Living Spaces Rivera 288992 User manual

Date:
288992
ASSEMBLY INSTRUCTIONS
05-19-20
Page 1 / 7
Rivera Dining Table

·
·
·
·
·
·
·
·
·
·
Date:
IMPORTANT SAFETY INSTRUCTIONS:
Keep small parts and hardware out of the reach of children.
Use only vendor supplied hardware to assemble. Using unauthorized hardware could jeopardize the structural
intergrity of the item.
Read all instructions carefully before unpacking assembly parts. Sharp, exposed staple tips can cause injury. For
your protection, please remove any exposed staples used in packing.
05-19-20
Keep instructions for future use.
For your safety, assembly by two or more adults is recommended.
Page 2 / 7
PRE-ASSEMBLY INSTRUCTIONS:
To avoid accidentally discarding small parts or hardware, please do not dispose of any contents until assembly is
complete.
Do not over-tighten screws or bolts.
Intended for residential use only.
Page 3
Page 7
Page 6
Page 5
Page 4
TABLE OF CONTENTS
Parts List
Hardware List
Assembly Instructions
Care & Maintenance
Warnings
Remove all parts and hardware from the box and place them on a carpeted or scratch-free work surface.
Prior to starting assembly, use the parts and hardware lists to identify and separate each of the pieces included.

PART # QTY
A1
B1
C1
Date:
Leg
Leg
Top
PARTS LIST
PICTURE
PART DISCRIPTION
05-19-20
Page 3 / 7
Thank you for your purchase. Be sure to check all packing material carefully for small parts which may have come
loose inside the carton during shipment. Identify and count all parts and compare with the parts and hardware
lists.

PART # QTY
19
29
31
Date:
M6 Washer
Allen Key
HARDWARE LIST
PICTURE
PART DISCRIPTION
M6
05-19-20
Page 4 / 7
Thank you for your purchase. Be sure to check all packing material carefully for small parts which may have come
loose inside the carton during shipment. Identify and count all parts and compare with the parts and hardware
lists.
Phillips screwdriver also needed for assembly (not included).

Date:
STEP 1
Attach Legs
1. Attach Legs (A) to the bottom of the table top and tighten with Allen Wrench (3).
2. Attach Legs (B) to the bottom of the table top and tighten with Allen Wrench (3).
05-19-20
Page 5 / 7

Aluminum Care Tips
·
·
·
·
·
Date:
CARE & MAINTENANCE
Clean any dirt or splashes with mild soap, water, and a microfiber cloth or sponge.
Rinse thoroughly and dry with a towel.
Thoroughly dry any surface water with a drying cloth to avoid water spots.
Do not use any abrasive materials, cleansers, or bleach products as these may damage the powder coat.
Do not use steel wool or Scotchbrite on powder coated surfaces.
05-19-20
Page 6 / 7

·
·
·
·
·
·
Date:
Dispose of packing material properly. Do not use plastic cover as head covering as it may cause suffocation.
05-19-20
Page 7 / 7
Use this product for intended purpose only.
Intended for residential use only.
WARNING
Do not use this product unless all screws and bolts are securely tightened.
Check that all screws and bolts are secure every three months or as needed
Do not use this product as a stepladder.