Lovencare Elite TRC 30 User manual

PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE

Congratulations on your new quality Love N Care product from our exclusive range of baby products.
This exceptional design combines the most unique features that any baby product oers.
We are condent that you will appreciate its many highlights, including its reliability and durability.
Your new product has been manufactured to comply with the Highest Quality Standards and comes
with a 12-month warranty.
As you will soon learn there are many more great features about your new Love N Care product.

Safety guidelines and instructions must always be followed before making use of this product,
please retain these instructions for future reference.
This product complies with product standard:
AS/NZS 2172:2010 Cots for household use - Safety Requirements
WARNING
This cot has been designed for a child up to 25kg
Do not leave your child unattended when the dropside is in the lower position
RECOMMENDED MATTRESS SIZE: This cot has been manufactured for use with a mattress which measure
760mm wide by 1310mm long and 130mm in thickness.
sides and ends of the cot will not exceed 40mm. This is to minimize the risk of a childs limb becoming
is greater than 500mm with the mattress base in the lower position to minimise the risk of a child climbing
or falling out of the cot.
WARNING TO PREVENT FALLS, THE MATTRESS BASE OF THIS COR SHOULD BE ADJUSTED TO THE
LOWEST POSITION BEFORE THE CHILD CAN SIT UP.
The manufacturers assembly instructions must be followed in detail to ensure all the safety features of the
cot are not compromised.
Please ensure that the cot is placed at a reasonable distance from curtains, blinds, heaters and power points.
Please keep medication, string, elastic,small toys or small items, such as money out of reach from any
position in the cot.
WARNING: TO PREVENT FALLS, THE MAXIMUM MATTRESS THICKNESS SHOULD NOT EXCEED 130mm.

PARTS LIST

PARTS LIST

ASSEMBLING THE DROPSIDE
SETTING UP THE ENDS
ASSEMBLY

ASSEMBLY
ATTACHING THE DROPSIDE TO THE ENDS
ATTACHING THE DROPSIDE TO THE ENDS

ASSEMBLY
ATTACHING THE BASE TO THE ENDS AND DROPSIDE
ASSEMBLING THE FIXED SIDE

ASSEMBLY
ATTACHING FIXED SIDE
ASSEMBLING THE DRAWER

Attach the drawer bottom (M)
to drawer front (I) and drawer
Back (L)
ASSEMBLY
ATTACHING ENDS IN DRAWER
INSERTING THE DRAWER BASE