Logitech Z200 User manual

Z200 STEREO SPEAKERS
HAUT-PARLEURS STÉRÉO Z200
Complete Setup Guide
Guide d’installation complet

English 3
KNOW YOUR PRODUCT
Left speaker
Headphone jack
DC power plug
Right speaker
Tone control
Power and volume
controls
3.5mm auxiliary cable
(audio source 1)
3.5mm auxiliary input
jack (audio source 2)
AC power adapter

English 4
CONNECT THE SPEAKERS
1. Connect the DC power plug to the back of your right speaker and connect your AC adapter
tothe electrical outlet.
2A. Connect to the 3.5 mm audio jack on your source device using the attached 3.5mm auxiliary
input on the right speaker.
2B. You can also connect a device to the auxiliary input port on the front of the right speaker.
3. (Optional) Connect your headphones to the headphone jack on the front of the right speaker.
4. Turn the speaker on using the power knob.
2A
2B
4
1
3
3.5mm

English 5
www.logitech.com/support/Z200
ADJUST THE VOLUME/TONE
1. Increase (or decrease) the volume of speakers by rotating the control knob clockwise (counter-clockwise)
on the right speaker.
2. Scroll the tone control wheel on the side of the right speaker to increase (or decrease) the bass level.
21
- +
TONE