Living Spaces IA222-422 User manual

ITEMNO:IA222-422Queen Uph HB
IA222-402QueenRailsw/ Decking
IA222-423QueenLowProfileFB
Thankyouforpurchasingthisqualityproduct.Besuretocheckallpacking material carefullyfor
small partsthatmaycomelooseinsidethe cartonduringshipment.
UNIT SHOULDBE INSTALLEDBY2ORMORE PERSONS.
All Bedsneedtobeset upinthe exact final
locationsothatafterfull assemblyit will not
needtobemoved. Moving thebedwill cause
thesupportlegstomoveoutofperpendicular
(90degree),weakenthesupportsystem, and
may allowthebedtocollapse.
BEFORE USING THISPRODUCT PLEASEREAD, UNDERSTAND, AND FOLLOWTHESEINSTRUCTIONS.
Save these instructionsforfuture reference.
FORINDOORUSEONLY
TOOLSREQUIRED (NOTPROVIDED)
PHILLIPSSCREWDRIVER
IA222-423
IA222-422
COMPONENTSLIST: IA222-422
No.
1
2
3
4
Description Sketch Quantity
Headboard
LeftLeg
RightLeg
WoodStretcher 1PC
1PC
1PC
1PC
COMPONENTSLIST: IA222-423
No.
1
2
Description Sketch Quantity
Footboard
SupportLeg(forslats) 4Set
1PC
IA222-402
COMPONENTSLIST: IA222-402
No.
1
2
Description Sketch Quantity
Bed rails
Slats 4PCS
2PCS
3Decking 8PCS
HARDWARE LIST:IA222-422
1PC
No.
A
B
C
D
Description Sketch Quantity
Bolt 5/16" x1-1/2"
Lock Washer5/16"
FlatWasher5/16" x3/4"
Allen Wrench M4
10 PCS
HARDWARE LIST:IA222-402
8PCS
No.
F
G
Description Sketch Quantity
HangerBolt 5/16" x3"
HexNut5/16"
HexWrench 13mm
8PCS
1PC
Wood Screw #4x1-1/4"
8PCS
HalfMoon Washer 5/16"
10 PCS
H
I
E
10 PCS
8PCS
Wood Screw #4 x3/4" 16 PCS
J
Page1/6
ASSEMBLYINSTRUCTIONS
MADEINVIETNAM
06-17-2021

STEP2:Attachthewoodstretchertothelegsbyusing4bolts(A),lock washers(B) and flat
washers(C).
STEP1: Laytheheadboardfacedownonasoftsurface.Attachthe left leg and right leg to
headboardbyusing6bolts(A),lockwashers(B)andflatwashers(C).
LeftLeg
RightLeg
A
B
C
D
A
B
C
D
Slatbearerin
upperposition
Slatbearerin
lowerposition
STEP3: Theside railsmaybeused on eitherside.
Arrangethesiderailssotheslatbearers arein
UPPERPOSITIONpriortoattachmentasOPTION 1
andtheslatbearersareinLOWERPOSITIONprior
toattachmentasOPTION 2.
Page2/6
ITEMNO:IA222-422Queen Uph HB
IA222-402QueenRailsw/ Decking
IA222-423QueenLowProfileFB
ASSEMBLYINSTRUCTIONS
MADEINVIETNAM
06-17-2021

STEP5: Attachthesupportlegswithlevelertotheslats.
Adjustthelevelersonbottomofsupportlegswhen necessary.
SupportLeg
Leveler
ThisEndUp
Slat
SideRail
Headboard
Slatbearer
Side Rail
E
FGH
Makesuretheslatbeareris
inthe UPPER position.
I
STEP4: Screwthebolts(E)intoHB&FB.Makesuretheslatbearerisinthe UPPER position.
Alignthe boltswiththe holesintheendofsiderailsandattach theside railstoHB&FBusing
halfmoonWasher(F)andhexnuts(G).Thenuseahexwrench totightenall thenuts.
OPTION1: Thesiderailsmaybeusedoneitherside.Arrangetheside railssothe slat
bearersareinUPPERPOSITIONpriortoattachment inSTEP 4.
Page3/6
STEP6: Arrangeslatsontheslatbearersand then lay the
deckingontopofthe slats.Make surethe topandbottom
slatsaresituatedunderneaththepre-drilled holesasshownin
STEP7.Remove thedecking andattachslatstothe slat
bearerswithwoodscrews(I).
ITEMNO:IA222-422Queen Uph HB
IA222-402QueenRailsw/ Decking
IA222-423QueenLowProfileFB
ASSEMBLYINSTRUCTIONS
MADEINVIETNAM
NOTE: UseOption2ifusing an adjustablebasewithlegs.
06-17-2021

FUNCTIONALITYINSTRUCTION
SinglePowered USB
PortforCharging on
bothsides
STEP7: Putthedeckingovertheslats, securedeckingtothe slatswithwood
screws(J)throughthepre-drilledholesinthedecking asshownbelow.
Pre-drilledhole
Makesurethatthereisaslat
underthepre-drilled hole.
JDecking
Slat
IA222-423
IA222-402
IA222-422
Page4/6
ITEMNO:IA222-422Queen Uph HB
IA222-402QueenRailsw/ Decking
IA222-423QueenLowProfileFB
ASSEMBLYINSTRUCTIONS
MADEINVIETNAM
06-17-2021

SupportLeg
Leveler
ThisEndUp
Slat
SideRail
Headboard
Slatbearer
Side Rail
Makesuretheslatbeareris
inthe LOWER position.
Remove
SupportLeg(top)
I
STEP4: Screwthebolts(E)intoHB&FB.Makesuretheslatbearerisinthe LOWER position.
Alignthe boltswiththe holesintheendofsiderailsandattach theside railstoHB&FBusing half
moonWasher(F)andhexnuts(G).Thenuseahexwrench totightenall thenuts.
OPTION2: Thesiderailsmaybeusedoneitherside.Arrangetheside railssothe slat
bearersareinLOWERPOSITIONpriortoattachment inSTEP 4.
FGH
E
STEP5: Removethesupportlegs(top) asshown in thepicture
to theright.Attachthe support legswithlevelertothe slats.
Adjustthelevelersonbottomofsupportlegswhen necessary.
Page5/6
STEP6: Arrangeslatsontheslatbearersand then lay the
deckingontopofthe slats.Make surethe topandbottomslats
aresituatedunderneaththepre-drilledholesasshowninSTEP
7. Removethedeckingandattach slatstotheslatbearerswith
wood screws (I).
ITEMNO:IA222-422Queen Uph HB
IA222-402QueenRailsw/ Decking
IA222-423QueenLowProfileFB
06-17-2021
ASSEMBLYINSTRUCTIONS
MADEINVIETNAM
NOTE: SkipSteps5-7ifusinganadjustablebasewithlegs.

FUNCTIONALITYINSTRUCTION
IA222-423
IA222-402
IA222-422
SinglePowered USB
PortforCharging on
bothsides
STEP7: Putthedeckingovertheslats, securedeckingtothe slatswithwood
screws(J)throughthepre-drilledholesinthedecking asshownbelow.
Decking
Pre-drilledhole
Makesurethatthereisaslat
underthepre-drilled hole.
J
Slat
Page6/6
J
ITEMNO:IA222-422Queen Uph HB
IA222-402QueenRailsw/ Decking
IA222-423QueenLowProfileFB
ASSEMBLYINSTRUCTIONS
MADEINVIETNAM
06-17-2021