User Manual
6
-Press the start button again. The measurement will be complete within 1 secon . An acoustic
warning will warn you of the en of operation.
-Move the thermometer away an check the isplay which will show you the measure
temperature before automatically turning off after 8 secon s.
Measurement of object temperature
In this mo e, the temperature if an object will be isplaye , to check if it is correct (for example, milk
pow er for newborns).
-To select the object temperature measurement mo e, when the evice is turne on, make sure
that the horizontal button is set to OBJET .
-Keep the thermometer with the lens/sensor pointe towar s the object with a istance from
1cm to 5cm. Do not place the lens irectly on the surface.
-At the acoustic signal, check the temperature show on the isplay which will automatically turn
off after 8 secon s.
-Object temperature measurement mo e is not suitable for bo y measurement.
Display lighting
In a ition to the acoustic signal, the thermometer is equippe with a visual signal. By coloring the
isplay, in fact, it will possible to un erstan if the temperature is Normal (Green), Me ium (Orange)
or Hight (Re ). His setting can also be turne off.
-Press the “SET” button to access the F1 menu.
-Press the “SET” button 2 more times to access the F3 menu.
-Press “+” or “-” to activate or eactivate the lighting.
Using the memory function
This function automatically saves the last 32 measurements ma e. Press the “+” or “-”
button to view them.
Alarm Value-menu
To set up the alarm value-menu F2. To press set for 2 secon s, LCD shows F1, press set again, show
F2, press the button “+” an “-”, to set up the alarm value, press set for keep setting.
