONS
Page 1 of 7
DESCRIPTION: 3/3 BUNK BED

MADE IN VIET NAM
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
PART LIST
2 PCS
Qty.
Descriptions
Drawing
Bed Side Rails
(305-S362-732)
SLATR-33 2 SET
Page 2 of 7
HARDWARE LIST (For 305-S362-730 3/3 Bunk Bed Ends)
Qty.
No. Descriptions Size
Drawing
1
2M4 1 PC
2 PCS
Allen Key
Bolt 1/4" x 15 x 9/16"
HARDWARE LIST (For 305-S362-731 Bunk Bed Ladder w/Guard Rail)
Qty.
No. Descriptions Size
Drawing
Bolt 1/4" x 45 x 1*3/4" 6 PCS
3
D-nut 1/4" x 15 x 9/16"
1 PC
2M4
2 PCS
42 PCS
5
Allen Key
Bolt 1/4" x 25 x 1"
1 PC
Metal Plate 120 x 25 x 3mm 6
10 PCSScrew M4 x 20mm
7
HARDWARE LIST (For 305-S362-732 Bunk Bed Rails)
Qty.
No. Descriptions Size
Drawing
Hanger Bolt 5/16" x 89 x 3 1/2" 16 PCS
8
16 PCS
9
16 PCS
10
Hexagon-nut
Lock washer
5/16"
Bunk Bed Ends (305-S362-730)
Long Guard Rail
(305-S362-731) 1 PC
Short Guard Rail
(305-S362-731) 1 PC
Wood Ladder
(305-S362-731) 1 PC
4 PCS
HARDWARE LIST (For SLATR-33)
Qty.
No. Descriptions Size
Drawing
13 52 PCS Screw M4 x 25mm
ASSEMBLY INSTRUCTIONS
DESCRIPTION: 3/3 BUNK BED
ITEM NO: 305-S362-730 / 731 / 732 / SLATR-33
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small Hardware which may have come
loose inside the carton during shipment.Identify and count all Hardware and compare with the Hardware List Below.
1 PC
Wrench
11
5/16"
5/16"
4 PCS
BunFoot (305-S362-730)
305-S362-732 Bunk Bed Rails
305-S362-730 3/3 Bunk Bed Ends
SLATR-33
305-S362-731 3/3 Bunk Bed Ladder W/Guard Rail
SLATR-33
305-S362-730 3/3 Bunk Bed Ends
305-S362-731 3/3 Bunk Bed Ladder W/Guard Rail
5/16" x 19mm
Flat washer 16 PCS
12

Page 3 of 7
ASSEMBLY INSTRUCTIONS
MADE IN VIET NAM
STEP 1
DESCRIPTION: 3/3 BUNK BED
ITEM NO: 305-S362-730 / 731 / 732 / SLATR-33
ASSEMBLY STEP BUNK BED ENDS

Page 4 of 7
ASSEMBLY INSTRUCTIONS
DESCRIPTION: 3/3 BUNK BED
ITEM NO: 305-S362-730 / 731 / 732 / SLATR-33
MADE IN VIET NAM
8
10 9
12
STEP 2
ASSEMBLY STEP BUNK BED ENDS & BED RAILS
11

Page 5 of 7
ASSEMBLY INSTRUCTIONS
MADE IN VIET NAM
13
STEP 3
DESCRIPTION: 3/3 BUNK BED
ITEM NO: 305-S362-730 / 731 / 732 / SLATR-33
ASSEMBLY STEP BED SLATR

Page 6 of 7
ASSEMBLY INSTRUCTIONS
MADE IN VIET NAM
STEP 5
STEP 4
3
2
7
7
6
STEP 6
DESCRIPTION: 3/3 BUNK BED
ITEM NO: 305-S362-730 / 731 / 732 / SLATR-33
ASSEMBLY STEPS BED W/GUARD RAIL

Page 7 of 7
ASSEMBLY INSTRUCTIONS
MADE IN VIET NAM
7
2
4
5
STEP 8
2
1
STEP 9
DESCRIPTION: 3/3 BUNK BED
ITEM NO: 305-S362-730 / 731 / 732 / SLATR-33
ASSEMBLY STEPS BED LADDER & INSERT HOLES
STEP 7