LOWE'S F00003 User manual

Made in Vietnam
[phone] Working hours : Mon - Fri 9:00 a.m - 16:00 p.m. EST homecustomer[email protected]om
Item Number：F00003
Read instruction carefully prior to assembly.
Thank you for purchasing this quality product. Check carefully for small parts which may have come
loose during shipment. Remove all components from pack and palce table top upside down on soft
surface such as carpet or cloth to prevent scratching. Identify and count all parts as specified below.
Allen Key 3 pcsM4x58x23
1/4 x 16mm
1/4 x 40mm
24 pcs
26 pcs
Spring Washer
1/4 x Ø12 x 1mm
1/4 x Ø16 x 2mm
50 pcs
50 pcsFlat Washer
4
5
Hardware List
1 pc
1 pc
E
F
Coffee table
wood top
Coffee
table leg
G
Coffee table
stretcher
2 pcsH
Coffee
table tube
2 pcs
Parts List
Description Drawing Size Qty
NO.
2 pcs
610*559*25mm
540*530*75mm
510*495*19mm
510*45*25mm
1220*610*25mm
1605*430*75mm
1120*570*19mm
1120*45*25mm
2 pcs
A
B
End table
wood top
End table leg
C
End stretcher
4 pcsD
End tube
4 pcs

G
F
F
1
3
4
5
E
F
F
1
3
4
5
H
Leveler
1
2
4
5
[phone] Working hours : Mon - Fri 9:00 a.m - 16:00 p.m. EST homecustomer[email protected]om
Assembly Coffee Table
21
4
5
Made in Vietnam
Step 4: Turn over the table and tighten all
bolts carefully. Assembly is completed. If
levelling is necessary, adjust the levelers turn
clockwise or counter clockwise.
Step 3: Insert the Stretcher (H) into the Legs
by using Flat Washers (5), Spring Washers
(4), Bolts (2) and Allen Key (1).
Step 1: Place Table Top (E) on a flat, soft
surface such as a carpet or a cloth to prevent
scratching the table finish. Attach two Legs (F)
to the Table Top (E) by using Flat Washers (5),
Spring Washers (4), Bolts (3) and Allen Key
(1). DO NOT fully tighten the bolts.
Step 2: Attach the tube (G) to the Legs (F) by
using Bolts (2) and Allen Key (1). Connecting
to table top by using Flat Washers (5), Spring
Washers (4), Bolts (3) and Allen Key (1).

[phone] Working hours : Mon - Fri 9:00 a.m - 16:00 p.m. EST homecustomer[email protected]om
Assembly End Table
Made in Vietnam
Step 4: Turn over the table and tighten all
bolts carefully. Assembly is completed. If
levelling is necessary, adjust the levelers turn
clockwise or counter clockwise.
Step 3: Insert the Stretcher (C) into the Legs
by using Flat Washers (5), Spring Washers
(4), Bolts (2) and Allen Key (1).
Step 1: Place Table Top (A) on a flat, soft
surface such as a carpet or a cloth to prevent
scratching the table finish. Attach two Legs (B)
to the Table Top (A) by using Flat Washers
(5), Spring Washers (4), Bolts (3) and Allen
Key (1). DO NOT fully tighten the bolts.
Step 2: Attach the tube (D) to the Legs (B) by
using Bolts (2) and Allen Key (1). Connecting
to table top by using Flat Washers (5), Spring
Washers (4), Bolts (3) and Allen Key (1).
1
3
4
5
A
B
B
1
3
4
5
D
B
B
1
2
4
5
C
21
4
5
Leveler