LOWE'S F250134 User manual

PLEASE NOTE • PLEASE NOTE • PLEASE NOTE • PLEASE NOTE • PLEASE NOTE
LOWES FRAMES
ASSEMBLY INSTRUCTIONS Page 1
P1405_Lowes Frames_INST_REVC.ai
5.12.16 pj
Please inspect and verify your kit. If you are missing items, have received damaged items or you require additional
items, please reorder in ISV and or spend management.
BACK VIEW
FRONT VIEW
60" x 74" frame F250134
48" x 74" frame F250265
10" x 10" feet F250266
ITEM REORDER#
BRACKET CORNER
ASSY
CHANNEL 48 LG
CHANNEL 60 LG
CHANNEL 74 LG
PLATE, BRACKET, CORNER
SCREW
PLATE, NUT, CORNER
10 x 10 FOOT BASE

STEP 1 There will be 2 frames to assemble, one will be
48” wide and the other 58” wide.
Slide a 74” channel frame on top of a Foot
Base, then repeat so that you have 2 vertical
channel frames in place.
STEP 2 Attach a 48” channel frame using the Bracket Corners
to the bottom part of the frame. You can start the
screws loosely into the Bracket assembly, then slide
the bracket into position in the vertical channel frame
to the desired height on the bottom part of the frame
assembly. Tighten the screws when in position.
STEP 3 Attach the other half of the 48” channel frame to the
other vertical channel frame that was made earlier
using another Bracket Corner assembly.
STEP 4 Slide your Graphic into the channel frame from the
top. When that is done, complete the frame assembly
with the other 48” channel frame being attached to
the top with 2 more Bracket Corner assemblies.
F250265
LOWES FRAMES
ASSEMBLY INSTRUCTIONS Page 2
P1405_Lowes Frames_INST_REVC.ai
5.12.16 pj
48.00
66.00

STEP 5 Repeat with the 58” Frame Assembly.
STEP 6 Place frames perpendicular to one another
when assemblies are finished.
F250134
58.00
66.00
LOWES FRAMES
ASSEMBLY INSTRUCTIONS Page 3
P1405_Lowes Frames_INST_REVC.ai
5.12.16 pj