Locstar 8105-FMT User manual

LOCSTAR 8105 FMT MANUAL
LOCSTAR 8105-FMT MANUAL
Swipe the screen to wake up the lock
The default factory Master Passcode is 123456
CHANGE MASTER CODE
Press #, then enter default password (123456), press # then press 11 # enter the new
master passcode, then press # and enter the new master passcode again to confirm, then
press #
The master passcode is now changed.
For example: # (123456) # 11 # (456789) # (456789) #.
Your new master passcode is now 456789
# old default
password #
11 #
new master
password #
Confirm new
master password #

LOCSTAR 8105 FMT MANUAL
ADDING USER
To add password as user:
Press # enter master code (456789) #, then press 01 #, enter the code to register in (001) #,
press the user password to unlock the lock, then press # 3 times
*THE REGISTER CODE SHOULD BE IN SERIES 001, 002, 003, 004, etc.*
For example: # (456789) # 01 # 001 # 1234 # # #
Your user code is now 1234 to unlock the lock
You can keep on adding new user using new register code
To add card as user:
The method Is same;
Press # enter master code (456789) #, press 01 # enter the register code (002) #, hold the
card on the card reader then press # 2 times or until has 3 beeps
You can now scan the card to unlock the lock
# master code
#
01 #
Register
code #
New
password
# # #
# master code
#
01 #
Register
code #
Hold card on
scanner
# #

LOCSTAR 8105 FMT MANUAL
ADDING ONE TIME PASSWORD
Press # enter the master code (456789) #, enter 33 # enter the one-time password and
press #
For Example: # 456789 # 33 # 0000 #
The one-time password is 0000
*THIS PASSWORD WILL ONLY OPEN THE LOCK ONE TIME*
DELETING USER
To delete the user, first press # enter the master code (456789) #, press 44 #, enter the code
registered you want to delete the user of (002), press the # 1 time
I registered the card under 002, and now is deleted and cannot unlock the lock. The card
must be added as user again to be able to open the lock
DELETING ALL THE USER
Press # enter the master code (456789) #, press 22 #, enter the mater code (456789) #, re-
enter the master code (456789) and press # 2 times or until has 3 beeps
For Example: # 456789 # 22 # 456789 # 456789 # #
*ALL THE REGISTERED USER, CARD AND ONE-TIME PASSWORD WILL BE
DELETED*
# master code
#
33 #
One-time
password
#
# master code
#
44 #
Register
code
#
# master code
#
22 #
456789 #
456789
# #

LOCSTAR 8105 FMT MANUAL
RESETTING THE LOCK
Press and hold the clear key (Located on the backside of the lock) for few seconds until you
hear 3 beeps. This will take few seconds.
The lock is now reset, and the master code is back to the default factory code (123456)
SUMMARY
CODE
USE
11
CHANGE MASTER CODE
01
ADD USER
22
DELETE ALL USER
33
ADD ONE TIME PASSWORD
44
DELETE USER
001, 002,..
REGISTER CODE
CLEAR KEY
3 beeps- SUCCESSFUL