Living Spaces MAS90 User manual

MAS90: 5043-43381
TRUNDLE BED HARDWARE
QTY: DESCRIPTION:
12 1/4" X 4" LAG BOLTS BLACK
12 3/16" WASHER BLACK
4 CASTERS WITH INSERT
7030-00205 KIT
4 - Antique Brass Knobs 4 - 1 1/2" Screws

TRUNDLE BED
4466
PARTS LIST:
A) 1 -Trundle Fascia
C)
D)
F)
TOOLS REQUIRED:
B) 1 -Back Rail
3 -Bottom Slats
12-4” Lag Bolts (4" Decorative for LAGUNA)
E) 12-Washers
4 -Casters with inserts
1) 7/16" Wrench or Socket Wrench
2) Phillips Head Screwdriver
NOTE: Tool recommended: Electric driver with 7/16” socket
ASSEMBLY INSTRUCTIONS:
NOTE:
Make sure you have all parts before beginning assembly. If you need a part, contact the dealer where you
purchased your bed.
1.) Attach the front trundle fascia (A) to the bottom slats (C) using the 6 each 4” lag bolts and washers.
Then attach the back rail (B) to the fascia and slats assembly using the remaining 6 each 4” lag bolts
and washers.
2.) Attach inserts for the casters into the predrilled holes in the bottom slats. Insert the casters in these
caster inserts. Middle bottom slat does not get casters. Assembly will be complete.
7030-00335