Lolly & Me Ellery Installation guide

Please follow contact instructions on page
Ellery
Changing Table
Adaptable as Your Child Grows Up
Assembly Instruction Manual
Questions? Call Us at 1-800-515-4056
Website: www.lollyandme.com
Adult assembly required due to the presence of small parts, sharp points & sharp edges.
Before assembly, read these instructions. Make sure all pre-assembled parts are tight. Store this instruction manual for future reference.
Our goal is to improve the assembly process for the customer. If you have any questions during assembly or you are missing parts, please contact us
directly. Do not return product parts to the retailer before contacting our customer service department for assistance.
10

2
Congratulations on Your Purchase!
Thank you for choosing a Lolly & Me product. Don’t worry
about the assembly. Inside you will find understandable step-
by-step instructions with clear illustrations—it’ll be a piece of
cake! If you get stuck, ring us up at 1-800-515-4056. Need a
replacement part or is a part missing? Just call us and we’ll get
one sent off to you right away.
Remember to complete your product registration card and
mail it in to activate your product’s one year limited warranty.
You can also go online to www.lollyandme.com and complete
it there. Then—and this is the good part— you will be regis-
tered in our quarterly drawing for prizes that will look great
in your little one’s nursery!
Sincerely, Lolly & Me
Questions? Call Us at 1-800-515-4056
Website: www.lollyandme.com
Email: [e-mail]

Always secure this pad to the changing surface by restraint harness. See
To make it easier to bulid your changer have a friend help during the assembly.
To prevent death or serious injury, always keep child within arm’s reach.
Assemble on soft surface to prevent damage to the product finish.
Ensure that all parts and components are located before beginning assembly.
Changing Table Warnings
Read all instructions before use of changing table.
Before each usage or assembly, inspect unit for damaged hardware, loose joints, loose bolts
and other fasteners, missing parts, or sharp edges. DO NOT use unit if any parts are missing
or broken. Ask your dealer or call
LOLLY & ME at 1-800-515-4056 or write to 10301 Bren Road West,
# 0-379 Minnetonka, MN 55343
Periodically check all bolts and screws to maintain the stability of your changing table.
Be sure to use furniture wall straps to help reduce the risk of tip-over.
Use of tip-over restranits may only reduce, but not eliminate, the risk of tip-over.
Never allow children to climb or hang on drawers, doors, or shelves.
instruction for more details.
LOLLY & ME at 1-800-515-4056 or write to 10301 Bren Road West,
Serious or fatal crushing injuries can occur from furniture tip-over. To help prevent tip-over
DO NOT overload drawer
3

Assemble on soft surface to prevent damage to the product finish.
Need a friend to help during assembly.
Ensure that all parts and components are located before beginning assembly.
Each of these added steps and helpful hints should make the process easier.We would like
you to implement these into your assembly guides.If there are other steps or hints that you
are currently using that make the experience easier please continue those in combination
with these suggestion.
•
• We would like these steps to be implemented into your products for modular and promotions.
These can be running changes to your current g uides.Once the steps have been added to your
instruction guides we would like to have copies of all your guides sent to us for reference.
Our goal is to improve the assembly process for the customer.
# 0-379 Minnetonka, MN 55343
LOLLY & ME at 1-800-515-4056 or write to 10301 Bren Road West,
Fall Hazard - use of the product without this may result in death or serious injury to your child from falling.
Never open more than one drawer at a time.
4

Instructions for Assembly
Ellery
Changing Table
Adaptable as Your Child Grows Up
OK
Let’s Put This Baby
Together!
5

6

Wall Strap Kit (x1)
s T
U
7

6*20 Short Wood Dowel (*12)
M6x3 8mm Bolt (x14 )
M6x3 2mm Bolt (x6 )
M6x10 mm Bolt (x8 )
8
66*66*3mm Tray Bracket (*2)
8*30 Wood Dowel (*2)
8*25mm Drawer Screw (*30)
M4*25mm Drawer Knob Screw (*6)
M6*25MM Bolt (*8)
M6x10 mm Bolt (x8 )

STOP
IF YOU EXPERIENCE ANY
ISSUES WITH THIS PRODUCT
BEFORE YOU
RETURN THIS TO
THE RETAILER
PLEASE FOLLOW THE
PROCEDURES LISTED ON
THE FOLLOWING PAGE
9

REPRESENTATIVE.
O THE CRIB ITSEL
PRODUCT ASSITANCE PROCEDURES
IF YOU HAVE ANY QUESTIONS DURING ASSEMBLY OR YOU ARE MISSING PARTS, PLEASE
CONTACT US DIRECTLY.
PROCEDURES TO FOLLOW SHOULD YOU HAVE ANY QUESTIONS:
FOR THE BEST AND MOST TIMELY SERVICE PLEASE CONTACT US VIA E-mail:[email protected]
phone us at 1-800-515-4056 or write to 10301 Bren Road West, # 0-379 Minnetonka, MN 55343
PLEASE PROVIDE THE FOLLOWING INFORMATION IN YOUR E-mail.
1. YOUR NAME
2. ADDRESS
3. BEST DAY TIME PHONE NUMBER
4. PLACE AT DATE OF PURCHASE
5. MODEL NUMBER, NAME AND COLOR OF YOUR PRODUCT
6. MANUFACTURER’S CODE (THE MANUFACTURER’S CODE CAN BE FOUND ON A LABEL
AFIXED TO THE BOX AS WELL AS A LABEL AFIXED T F.)
7. SHORT DESCRIPTION OF THE ISSUES AND ATTACH PHOTOS IF POSSIBLE.
PLEASE INCLUDE SPECIFIC PART NUMBERS IN QUESTION FOR MORE EFFICIENT SERVICE.
SOMEONE WILL CONTACT YOU VIA E-mail OR PHONE TO HELP YOU WITH YOUR ISSUES.
IF YOU DO NOT HAVE INTERNET ACCESS, PLEASE FAX THE ABOVE INFORMATION TO :
612-573-6678
IF YOU DO NOT HAVE INTERNET OR FAX ACCESS, PLEASE CAL US AT 1-800-515-4056 AND BE
SURE TO HAVE ALL THE ABOVE INFORMATION TO GIVE TO THE CUSTOMER SERVICE
10
WE ARE HERE FOR YOU!

8*25MM Drawer Screw (*4)
6*25mm Short Wood Dowel (*4)
11

12

13

14

15

16
M6x3 8mm Bolt (x3 )

17
M6x3 8mm Bolt ( x 4 )

18

M6x3 8mm Bolt (x7)
19

M6x3 2mm Bolt (x6)
20
*2