Living Spaces La Jolla Queen User manual

CONGRATULATIONS ON YOUR NEW BED PURCHASE
~Warning：do not move bed after final assembly as it may result in damages to floor and/or bed.~
Hardware included in headboard carton to attach bed feet and center support system.
1 2
Step#1
Retrieve bed feet from carton fastened behind the headboard.
Attach bed feet (F) to the headboard using Wrench (I), Bolt (K) and Washer (E).
Attach bed feet (F) to the footboard using Wrench (I), Bolt (K) and Washer (E) .
Step#2
Attach side rails to headboard using Wrench (I), Bolt (B) and Washer (E)(factory installed).
Attach side rails to footboard using Wrench (I), Bolt (B) and Washer (E)(factory installed).
A
D
F
I
K
G
J
T
Φ6*20MM
Φ6 MM
H=11CM
Φ8*80 MM
Metal
Slats
Center support
legs H=17CM
Φ6*25MM
8PCS
12PCS
4PCS
1PC
4PCS
4PCS
4PCS
4PCS
La Jolla Queen Assembly Instructions
*Bolt B and Washer E
are factory installed*

CONGRATULATIONS ON YOUR NEW BED PURCHASE
~Warning：do not move bed after final assembly as it may result in damages to floor and/or bed.~
Hardware included in headboard carton to attach bed feet and center support system.
3 5
Step#3
Attach steel center support legs (J) to the Metal slat (G) using Wrench (I), Bolt (T) and
Washer (D).
Step#4
Move/place bed into final position in bedroom.
Step#5
Attach steel slat support system to full length steel side support cleats(flat side facing up).
Verify the metal slats are installed properly into support cleats and center support legs are
perpendicular to the floor for full support.
A
D
F
I
K
G
J
T
Φ6*20MM
Φ6 MM
H=11CM
Φ8*80 MM
Metal
Slats
Center support
legs H=17CM
Φ6*25MM
8PCS
12PCS
4PCS
1PC
4PCS
4PCS
4PCS
4PCS
La Jolla Queen Assembly Instructions