Livingston Systems TucLoc 8-UP Platen User manual

Page 1of 4
10750 Irma Dr. Suite 11
Northglenn, CO 80233
1-800-624-4381
Livingstonsystems.com
[e-mail]
QUICK GUIDE FOR THE TUCLOC® 8-UP PLATEN
(EPSON F2000 SPECIFIC)
The Livingston Systems TucLoc® 8-UP Platen for Epson’s SureColor F2000 printer is covered under Patent No.
7854200. This platen uses the 16X20 template in Garment Creator. There is no specific template for the platen
but that does not limit what can be printed.
The platen is symmetrical and can be loaded with labels/logo forward or backward.

Page 2of 4
PRINTING OPTIONS:
The 8-UP Platen can be used for printing on short sleeves, neck tags, or locker tags. The garments are loaded,
and excess material is tucked between the TucLoc® rubber underneath. With the base removed, this platen
may be used to print some Koozies.

Page 3of 4
GARMENT CREATOR:
The 8-UP Platen has eight printing surfaces, each 4” x 4” with a 1.49”gap. The image below shows example
locations and orientations of the printable area within the 16x20 template. The right side would be correctly
oriented for short sleeves while the left side would be oriented for Koozies, neck, and locker tags.

Page 4of 4
The 8-UP platen has the same outer dimensions as the Epson® 16x20 platen. It is not however exactly 16x20
inches but 16.47”x 20.49”. The ½” grid pattern on Garment Creator® can therefore throw you off if you are
placing images exactly in the 4x4 grid. It is highly recommended to do test prints on rags, paper, or right on the
platen prior to loading actual garments.
VISIT US ONLINE
SourceOne.Nazdar.com
CALL US
888-578-5713
© 2019 Nazdar. All Rights Reserved.
Specifications subject to change without notice.
THIS PRODUCT IS BROUGHT TO YOU BY