Logik L17SKC14 User manual

Instruction Manual
L17SKBK14
L17SKC14
L17SKGR14
L17SKR14
Thank you for purchasing your new Logik Kettle.
We recommend that you spend some time reading this instruction manual
in order to fully understand all the operational features it oers.
Read all the safety instructions carefully before use and keep this
instruction manual for future reference.
Kettle
SAFETY WARNINGS!
For your continued safety and to reduce the risk of injury or
electric shock, please follow all the safety precautions listed
below.
• Read all the instructions carefully before using this appliance
and keep them for future reference.
• Retain the manual. If you pass the appliance on to a third
party, make sure to include this manual.
• Unplug the appliance from the mains socket when not in
use, or before cleaning any part of the appliance.
• Allow the appliance to completely cool down before
cleaning.
• Never immerse the appliance in water and always keep the
electrical contacts dry.
• Never place the appliance on or near sources of heat such as
a cooker ring or gas ame.
• Always place the appliance on a dry, at and stable surface.
• Avoid contact with the steam from the appliance’s spout.
Take care when pouring or relling after boiling.
• To prevent boiling dry, do not ll the appliance with water
less than the minimum ll level as indicated on the
appliance.
• Use the appliance to heat only water.
• Do not interfere with the normal working of the switch.
• Always keep the appliance out of the reach of small children.
Children should be taught about the dangers of boiling
water.
• This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children unless they are older than 8 and supervised.
• Children should be supervised to ensure that they do not
play with the appliance.
• If the mains cable is damaged it must be replaced by the
manufacturer, its service agent, or similarly qualied persons
in order to avoid a hazard.
• Do not let the mains cable hang over the edge of the work
surface or allow it to touch hot surfaces or sources of heat or
ame.
• This appliance is intended for indoor household use and similar
applications such as:
- farm houses and by clients in hotels, motels and other
residential type environment;
- bed and breakfast type environment;
- catering and similar non-retail applications.
UNPACKING
Remove all items from the packaging. Retain the packaging. If
you dispose of it please do so according to local regulations.
The following items are included:
Main Unit Kettle Stand
PRODUCT OVERVIEW
Lid
Handle
Spout
Water Fill
Level
Kettle Stand
Power Switch
Mains Cable
Open Button
MAX
1.7L
0.5L
MIN
6
5
4
3
Place the Kettle Stand on a rm,
stable and dry work surface.
Push the power switch down to the ON position (indicated by
the symbol ‘I’).
Place the kettle on its stand. Connect the stand’s mains cable
to the mains socket.
BOILING WATER
Visit Partmaster.co.uk today for
the easiest way to buy electrical
spares and accessories. With over
1 million spares and accessories available we can deliver direct to
your door the very next day. Visit www.partmaster.co.uk or call
0844 800 3456 (UK customers only). Calls charged at National Rate.
IB-L17SKBK_C_GR_R14-140227V1
DSG Retail Ltd. (co. no. 504877)
Maylands Avenue, Hemel Hempstead, Herts., HP2 7TG, UK
USING THE MAINS CABLE
Extend the mains cable in the kettle stand to the required
length. Insert the mains cable in the slot in the stand. For
safety it is recommended that the length of exposed mains
cable is kept as short as possible.
FIRST TIME USE
Clean your kettle by boiling a full kettle of water twice and
then discarding the water.
This kettle must only be used with
the stand provided.
If the kettle is overlled, boiling water may be
ejected from the spout and cause scalding.
FILLING THE KETTLE
Grip the handle and press the Open Button to open the lid.
Fill the kettle with the required amount of water. Do not
exceed the maximum ll level (Max 1.7L) as indicated on the
Water Fill Level. Always ensure the kettle is lled past the MIN
as indicated on the Water Fill Level.
Slot
For general information about this appliance
and handy hints and tips, please visit
www.knowhow.com/knowledgebank or call 0844 5611234.
L17SKBK_C_GR_R14_Final140227.pdf 1 27/02/2014 5:38 PM

0.5L
MIN
4
3
• Never open the lid while the water is
boiling. The steam coming out from the
kettle is very hot.
• In case you accidentally operate the kettle
without water, its protection mechanism
will not allow you to switch on the power.
The power switch will light up.
0.5L
MIN
5
4
3
WHEN THE WATER HAS BOILED
The kettle will automatically switch o (indicated by the
symbol ‘0’ ).
• Ensure that the switch is not obstructed
and the lid is rmly closed. The kettle will
not turn o if the switch is obstructed or
if the lid is open.
• After removing the kettle, there may be
some water on the surface of the stand.
This is condensation from the steam after
boiling. This is normal and should not be
a cause for alarm.
DESCALING THE KETTLE
Depending on the hardness of the water in your area, limes-
cale may be deposited on the heating element and the inside
of the kettle. This normal build-up is not harmful to health but
an excessive amount of scale may affect the performance of
the kettle.
To descale, ll the kettle with distilled water up to three-quar-
ters of the Max level and bring the water to boil. After the
kettle has switched off, add a descaling solution. Never
attempt to descale the kettle by chipping or scraping with a
sharp implement.
SPECIFICATIONS
Mains supply: 220-240V
Power consumption: 2520-3000W
We continually strive to improve our products. Specications
may change without prior notice.
CLEANING THE KETTLE
The kettle exterior should be cleaned with a soft damp cloth.
Do not use abrasive cleaners or scouring pads which may
damage the nish of the kettle.
Never immerse the kettle or the stand in water and always
keep the electrical contacts and the power connector hole
dry. Always disconnect from the mains before cleaning the
stand.
Do not insert any foreign objects or allow any
liquid to spill into the Power Connector Hole.
Power Connector Hole
Ensure the kettle is cool before removing the lter.
CLEANING THE REMOVABLE SCALE FILTER
To prevent loose particles of limescale being poured into
your beverage, your kettle is tted with a scale lter. You
may remove the lter and t it back in after cleaning.
1. To remove the lter, open the lid.
2. Grip the lter’s lip rmly and pull upwards.
3. Wash the lter under running water.
4. Slot the lter into the grooves inside the spout.
5. Push (gently) into place. The symbol on the product or its packaging
indicates that this product must not be disposed of
with your other household waste. Instead, it is your
responsibility to dispose of your waste equipment
by handing it over to a designated collection point
for the recycling of waste electrical and electronic
equipment. The separate collection and recycling of
your waste equipment at the time of disposal will
help conserve natural resources and ensure that it is
recycled in a manner that protects human health
and the environment.
For more information about where you can drop o
your waste for recycling, please contact your local
authority, or where you purchased your product.
L17SKBK_C_GR_R14_Final140227.pdf 2 27/02/2014 5:38 PM