Living Spaces Dean Storage Queen Bed User manual

CONGRATULATIONS ON YOUR NEW BED PURCHASE
~Warning：do not move bed after final assembly as it may result in damages to floor and/or bed.~
Hardware included in headboard carton to attach bed feet and side rails.
1 2
Step#1
Attach side rails to headboard using Wrench (I), Bolt (B) and Washer (E)(factory installed).
Step#2
Retrieve bed feet from carton fastened behind the headboard.
Attach bed feet (F) to the headboard bracket using Nut (Z) , Spring Washer (A1) and Washer
(E),Tighten with Wrench (Y)
Attach bed feet (F) to the side rails.
A1
D
E
F
I
M
J
L
R
Y
Z
Φ8 MM
Φ6 MM
Φ8 MM
H=8 CM Φ8 MM
Φ8 MM
Φ6*40MM
H=26 CM
Φ8*50MM
Φ6*25MM
2PCS
7PCS
4PCS
4PCS
1PC
3PCS
3PCS
2PCS
4PCS
1PC
4PCS
Dean Storage Queen Bed Assembly Instructions
*Bolt B and Washer E
are factory installed*

CONGRATULATIONS ON YOUR NEW BED PURCHASE
~Warning：do not move bed after final assembly as it may result in damages to floor and/or bed.~
Hardware included in side rails carton to attach center support system..
3 4
Step#3
Attach Metal support beam (U) to side rails using Wrench (I), Bolt (K) and Washer (E)
(factory installed).
Step#4
Attach center support rail (O) to the headboard using Wrench (I), Bolt (B) and Washer (E)
(factory installed).
Attach center support rail (O) to the Metal support beam (U) using Wrench (I), Bolt
(L) ,Washer (E) and Nut (Z). Tighten/secure center support rail with Wrench (Y) .
O
P
U
1PC
13PCS
1PC
Dean Storage Queen Bed Assembly Instructions
*Bolt K and Washer E
are factory installed*
*Bolt B and Washer E
are factory installed*

CONGRATULATIONS ON YOUR NEW BED PURCHASE
~Warning：do not move bed after final assembly as it may result in damages to floor and/or bed.~
Hardware included in headboard carton to attach bed feet and side rails.
6 7
Step#5
Locate bed in final position before attaching center supports.
Step#6
Attach center support legs (J) to the Center support rail (O) using Wrench (I), Bolt (M) and
Washer (D).
Attach center support leg (J) to the Metal support beam (U) using Wrench (I), Bolt (M) and
Washer (D).
Step#7
Lay the flat wooden slats on the support rails,fix the slats using Wrench (I), Bolt (R) and
Washer (D).
A1
D
E
F
I
M
J
L
R
Y
Z
Φ8 MM
Φ6 MM
Φ8 MM
H=8 CM Φ8 MM
Φ8 MM
Φ6*40MM
H=26 CM
Φ8*50MM
Φ6*25MM
2PCS
7PCS
4PC
4PCS
1PC
3PCS
3PCS
2PCS
4PCS
1PC
4PCS
Dean Storage Queen Bed Assembly Instructions

CONGRATULATIONS ON YOUR NEW BED PURCHASE
~Warning：do not move bed after final assembly as it may result in damages to floor and/or bed.~
Hardware included in storage drawer carton.
8 9
Step#8
Attach casters (C) to the drawer using Wrench (I), Bolt (A) and Washer (D).
Step#9
Attach drawers to the drawer face using Wrench (I), Bolt (B) and Washer (E)
A
B
C
D
E
I
Φ6*15MM
Φ8*30 MM
H=8 CM
Φ6 MM
Φ8 MM
32PCS
16PCS
16PCS
32PCS
16PCS
1PC
Dean Storage Queen Bed Assembly Instructions

CONGRATULATIONS ON YOUR NEW BED PURCHASE
~Warning：do not move bed after final assembly as it may result in damages to floor and/or bed.~
10
Step#10
Attach drawers to the footboard using Wrench (I), Bolt (B) and Washer (E).
11
Step#11
Insert/Roll the drawer under the bed.
Factory installed guide rail keeps drawer centered.
Dean Storage Queen Bed Assembly Instructions
*Factory installed
guide rail keeps
drawer centered*