Living Spaces Denny Smoke 207212 User manual

ASSEMBLY INSTRUCTIONS
Parts List
Front Leg
(Long)
2 Pieces Rear Leg
(Short)
2 Pieces
Plastic washer
4 pieces
CAUTION
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE STARTING ASSEMBLY
PROCESS
IT IS RECOMMENDED TWO PEOPLE WORK TOGETHER WHILE ASSEMBLING THIS
FURNITURE
ASSEMBLY
STEP#1
THE WOODEN FEET ARE LOCATED AT THE REAR OFSEAT CUSHION, REMOVE ALL
THE WOODEN FEET FROM THE BOX AND APPLY THE PLASTIC WASHER ON TOP
THAT IS PROVIDED.
Turn the page over to see the remaining instructions

STEP#2
ATTACH EACH WOODEN FOOT TO CORRESPONDING PRE-DRILLED HOLES BY
HANDTURNING IN CLOCKWISE DIRECTION AS FIGURE UNDERNEATH.
NOTE: PLEASE DO NOT OVER TIGHTEN THE FOOT
STEP#3
SLIDE THE METAL RECEIVERS OVER THE MEATL POSTS (FIGHRE A). PAY CLOSE
ATTENTION TO THE ALIGNMENT OF THE RECEIVERS AND POSTS IN ORDER TO
ENSURE A PROPER CONNECTION.
STEP#4
PRESS BOTH SIDES OF FIRMLY INTO PLACE. THE BACK SHOULD AUTOMATICALLY
LOCK INTO PLACE.
Long Leg
Short Leg