Lovencare BP 6618 User manual

BP 6618

1.

WARNING:
Prevent serious injury or death:
WARNING:
NEVER leave child unattended.
WARNING:
ALWAYS use restraint system.
WARNING:
NEVER use for a child able to sit up unassisted.
FALL HAZARD: Child’s activity may move product.
SUFFOCATION HAZARD: Never use on a
soft surface (bed, sofa, cushion), as seat may tip over and
cause suffocation.
Use only on floor. Never use on an elevated surface.
- All plastic packaging and elements which are not a part of the bouncer set should be
removed before giving it to the child.
- The bouncer must be assembled by an adult only. The product should be checked by an
adult before every use.
The bouncer set includes small parts and should be kept away from babies before it is assembled.
- Never leave the child unattended. Never use for a baby who is able to leave the bouncer
on its own.
- Use in reclined position until your child is not able to hold up head unassisted.
- Do not use if your child is able to sit upright unaided or weighs more than 9 kgs.
- Never use on a soft surface (e.g. bed), as bouncer may tip over and cause suffocation.
- Never leave the bouncer on uneven or sloping surfaces.
- Never use this product on an elevated surface e.g. table - it is dangerous. Always use it
on the floor.
- This bouncer is not intended for prolonged period of sleeping. It does not replace a bed.
Should your child need to sleep, then it should be placed in a bed.
- Always use the restraint system while child is in the bouncer.
- Never lift the bouncer using a toy bar as a handle.
- Never lift or move the bouncer when the baby is inside.
- Never use the bouncer if there are any parts missing or broken. Never use any accessories or
replacement parts unless they are ones approved by the manufacturer. Regularly check the
condition of the bouncer.
- Keep bouncer away from open fire and other sources of heat.
- If the bouncer is not used for prelonged period of time - remove batteries. After dismantling
- keep parts away from babies.
IMPORTANT! Small parts are included in the box. Product must be assembled by an adult.
WARNINGS
NEVER place a child under 5 lbs. (2.26 kg) or over 20 lbs. (9 kg) in
the product.
- Please read this instruction manual carefully before using the bouncer and keep it together
with packaging for future reference.
- Swinging unit requires 4 x LR20 batteries 1,5 V (not included).
- This bouncer is intended for children weighing up to 9 kgs.
- Actual product may differ from image shown.
2.

Parts List
A - Base support front tube
B - Base support rear tube
C - Swing control module
D- Seat frame front tube
E- Seat frame backrest tube
F- Seat support frame
G- Seat pad with padding
H- Toy bar
I - Adjustable backrest moulding
J - AC adapter (not included - Sold Separately)
E
IJ
- Actual product and Parts may differ from images shown.
Please make sure all parts are included before
proceeding to assembly
3.

Assembly
1) Assemble base support front tube and rear tube (g.1.).
Ensure the pop pins are locked in place so the front and rear
tubes are secured.
2) Connect the swing control module wire with the battery
compartment wire. Place the swing control module on the
base support tube.
IMPORTANT! Place extra wire into the wire casing on the base
support tube to avoid the wire being crushed after swing
control module is in place. Ensure the pop pins are securely
locked in place and that the swing control module cannot be
separated from the base support tube.
Fig.1.
Fig.2
Fig.3.
4.

3) Ensure that the two adjustable backrest supports are
attached to the seat support frame. Assembly as shown in
g.4. If not - follow g.4. to do it. Ensure that it is done
properly and that pop pins are locked.
4) Insert the seat frame front tube and backrest tube into
the seat support frame. Ensure that the pop pins are
locked.
5) Place the seat support frame assembled in point.4. onto
the swing control module (g.6.).
In order to disconnect swinging module from seat support
frame - release grey button (g.7.) and lift the seat frame at
the same time.
6) After proper assembly seat frame should look like in the
g.8.
Fig.4.
Fig.5.
Fig.6.
Fig.8.
Fig.7.
5.

7) In order to mount seat pad, padding and toy bar - follow as shown in pictures as below.
A
D
G
K L M N O
H
B
E F
I J
C
6.

FUNCTIONS
8) In order to adjust the backrest - press simultaneously buttons on both adjustable backrest mouldings
and set it in one of 3 possible positions.
9) Bouncer can be rotated 360 degrees around bouncer axis.
10) In order to lock swinging possibility of bouncer - set it to the central position and then move slider up
(g.11). Never block swinging when the bouncer is turned ON!
11) In order to insert safety belts follow gures: B, H-M from point 7. Remember to always adjust shoulder
and crotch belts after putting baby inside. All buckles must be locked (pictures - K and L point.7).
Fig.9.
Fig.10.
Fig.11.
7.

SWINGING UNIT
RAINBOW LIGHTS
12) Swinging unit and all functions are described and shown below (g.13.):
- In order to turn the bouncer on - press button - POWER.
- Buttons„-”i„+”(1) are used to control swinging speed of the bouncer. Press„+”to increase the swinging
speed„-” to decrease swinging speed. One of 4 speeds can be set. Because of the age of babies - speeds
does not dier much. Current speed is indicated by LED light.
- Music button (2) can be used to turn the music ON and OFF.
- Music/Volume change button (3) can be used to change current music (quick press) or to change the
sound volume level (press the button for a longer time).
- Timer is set by pressing button (4). It is possible to set one of the 3 possible timers - 10, 20 and 30 mins.
Current timer set is indicated by LED light. Deafult set - timer is turned OFF (non of the LED lights shine)
after turning ON - bouncer will swing until the power is turned OFF.
- Move detector button (5) after turning this function on - bouncer will be automatically start swinging
after detecting baby movement. Move detector option is indicated by LED light next to the button.
- Push to button (1)- Music on and Rainbow lights switch as the music, OR; No music, Rainbow lights
regularly switch for 60 seconds, then o for 30 secondes, and then circularly goes on.
- Push to button (2)- Rainbow lights just turn on, can’t be switched, either with music or w/o music.
- Reset to button (1)- Music will be changed.
Fig.13.
Fig.12.
Fig.14.
235
411
1
2
8.

BATTERIES REPLACEMENT
- Battery chamber is located on the bottom of base support front tube / on the top of Rainbow lights.
- Unscrew battery cover with phillips screwdriver. Remove cover and place 4 xLR20 batteries into
the battery chamber (g.12.)
- Rainbow lights - Operation by 3x LR6 ( AA ) batteries (g.14.)
- Close the battery chamber and tighten the screw.
ALL ACTIONS ASSOCIATED WITH BATTERY REPLACEMENT MUST BE PERFORMED BY AN ADULT
1. Insert the batteries into the chamber indicated on the packaging or the product itself. In order to insert the batteries to the chamber,
unscrew the securing cover and place the batteries in line with the polarity. After the batteries are inserted, screw the cover back on.
2. In order to take the batteries out, unscrew the securing cover, remove the batteries and close the cover again.
3. Batteries which are not suited for charging are not to be charged.
4. Chargeable batteries can be charged under adult supervision.
5. Chargeable batteries should be removed from the product before charging.
6. Batteries should be inserted maintaining proper polarity.
7. Do not mix together dierent types of batteries or new and used batteries.
8. Only use batteries of a recommended type or equivalents.
9. Depleted batteries should be immediately removed from the product.
10. Do not short circuit the battery clamps.
11. The product uses replaceable batteries.
12. The product cannot be connected to more power sources than recommended.
13. Used batteries should be thrown into specially marked containers intended
to collect used batteries and used electronic equipment.
CLEANING AND MAINTENANCE
- Keep the product in dry places. In order to keep the product attractive - avoid prelonged sun exposure.
- Check condition of the bouncer regularly. Before each use check if it is assembled regularly.
- Use only parts recommended and provided by manufacturer.
- Clean the bouncer regularly.
- In order to clean plastic parts and tubes - use damp cloth.
- Padding can be hand washed with a bit of delicate soap. Do not bleach!
- Fabric of the seat pad can be cleaned with a damp cloth.
9.