Living Spaces 7030-01270 KIT User manual

Sedona Collection: Twin Contempo Bed
PARTS LIST
BOX 1: 4400 Contempo Twin Ends
Part # Description Quantity
S0076END Contempo Twin Headboard
1
BOX 2: 4717 Contempo Twin Frame
Part # Description Quantity
S1001SRL 5/4x6 Mattress Rail 2
149383/40 Twin Individual Slat 3
5040-43181 Hex Lag Bolt/Washer 8
5040-35410 #6 x 1 1/4 Phil Flat Slat Screw 10
Picture
Picture
7030-01270 KIT
For: 4717 Frame Rails/4400 Bed Ends
S0077END Contempo Full Footboard 1
COMPLETED ASSEMBLY

1) Attach two mattress rails(S1001SRL) to headboard assembly(S0076END) and footboard
assembly(S0077END) with 8 lag bolts and 8 washers(5040-43181), and tighten.
2) Place slat kit (sold separately) and individual slats(140383/40) in accordance with the diagram
on the last page of this instruction sheet. Attach the 5 designated slats to the mattress rail cleats
using the #6x1 ¼” slat screws(5040-35410).
5040-43181
S1001SRL
S0076END
S0077END

Installation of individual slats for use with Slat Roll (Slat roll sold separately) See your retailer for purchase of Slat Roll
SCREW
SCREW
SCREW
SCREW SCREW SCREW SCREW
SCREW
SCREW
SCREW
INDIVIDUAL SLATS INDIVIDUAL SLATS INDIVIDUAL SLATS
Installation of individual slats for use with Bunkie Board (Bunkie Board sold separately) See your retailer for purchase of Bunkie Board
SCREWSSCREWSSCREWSSCREWSSCREWSSCREWS
INDIVIDUAL SLATS INDIVIDUAL SLATS INDIVIDUAL SLATS
When used with a slat roll, the three
individual slats should be placed evenly in the gaps and underneath the strapping before fastening.
Individual Slat
Individual Slat
Individual Slat
Diagram 1 Diagram 2
Scan Code for Instructional video