LMI 241 Series User manual

101 N. Alloy Dr.
Fenton, MI 48430
Ph [phone]
Fax [phone]
[e-mail]
Research, Development and Manufacturing of Precision Measuring Systems
Form: CA 203 11/16/2017 R:\Quality\Calibration Instructions\LMI 241W Quick Start Guide Page 1 of 2
Quick Start Guide to LMI 241 Association/Calibration with DM600
Associating 241W
 Press On/Menu on the DM600
 Press to highlight Gage
 Press
 Select LMI Gauge Default Suite
 Press
 Use the arrows to select L241F
 Press three times to open the Master Tab
 Follow the directions on the screen
enter
enter

101 N. Alloy Dr.
Fenton, MI 48430
Ph [phone]
Fax [phone]
[e-mail]
Research, Development and Manufacturing of Precision Measuring Systems
Form: CA 203 11/16/2017 R:\Quality\Calibration Instructions\LMI 241W Quick Start Guide Page 2 of 2
Calibrating 241W
To Master an LMI Gauge, you will follow a basic 3 Point Mastering process for the 241 gauge:
 LO Position
 HI Position
 Master Position
Calibrate the LO Position: Place the Gauge in LO position and press
Calibrate the HI Position: Place the Gauge in the HI position and press
Calibrate the Master Position: Place the Gauge in the Master position of the block and press
enter
enter
enter