Livoo TEC614 User manual

User manual
WWW.LIVOO.FR
Reference : TEC614
Version : 1.4
Language : English
luetooth® compatible
headset with micro
phone

User manual
1
Thank you for buying our LIVOO product. We take great care in design, ergonomics and ease of use of our
products. We hope that this product will give you complete satisfaction.
This manual is also available on www.livoo.fr
GENERAL INSTRUCTIONS
PLEASE TAKE TIME TO READ WELL THE INSTRUCTIONS FOR USE PARTICULARLY EFORE THE FIRST USE.
A misuse of the appliance can damage it or hurt the user. Assure that you use the appliance for the use for
which it is designed; we refuse any responsibilities as for the damages by an incorrect use or a bad
manipulation.
•efore using the appliance for the first time, please read carefully these instructions and save it for
any further need.
•Keep this product away from water, liquids or humid areas.
•Keep this product away from naked flames such as candles.
•The unit comes with a rechargeable battery so please do not throw it into fire to avoid explosion.
•The product should only be supplied by the power source indicated on the label.
•Do not place the product in direct sunlight or heat. Keep away from temperatures over 40℃.
•Do not press the buttons too hard as it could damage the product.
•Do not use a wet cloth on the product. In order to clean it, always use a dry cloth. Keep it free from
dust.
•Do not use chemicals on this product.
•Never attempt to repair this product yourself. Any operation that requires opening the product
should be left to a qualified technician.
•When the product is not in use, make sure it is shut off and stored in a cool and dry place.
•Do not insert any foreign object into the product.
•Adult Supervision is recommended with children using this product.
•Avoid dropping or standing on the product, as harsh impacts could damage the product.
•Make sure children and infants do not play with plastic bags or any packaging materials.
•Please follow the instruction to operate.

User manual
2
SPECIFICATIONS
luetooth® Version luetooth® V5.0
luetooth® Chipset CSR 8615
Operation Range 10m
luetooth® Protocols HSP HFP A2DP AVRCP
CODEC Code S C
attery Capacity 180mAh/3.7V
Charging Time 2h
Stand-by Time 200h
Working Time About 17h (50% volume)
Headset Net Weight 51g
Charge ase Net Weight 242g
Headset Dimension 163.21*142.27*48.5mm
Charge ase Dimension 79*73*31mm
PRODUCT DIAGRAM
Volume
–
LED Indicator
Micro US
MIC
MF (Multi
Function utton)
Charge base Interface

User manual
3
PACKAGE CONTENT
A. luetooth® Headset TEC614 x 1
. Charge ase x 1
C. Micro US charging cable x 1
D. User manual x 1
ASIC OPERATION
BUTTON FUNCTION OPERATION
MF
Power On In off status，Long press 1-3 seconds MF to power on.
Power Off In on status，Long press 5 seconds to power off.
Enter into
pairing mode
In off status，Long press 5-8 seconds to enter into pairing
mode. Or under unconnected standby mode, double press the
MF to enter into pairing mode.
Play/Pause Short press when play music.
Redial a call Double press MF to dial the last call.
Reconnect When there is a pairing record, power on and enter into
reconnect state or short press MF to reconnect under pairing
mode.
Voice dialing Long press 1 second MF then release.
Auto switch Long press 1 second MF to switch the audio between phone
and luetooth® headset.
Answer a call Short press (when call coming).
Hang up a call Short press (during a call).
Reject a call Long press 1 second (when call coming).
Volume + Volume up Short press.
Next song Long press for 1 second.
Volume - Volume down Short press.
Previous song Long press for 1 second.

User manual
4
LUETOOTH® ® PAIRING AND CONNECTION
A. In off status, long press 5-8 seconds to enter into pairing mode with LED lue & Red flash alternately.
. Search and click to connect “TEC614” on your phone luetooth® lists, LED change to LED lue flash after
connected, now you can play music from phone to headphone.
C. You can press MF / volume+ / volume- on the luetooth® headset to control the answer/hang up a call
and play/pause of the music, next and previous songs, volume up and down.
CONNECTION WITH TWO DEVICES
A. Follow previous part to connect with first phone, then turn off the luetooth® function of first phone.
. Double press MF to pairing mode again with Red & lue LED flash alternately.
Pairing: In off status, long press MF 5-8 seconds to
enter into pairing mode with LED lue & Red
alternately flash.
Connection: Search and click to connect “ TEC614” on
your phone
luetooth®
list.

User manual
5
C. Search and click to connect “TEC614” on your second phone luetooth® (or PC) lists, LED change to lue
LED low flash after connected.
D. Turn on luetooth® function of first phone, click to reconnect “TEC614”on luetooth® lists. Headset
connected with two phones now.
Notes：
Music only can be played from one phone under two connections, when you want to play music from
another phone, you need to pause or close the music of the previous phone. The same operation during
talking status.
LED INDICATOR
Mode LED Indicator
Power on LED lue flashes 1 second
Power off LED Red flashes 1 second
Pairing mode LED Red & lue flashes alternately
Unconnected standby mode LED lue flashes once every 2 seconds
Connected standby mode LED lue flashes once every 5 seconds
Playing music LED lue flashes once every 5 seconds
Talking LED lue flashes once every 5 seconds
Delete paired record lue and Red LED flashes once at the same time
Charging Solid LED Red
Full charged Solid LED lue
Low battery Red LED flash

User manual
6
CHARGING
Please charge the TEC614 at once when the Red LED flash.
Charging time about 2 hours. Solid LED Red change to Solid LED lue when full charged.
Charge Connections
Please connect the TEC614 to charging port through the Micro US charging cable, any charger can be
used as car charger, travel charger, computer US , etc.
Use of charge Base
Please place the TEC614 on the charging base, then connect the charging base to US charger through the
Micro US port for charging.
Note：
Please charge the TEC614at least one time every 2 months when don’t use it.
Charging with Charger
Charging with PC
Charging with Charger
Charging with PC

User manual
7
ATTENTIONS AND Q AND A
A. Ho to reconnect and operation hen failed to reconnect?
When TEC614 connected with your mobile phone successfully at the first time, it will search and reconnect
the paired device automatically when power on, if failed, please pair and connect again.
B. Ho to Delete paired records?
In Power on state, long press the volume+ and the volume- button for 5 seconds to clear the pairing
record. The indicator lue and Red LED flashes once at the same time that means the pairing record has
been cleared, and the TEC614will not connect back to the connected device. When there are various
connection problem, try clearing the pairing record firstly.
C. What’s the pass ord for pairing?
Some connection devices require password for pairing, please try 0000 or 8888 or 1111 or 1234.
D. What devices could charge for the headphone?
Any car charger, power bank, PC etc. which meet DC 5V, charging current more than 500mA could be used
to charge this item.
E. Three- ay calling function operation.
Call coming during call: short press the MF to answer the new call and hang up the current call;
Call coming during the call: double press the MF to answer the new call and keep the current call;
Call with a new call coming: long press the MF for 1 second rejecting a new call.
When you are on a three-party call, double press the MF to switch audio between the current call and the
keep call.
EU DECLARATION OF CONFORMITY
We
DELTA
P61071
67452 Mundolsheim – France
Herewith declare under our sole responsibility, that the radio equipment
luetooth® compatible headphone
TEC614 (Frequency range 2402MHz-2480MHz)
Fulfils the essential requirements of the Directive 2014/53/UE
The following standards were applied:
Radio:

User manual
8
EN 300 328 V2.2.2: 2019-07
EMC:
EN 301 489-1 V2.2.2.3: 2019-11
EN 301 489-17 V3.1.1: 2017-02
Health and Safety:
EN 62638-1 2014+A11 2017
EN 62479: 2010
EN 50663:2017
Mundolsheim, 03/12/2020
Correct disposal of the unit
(Electrical and Electronic Equipment)
(Applicable in the European Union and the rest of Europe that have adopted separate collection systems countries)
The European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical
appliances must not be disposed of in the normal household waste stream. Old appliances must be collected separately in order
to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the
environment. The symbol of the crossed out dustbin is marked on all products to remind the obligations of separate collection.
Consumers should contact their local authority or retailer for information concerning the correct disposal of their product.
•Non contractual illustration
LIVOO
BP 61071
67452 Mundolsheim

User manual
9
•Product information is subject to change without prior notice.