Living Spaces 305-P156502 User manual

7Seat Cushion 1pc
4Right Stretcher 1pc
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS HEAD SCREWDRIVER
3Left Stretcher 1pc
1Chair Back 1pc
2Front Stretcher 1pc
6Right Front Leg 1pc
G
E
10pcs
Flat Washer M6 x 19mm Ø
B
4pcs
JCBC Screw M6 x 60mm
A6pcs
CSK Screw M4 x 38mm
D
10pcs
Spring Washer M6 x 12mm Ø
C
4pcs
JCBC Screw M6 x 80mm
HARDWARE LIST
No. Description Sketch Quantity
F
1pc
Allen Key M4 x 65mm
2pcs
JCBC Screw M6 x 35mm
5Left Front Leg 1pc
Made In Malaysia
L I V I N G S P A C E S
ASSEMBLY INSTRUCTIONS
ITEM 305-P156502
Gathering Chair
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small
hardware which may have come loose inside the carton during shipment. Identify and count all hardware
and compare with the hardware list below.
When placing furniture on non-carpeted flooring, HMI recommends the use of floor protection such as
an area rug or furniture pads. Area rugs and padding not included with purchase.
No. Description Sketch Quantity
PARTS LIST
Page 1 of 2

56
6
( R )
5
( L )
2
7
FC
G
E
7
1
4
( R )
3
NOT PROVIDED
A
6x
STEP 2
Made In Malaysia
L I V I N G S P A C E S
Page 2 of 2
COMPLETE
STEP 1
( L )
2
( R )
STEP 4
( L )
( R )
7
1
STEP 3
4x
( L )
FD
G
E
4x
F
E
BG
2x
Do not fully tighten
at this moment.
Do not fully tighten
at this moment.
Turn the chair upright and place on level
surface.
Adjust the front legs so that chair is level
and does not wobble.
Tighten all the bolts and take care do not
over tighten.