Attach the long rail to the short rail second
hole down from the top. *
Repeat so you have a set of two legs.
Let’s start assembling!
Assemble the Legs
Grab the long and short rails, medium bolts &
nuts. Secure panel to corners of rails by passing
the bolt through the panel and rails below.
*Don’t tighten down the bolts
too much, we’ll go back and
do that at the end.
Your table is now complete. Go ahead, tighten
down all the bolts and give yourself a high five!
Step 1
Complete the Base
Step 2
Add the Panels
Step 3
Tighten Up
Step 4
t
r
i
-
j
o
i
n
t
short rail
long rail
Finally, grab those short bolts and secure the
inside corners to the rail below.
Face legs towards each other, keeping the long
rail on the outside of both sides.
long rail
Stack the medium rail on top of the long rail,
attaching to the inside of short rail so all three
overlap creating a tri-joint.
Repeat on other side
Grab your panels
b
o
l
t
p
a
n
e
l
t
o
o
u
t
s
i
d
e
c
o
r
n
e
r
