Living Spaces 17C212A-W-LS-3D User manual

A
B
1
4
C
D
E
12
12
1
WASHER
SEAT BOLT
LEG ALLEN WRENCH
REF PART NAME PART IMAGE QTY REF PART NAME PART IMAGE QTY
Diagram:
(M6*35L)
A
B
C
D
E
HAYES OUTDOOR BANQUETTE LAFSOFA
17C212A-W-LS-3D
Assembly Instruction
Assembly Steps:
Step 1: Remove protective wrapping and lay all parts on floor. Make sure all parts
packed in Carton against attached parts list to make sure all parts are presented.
Step 2: Place a protective soft Material on floor.Lay seat (A) upside down on floor,
the bottom is facing up.
Step 3: Attach Leg (B) to the bottom as shown in Diagram, using Bolt (D )
and Washer (C).
Step 4: After all bolts are aligned properly before tightening. With a second person's
Assistance carefully turn the Sofa over onto its legs. Make sure legs rest on a flat
surface.
NOTE: IT IS USER'S RESPONSIBILITY TO MAKE SURE ALL PARTS ARE
ASSEMBLED AND TIGHTENED PROPERLY AND SECURELY.
Parts List:

Assembly Steps:
Step 1: Remove protective wrapping and lay all parts on floor. Indentify all parts packed in Carton
against attached parts list to make sure all parts are presented.
Step 2:Place a protective soft Material on floor.Lay seat (A)and armrest（G）upside downon
floor, the bottom is facing up.
Step 3: Put seat(A) and armrest(G) together.as shown 1 in Diagram, using Bolt (F ) and Washer
(C).
Step 4:Attach Leg (B) to the bottom as shown 2 in Diagram, using Bolt (D )and Washer (C).
Step 5: After all bolts are aligned properly before tightening. With a second person's Assistance
carefully turn the Sofa over onto its legs. Make sure legs rest on a flat surface.
NOTE: IT IS USER'S RESPONSIBILITY TO MAKE SURE ALL PARTS ARE ASSEMBLED AND
TIGHTENED PROPERLY AND SECURELY.
HAYES OUTDOOR BANQUETTE RAFSOFA
17C212A-W-RS-3D-KD
Assembly Instruction
A
B
1
1
2
C
D
E
F
G
6
10
1
1
4
WASHER
SEAT
BOLT
LEG
ALLEN WRENCH
REF PART NAME PART IMAGE QTY REF PART NAME PART IMAGE QTY
Diagram:
(M6*35L)
BOLT
ARMREST
(M6*45L)
A
2
B
C
D
E
G
C
C
C
F
F
F
C
F
Parts List: