Logitech FLIGHT YOKE SYSTEM User manual

FLIGHT YOKE SYSTEM
Professional Yoke and Throttle Quadrant Simulation Controller
USER GUIDE
logitechG.com

3
4ENGLISH
16 DEUTSCH
29 FRANÇAIS
42 ITALIANO
55 ESPAÑOL
68 PORTUGUÊS
81 NEDERLANDS
94 SVENSKA
107 DANSK
120 NORSK
133 SUOMI
146 ΕΛΛΗΝΙΚΆ
159 ПО-РУССКИ
172 PO POLSKU
185 MAGYAR
198 ČESKÁ VERZE
211 SLOVENČINA
224 УКРАЇНСЬКА
237 EESTI
250 LATVISKI
263 LIETUVIŲ
276 БЪЛГАРСКИ
289 HRVATSKI
302 SRPSKI
315 SLOVENŠČINA
328 ROMÂNĂ
341 TÜRKÇE
ةيبرعلا 354

4English
LEFT HANDLE
8-way point of view hat switch
2-way rocker switch
Single-function button
(back of left handle)
RIGHT HANDLE
2x2-way rocker switches
Single-function button
3-position Mode switch
(back of right handle)
CHRONOGRAPH
Accurate time and stopwatch function to time
each leg of your ight.
Display also indicates which programming mode
is selected.

5English
GETTING STARTED: QUADRANT
LEVER KNOBS
Detachable lever knobs to congure
any combination of throttle, aps,
mixture or prop pitch
LEVERS
Smooth-travel levers
with 0 button detent
THREE 2-WAY ROCKER SWITCHES

6English
INTRODUCTION
Congratulations on buying the Logitech G Flight Yoke System. The Flight Yoke features
realistic controls congurable for all the major ight simulation software to make
your ying experiences more realistic.
FEATURES:
• 8-way point of view hat switch
• 6 x 2-way rocker switches
• 2 x Single-function buttons
• 3-position mode switch
• Downloadable software to program and customize controls and to save
personalized proles.
INSTALLING THE FLIGHT YOKE AND THROTTLE QUADRANT
First, x the Flight Yoke to your table or desk by
inserting the prongs of the mounting clamp into
the holes on the yoke base and then tightening
the screw mechanism until the yoke is rmly attached
(be careful not to overtighten the screw as you may
damage the clamp). Next, screw the mounting plate
to the Throttle Quadrant using the four screws
provided. You can screw the plate to one of two sides
of the quadrant depending on how you want
to mount the quadrant - either in front and
below your table or on top of it. Please note that whichever way you choose
to mount the quadrant, ensure that as you look at the unit the rocker switches are
at the bottom.
Now tighten the throttle unit clamp’s screw mechanism until it is rmly attached
to your table. You can also position the Throttle Quadrant on the left or right side of
the Flight Yoke.

7English
Now, connect the Throttle Quadrant to the Flight Yoke with the
PS/2 connector provided.
Use the integrated USB Hub on the side of the Flight Yoke to easily
connect other parts of the Logitech G Flight range of products,
such as additional Flight Throttle Quadrants, Flight Rudder Pedals,
or other peripherals.
INSTALLATION FOR WINDOWS®10, WINDOWS®8.1
AND WINDOWS®7
DRIVER INSTALLATION
1 Visit logitech.com/support/yoke to download the latest drivers and software
for your operating system.
2 With device disconnected, follow the onscreen instructions to complete
the installation.
3 At the Driver Setup screen, only when prompted, insert USB cable into one of
your computer’s USB ports, then click Next.
4 At the Driver Setup screen, click Next to test your controller.
5 Follow the on screen prompts to test the controls and verify device operation.
After the test, click OK.

8English
IMPORTANT INFORMATION
Driver updates
From time to time there may be updates to the driver and programming software for
this product. You can check for the latest software updates by visiting the Logitech
website (support.logitech.com).
Enabling your controller in the game
Most games support game controllers, but typically default to the mouse and
keyboard until you go into the option menu within the game. The rst time you start
a game after installing your controller, go to the options menu within the main menu
of the game and make sure your controller is set up correctly. If you are having trouble
working out how to do this, or if you’re unsure whether the game itself supports game
controllers, then please refer to the user manual of that game for more help.
TECHNICAL SUPPORT
Online Support: support.logitech.com
PROGRAMMING YOUR LOGITECH G PRO FLIGHT YOKE AND THROTTLE
QUADRANT
The Pro Yoke System’s buttons, controls and axes correspond to commonly used
functions in Microsoft FS9 and FSX according to the tables below.
As with any software, if you wish to change the function of a button or control, you
will need to change the settings of the game software.

9English
CONFIGURING YOUR FLIGHT YOKE AND THROTTLE QUADRANT FOR
MICROSOFT FLIGHT SIMULATOR 9 AND FSX
The Flight Yoke System’s buttons, controls and axes correspond to commonly used
functions in Microsoft FS9 and FSX. As with any software, if you wish to change the
function of a button or control, you will need to change the settings of the game
software.
Once you have done this, simply nd the command that you want to assign to your
controller from the list of commands, click it and then click the Change Assignment
button. A window will appear asking you to move the part of your controller that
you want to assign to that command - press/move the button/axis that you want to
assign to that command and then click OK.
Tip: You may nd that when you assign the levers on the quadrant to a command,
that they don’t appear to work when you test them in the game. If this happens then
you must look in the Sensitivities screen (Flight Simulator 2004) or the Calibration
tab of the Controls screen (Flight Simulator X) of the game, select the axis command
in the list there and ensure that the Sensitivity isn’t set too low (set the horizontal
sensitivity slider control to around 70%).

10 English
PROGRAMMING YOUR FLIGHT YOKE AND THROTTLE QUADRANT WITH
LOGITECH SOFTWARE
Introducing Logitech Programming Software
Software can be downloaded to congure your Flight controller for enhanced
functionality. It delivers a powerful set of features, allowing you to program your
device with the ultimate conguration for total interaction. For a complete guide on
how to program your Logitech G Flight controller, visit support.logitech.com or look at
the help tab on your app menu.
Software features:
• Quick and easy setup in any game
• Personalize the controller settings for your favorite games
• Congure your controller with an on-screen 3D model and interface
• Multiple setup option for each controller - ideal if a controller is used by several
people and you need more than one prole per device
• Program special moves with sophisticated timing features
• Download the latest drivers and software from http://www.logitech.com/
support/yoke

11 English
FUNCTION OVERVIEW
BUTTON 1
BUTTON 2
MODE SELECTOR
T1 = BUTTON 3
T2 = BUTTON 4
T3 = BUTTON 5
T4 = BUTTON 6
T5 = BUTTON 7
T6 = BUTTON 8
POV
CHRONOMETER DISPLAY
FUNCTION STOPWATCH/CLOCK
STOPWATCH START/STOP
STOPWATCH RESET

12 English
FLIGHT YOKE CONTROLS AND CORRESPONDING FUNCTIONS
IN MICROSOFT FLIGHT SIMULATOR
Function Default function in FS9 and FSX
Yoke axis X axis Ailerons
Y axis Elevator
Main Buttons Button 1 Brakes (apply/release)
T1 (button 3) Elevator trim down
T2 (button 4) Elevator trim up
T3 (button 5) Flaps retract incrementally
T4 (button 6) Flaps extend incrementally
T5 (button 7) Knee board display/hide
T6 (button 8) Landing gear up/down
Button 2 Views (cycle)
POV Panoramic viewing
Other Controls Mode switch Switch Mode when programming
software is running
Clock Buttons Function Clock/stopwatch swap
Start/Stop Start/stop stopwatch
Reset Reset stopwatch

13 English
FUNCTION OVERVIEW
T1 = BUTTON 15
T2 = BUTTON 16
T3 = BUTTON 17
T4 = BUTTON 18
T5 = BUTTON 19
T6 = BUTTON 20
Z BUTTON
RX BUTTON
Z AXIS
RX AXIS
RY AXIS
RY BUTTON

14 English
QUADRANT CONTROLS AND CORRESPONDING FUNCTIONS IN MICROSOFT
FLIGHT SIMULATOR
Function Default function in FS9 and FSX
Quadrant Axis Z axis Throttle
Rx axis Flaps
Ry axis Spoiler
Axis buttons Z button Assignable in game
Rx button Assignable in game
Ry button Assignable in game
Toggle switches T1 (button 15) Assignable in game
T2 (button 16) Assignable in game
T3 (button 17) Assignable in game
T4 (button 18) Assignable in game
T5 (button 19) Assignable in game
T6 (button 20) Assignable in game

15 English
HOW TO ASSIGN FLIGHT YOKE CONTROLS TO FLIGHT SIMULATOR FUNCTIONS.
If you wish to change the controls or set up the additional buttons that have not
been assigned by Flight Simulator automatically, then you must use the Assignments
(Flight Simulator 2004) or Controls (Flight Simulator X) screen within the game.
This is accessed from the Settings menu within the game.
When you access the Assignments/Controls screen in Flight Simulator, ensure that
the Logitech G Flight Yoke is selected in the option labelled Joystick Type. If you wish
to reassign any of the axes on your controller, (the yoke itself or the levers on
the throttle quadrant) you must select Joystick Axes (Flight Simulator 2004)
or Control Axes (Flight Simulator X) at the top of the window. If you wish to reassign
any of the buttons on your controller, you must rst select the Buttons/Keys tab at
the top of the window.