Living Spaces Summit 4697 User manual

MAS90: 5043-43384
SUMMIT TRUNDLE BED HARDWARE
QTY: DESCRIPTION:
12 100MM DECORATIVE HEAD LAG BOLTS
4 CASTERS WITH INSERT
1 4MM ALLEN WRENCH
1 4MM POWER DRILL DRIVER
7030-00135 KIT
2 - Cup Pull Handles 4 - 1 1/2" Combo Truss
ASSEMBLY: 1 PERSON AND 45 MINUTES
TOOLS:
1) 4mm Allen Wrench (INCLUDED)
2) 4mm Allen Drill Bit
(Be sure to FULLY SEAT bit into bolt head before turning)
3) Phillips Head Screwdriver
*We recommend using a power driver with the drill bit if available*
BE SURE THAT LAG BOLTS ARE STARTED INTO THE HOLES ON THE FRAME RAILS
DURING ASSEMBLY. DO NOT FULLY TIGHTEN UNTIL ASSEMBLY IS LOOSELY COMPLETE

D
  
4697 SUMMIT TRUNDLE BED

7030-00335
 
 
 
 
 
 
G) 

 

  00  
 00 

  
 
  
  . Install cup pull handles with 4 Combo Truss screws.
5)  