Lovencare BP 882 User manual

Instruction Manual
BP 882
Deluxe Glider Chair

Congratulations on your new quality Love N Care product from our exclusive range of baby products.
This exceptional design combines the most unique features that any baby product oers.
We are condent that you will appreciate its many highlights, including its reliability and durability.
Your new product has been manufactured to comply with the Highest Quality Standards and comes
with a 12-month warranty.
As you will soon learn there are many more great features about your new Love N Care product.

FOLLOW THE MANUFACTURER’S INSTRUCTIONS.
THE MAXIMUM WEIGHT FOR THE SEAT UNIT IS 105KG
Care should be taken whilst folding and unfolding the glider.
Ensure your child’s fingers, hands and all other body parts are clear from any moving
part when adjusting the seat or handle on your Glider.
It is unsafe to use accessories other than those supplied or approved by Love N Care.
Safety guidelines and instructions must always be followed before making use of this product,
please retain these instructions for future reference.
WARNING: TO AVOID INJURY OR DEATH:
Discontinue using the glider if damaged.
Missing parts should be replaced imeediately.
CLEANING AND MAINTENANCE
LOVE N CARE PRODUCTS HAVE ONE YEAR WARRANTY FROM THE DATE OF PURCHASE.
IT IS RECOMMENDED TO REGULARLY INSPECT AND MAINTAIN MOVEMENT OF LOCKING DEVICES AND SECURI
OF ESSENTIAL COMPONENTS.
REGULARLY CHECK ALL PARTS FOR WEAR AND TEAR.
DO NOT USE SPRAY LUBRICANTS, SIMPLY WIPE CLEAN AFTER USE.
THE SEAT LINER CAN BE CLEANED BY SPONGING WITH WARM SOAPY WATER AND A MILD DETERGENT. A MILD
DISINFECTANT MAY BE USED IF DESIRED.
STUBBORN MARKS MAY BE REMOVED WITH A NON ABRASIVE CREAM CLEANER.
VER CLEAN WITH ABRASIVE, AMMONIA BASED, BLEACH BASED OR SPIRIT TYPE CLEANERS.
ABRIC CARE
- HAND WASH ONLY
- DO NOT BLEACH
- DO NOT TUMBLE DRY
- DO NOT IRON
- DO NOT WRING
- DO NOT DRY CLEAN
NE
TY

PARTS LIST
WHEN YOU OPEN YOUR GLIDER CARTON PLEASE ENSURE
YOU HAVE ALL THE ITEMS:
1. GLIDER FRAME
2. OTTOMAN
3. CUSHION
4. 2X ARMREST
5. 4X ARMREST SCREWS
6. 2X BACKREST SCREWS
7. ARMREST ALLEN KEY
8. BACKREST ALLEN KEY
1. 2.
3. 4.
5.
6.
7.
8.
No. FIGURE SPECIFICATON QUANTITY
M8X43mm 2
1/4”X1-5/8”4
M4 1
M6 1

ASSEMBLY INSTRUCTIONS
ASSEMBLE THE FRAME &
ARMRESTS
Pull the frame (1). into the position pictured.
The backrest should be upwards and the
base should be in the downwards position.
Unzip the armrests located on each side of the
frame (1). There are 2 holes located at the top of
each armrest. Place 2 (5) Armrest screw and the
armrest (4). Repeat on both sides. Once tightened
close the zipper.

ASSEMBLY INSTRUCTIONS
ASSEMBLE THE FRAME
Pull the frame (1). into the position pictured.
The backrest should be upwards and the
base should be in the downwards position.
Place the cushion (3) over the backrest
and the bottom seat. They should
be placed over the bars as shown.
Place one (6) backrest screw on the
back of the glider chair and tighten
it with the (8) backrest allen key.
This located on the back of the frame
On the base of the cushion (3)
there are some elastic tighteners
which attach to the base of the
glider chair. Place them around
protrusion on the base.

HOW TO USE
HOW TO USE THE HANDLE:
To lock the backrest of the glider chair
pull the lever upwards
To have the glider as free owing
pull the lever downwards

Head Office:
Love N Care Pty Ltd.
297-299 Canterbury Rd, Revesby
NSW 2212 Australia
Contact No: 02 9774 4655
Fax: [phone]
Email: [email protected]
Website: www.lovencare.com.au
Contact Us
Brisbane
7-9 Eileen Street
Underwood QLD 4119 Australia
Contact No: 07 3290 4217
Fax: [phone]
Western Australia
5 Modal Crescent
Canning Vale WA 6155 Australia
Contact No: 08 9455 4972
Fax: [phone]