Logik L90CHDG11 User manual

90cm Glass
Chimney Hood
Instruction Manual
L90CHDG11

Contents
Unpacking..................................................................................................................................... 4
Product Overview......................................................................................................................... 5
Modes of Operation ..................................................................................................................... 6
Air Extraction..............................................................................................................................................................6
Air Recirculation........................................................................................................................................................6
Operation ...................................................................................................................................... 6
To Select the Fan Motor Speed............................................................................................................................6
Hob Lighting ..............................................................................................................................................................6
Cleaning and Maintenance.......................................................................................................... 7
Grease Filters..............................................................................................................................................................7
Cleaning the Grease Filters by Hand .................................................................................................................8
Cleaning the Grease Filters in the Dishwasher ..............................................................................................8
Carbon Filter Usage .................................................................................................................................................9
Replacing Carbon Filters........................................................................................................................................9
Changing the Lamps...............................................................................................................................................9
Hints and Tips ............................................................................................................................. 10
If Cooker Hood Does Not Operate .................................................................................................................. 10
Technical Specication............................................................................................................... 11
Installation .................................................................................................................................. 12
Product Overview..................................................................................................................................................12
Safety Distance Between Hob and Cooker Hood ......................................................................................14
Connection for Air Extraction ...........................................................................................................................15
Mounting the Cooker Hood .............................................................................................................................. 16
Safety Warnings.......................................................................................................................... 18

4
4 x 8mm Screws X 4
PN: S4/8
Aluminium
Backing X 4
PN: SSB
Adapter X 1
(for reducing outlet diameter
from 150-120mm)
PN: AD
Internal Chimney X 1
PN: LIC90CHG
External Chimney X 1
PN: LEC90CHG
Glass X 1
PN: LGS90CHG
T-shape Plastic
Glass Plug X 4
PN: TPGP
4 x 22mm Screws X 4
PN: S4/22
Hanging Plate
(for mounting product on the wall)
PN: HP-U-01
External Chimney Connection Plate
(for xing external chimney on the wall)
PN: HP-EC-01
Internal Chimney Connection Plate
(for xing internal chimney on the wall)
PN: HP-IC-01
4 x 30mm Screws X 2
PN: S4/30
4 x 40mm Screws X 7
PN: S4/40
Thank you on the purchase of your new Logik Chimney Hood.
We recommend that you spend some time to read this manual in order to fully understand
how to install and operate it correctly.
Read all the safety warnings carefully before use and keep this manual for future reference.
Unpacking
Remove all packaging from the unit. Retain the packaging. If you dispose of it please do so according to local
regulations. The following items are included:
If items are missing or damaged, please contact Partmaster (UK only).
Tel: [phone] for assistance.
Ф8 x 40mm
Plastic Wall Plug X 9
PN: PWP75/37
Instruction Manual
PN: L90CHDG11-004
Drill Template
PN: DNT-L90CHDG11
Main Unit
3388C2
5-Ø8
90cm Glass
Chimney Hood
Instruction Manual
L90CHDG11
Pls help check alignment & fonts
Pls help check alignment & fonts

5
Product Overview
Control Panel
1. OFF button
2. Motor speed buttons
3. Lamp button
12 3
1
2
3
6
1. Recirculation Vents
2. Internal Chimney
3. External Chimney
4. Control Panel
5. Illumination
6. Aluminium Filter
4
5

6
Air Recirculation
The air is drawn in and cleaned first by the grease filters and then by a carbon filter. The
cleaned air is then recirculated back into the kitchen through the recirculation vents in
the top of the cooker hood chimney.
Modes of Operation
The cooker hood works with
Air Extraction
The air is drawn in and cleaned by the grease filters and directed outside.
Having a non-return flap fitted in the ducting ensures that air, once ducted to the
outside, cannot get back into the room again.
The flap is closed when the cooker hood is switched off.
When the cooker hood is switched on, the non-return flap opens for the cooking
vapours to be ducted.
There must be adequate ventilation of the room when the cooker hood is used at the same time as
appliances burning gas or other fuels.
• Carbon filters are available as an optional extra, see rear page for ordering details.
• Before using the cooker hood in recirculation mode, ensure that the carbon filters are in place.
See “Cleaning and Maintenance”
Operation
To Select the Fan Motor Speed
1. The unit has 3 motor speeds “1” , “2” and “3”.
2. For short periods of cooking food with intensive vapours and a strong aroma, e.g. when searing meat, you
may wish to select the highest setting “3”.
3. To turn the motor fan off, press the OFF button.
Hob Lighting
The hob lighting can be switched on and off independently of the fan by pressing the LAMP button.

7
Cleaning and Maintenance
• All external surfaces and controls can be cleaned using a little washing-up liquid applied with a damp soft
sponge or cloth.
Grease Filters
The re-usable metal grease filters in the appliance remove solid particles (grease, dust, etc.) from the kitchen
vapours, preventing soiling of the cooker hood.
The grease filters should be cleaned regularly (at least every 3-4 weeks) to avoid a build-up of grease.
1. To take out the grease filter, press the plastic catch.
2. Pull aluminium filter downwards.
• Before any cleaning or maintenance work is carried out, disconnect the cooker hood from the
mains power supply. Ensure that:
– it is switched off at the isolator, or
– it is switched off at the wall socket and the plug is withdrawn, or
– the fuse from the fused spur connection unit is withdrawn, or
– the mains fuse is disconnected.
• The surfaces and controls are susceptible to scratches and abrasions. Please observe the following
cleaning instructions.
Do not use:
• cleaning agents containing soda, acids, chlorides or solvents,
• abrasive cleaning agents, e.g. powder cleaners or cream cleaners and abrasive sponges, as well as
pot scourers or sponges which have been used previously with abrasive cleaning agents as these
will damage the surface material.
Only use a damp cloth as water could get into the unit and cause damage.
An dirty filters is a fire hazard.
To avoid damaging the filters or the hob
below, make sure you hold the filters
securely at all times when handling them.
• Wipe dry using a soft cloth.
1
2

8
• After cleaning, leave the filters to dry on an absorbent surface before replacing them.
• When removing the filters for cleaning, also clean off any residues of oil or fat from the now accessible housing
to prevent the risk of these catching fire.
When putting the grease filters back in position, ensure that the locking clips are facing down towards
the hob.
Cleaning the Grease Filters by Hand
• Clean the filters with a soft nylon brush in a mild solution of hot water and a little washing-up liquid. Do not
use “neat” washing up liquid.
Cleaning the Grease Filters in the Dishwasher
• Place the filters as upright as possible in the lower basket, with the short sides upright, and wash in
a 65°C programme, ensuring the spray arm is not obstructed.
• Use a mild dishwasher detergent.
Do not use:
• Cleaning agents containing descaling agents.
• Powder cleaners, cream cleaners or abrasive all-purpose cleaners.
• Oven cleaners.
Depending on the cleaning agent used, cleaning the filters in a
dishwasher can cause permanent discolouration to the surface.
However, this will not affect the functioning of the filters in any way.

9
Carbon Filter Usage
Your product is compatible with one type of carbon filter (carbon filter is not provided).
• Before installing or replacing the carbon filters, you should switch off and disconnect the electricity supply.
• The carbon filters should never be washed.
• The grease filters should be installed on the product even when carbon filters are not being used.
Do not use your product without the grease filters.
Replacing Carbon Filters
• It is necessary to install 2 carbon filters to your
product.
• Remove grease filters see page 7 for detail.
• To attach the carbon filter, place them on the
connection channels on the motor and turn the left
hand filter anticlockwise and the right hand filter
clockwise.
• In order to remove filters, turn the left hand filter
clockwise and the right hand filter anticlockwise.
• Replace the carbon filters when they no
longer absorb kitchen odours effectively.
They should, however, be replaced at
least every 3 months to prevent a risk of
fire.
• Used carbon filters can be disposed of
with the normal household waste.
Please make sure you hold the cover ring
and glass securely at all time when handling
them.
• Replace all the grease filters to the main unit.
Changing the Lamps
1. Disconnect the electricity supply.
2. Remove the lamp cover ring and the glass.
3. Replace with a 20W 12V halogen light.

10
Hints and Tips
Problem Solution
Cooker hood does not operate
• Check Electric connection.
(The supply voltage should be 220-240 V. The cooker hood must
be connected to an earthed socket.)
• Check motor speed selector.
(Motor speed selector should be in position I, II or III.)
Lamp does not light
• Check Electric connection.
(The supply voltage should be 220-240 V. The cooker hood must
be connected to an earthed socket.)
• Check lamp switch.
(Lamp switch should be in the on position.)
• Check lamps.
Air suction of cooker hood is weak
• Check aluminium filters.
(Aluminium grease filters should be washed once a month under
normal conditions.)
• Check air outlet chimney.
(Air outlet chimney should be open.)
• Check carbon filters.
(If the unit operates with carbon filters, they should be replaced
quarterly.)
If Cooker Hood Does Not Operate
Before Contacting Service:
Be sure that the mains plug is connected to the mains socket and the fuse in the installation is in good condition,
check your cooker hood according to the above table. If the problem continues, contact your retailer or an
authorised service agent.