■HOW TO USE THE GAME
FUNCTION
• A slot machine type game can be played.
■HOW TO SET THE ALARM
Rule of the Game
• To win, you should press the button to stop
the sequential display of Mickey Mouse faces
(Cal. W590)/poses (Cal. W591) to show on
the display the face/pose that was indicated
as the target before the game starts.
• After the game is over, one of the two different
Mickey Mouse faces/poses appears depending
on whether you have won or lost.
• When you have won, the melody of “Mickey
Mouse March”is played as the winning face/
pose appears, lasting for 26 seconds.
1. Press button “A” to show the game display.
The target face/pose appears.
2. Press button “B” to start the game.
Several faces/poses are shown sequentially.
3. Press button “B” to stop the sequential
display.
4. Either the face/pose when you have won
or that when you have lost is shown, and
then, a new target face/pose will appear.
5. Press button “B” to restart the game, or
press button “A” to change the display to
another as you require.
Game Operation
Notes:
1. If you have won, the winning faces/poses
appear alternately at one-second intervals
and the melody sounds for 26 seconds. To
stop them manually, press button “A”, “B”
or “C”. A new target face will be displayed
immediately.
2. If the watch is left untouched in the sequential
display, it will automatically return to the
target face/pose in 1 to 2 minutes.
3. To win more easily, check the number of
target face/pose as a cue to press the
button timely.
B
C
A
Face/pose No.
B
CA
“A” (AM)/“P”
(PM) mark
Hour Minutes
Hourly time
signal mark
Alarm
mark
1. Press button “A” to show the alarm display.
2. Press button “A” for 2 seconds to show the
alarm setting display. The hour digits
(and “A”/“P” mark if the time is set in the
12-hour indication) start flashing.
3. Press button “B” to select the digits to be
adjusted (flashing).
MinutesHour →
→
4. Press button “C” to set the digits. One
digit is advanced with each press of the
button. The digits move quickly by keeping
the button pressed.
5. After all the adjustments are completed,
press button “A” to return to the alarm
display.
3. If the watch is left untouched in the alarm
setting display with the digits flashing, it
will automatically return to the alarm display
in 1 to 2 minutes.
Notes:
1. When the time function is displayed in the
24-hour indication, the alarm is also displayed
in the 24-hour indication.
2. When setting the hour digits in the 12-
hour indication, check that “A” (AM)/“P ”
(PM) mark is correctly set. In the 24-hour
indication, there is no indication.
• With each press of button “B” in the alarm
display, the engagement and disengagement
of the alarm and hourly time signal are made
as follows.
Engagement/disengagement of the
alarm and hourly time signal
Alarm mark Hourly time
signal mark
Hourly time signal engaged1
• At the designated alarm time, the melody
of “Mickey Mouse March” is played for 26
seconds and stops. To stop it manually,
press button “A”, “B” or “C”.
• The alarm can be tested by keeping button
“B” pressed in the alarm display.
4Neither engaged
Alarm engaged3
Both engaged
2
■NOTE ON UNUSUAL DISPLAY
While in the time/calendar setting display,
the display as shown below will appear if
both buttons “B” and “C” are pressed at the
same time. This is not a malfunction. Press
button “A”, “B” or “C” to return to the time
display, and then set the time/calendar again.
[All the segments lighting up]