LOXONE 100484 User manual

Need Help?
loxone.com/support
V090222
Intercom
For additional information,
declaration of confirmity, visit
loxone.com/help/intercom
Installation & electrical connection
The installation of this device has to be carried out by a
qualified person. The device has to be fitted in accordance
with building regulations for electrical and fire safety. If the
device is not installed according to manufacturers
guidelines the protection of the device may be affected.
This folder is a part of the product! Part No: 100484 (White)
Part No: 100485 (Anthracite)
Technical Specifications
Ambient temperature -20 … +40 °C / -4 … +104 °F
Dimensions 90x90x16mm /
3.55x3.55x0.63” (LxWxH)
Maintenance & Cleaning This device is free of main-
tenance and may only be
cleaned with a dry cloth.
Power supply Power over Ethernet (PoE),
typ. 48VDC
IEEE 802.3af Mode A,
power class 0
Power consumption typ. 1.7W, max. 5.8W
(incl. 3W for external devices)
Voltage output for
supplying external devices
(NFC Code Touch...)*
24VDC, max. 3W
Wire length: max. 3m / 10ft
Protection class IP34
Humidity max. 95% r.H. (non condensing)
Tree interface Connection of up to 50 Tree
devices
Wire length: max. 3m / 10ft
Loxone Electronics GmbH
Smart Home 1
4154 Kollerschlag
Austria
Loxone UK
The Forum,
Station Road,
Theale, RG7 4RA
loxone.com
* The devices connected to the 24V power output and the Tree interface of
the Intercom must remain independent of the rest of the installation. No
connection to other Tree branches, power supplies or devices may be
established, not even via the GND.
Ethernet interface 100 MBit/s This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.

Bell button Mounting
frame
Proximity
sensor
Camera Microphone
Wire cross-section
0.25 … 0.8mm² / AWG23 … 18
Stripping length 5mm / 0.2”
Temperature resistance
-40 … 105°C / -40 … 221°F
About the product
The Loxone Intercom is a compact video door bell featuring a
glass finish, illuminated bell button and proximity sensor. The
microphone is embedded into the front panel, the concealed
speakers are located on unit's left side.
The device is connected to the network and powered via
Power over Ethernet. The integrated Tree interface makes it
possible to connect an NFC Code Touch as part of an access
solution.
The device is mounted in a low-profile aluminum frame,
available in a single or double version.
Installation
Install the mounting frame on the desired installation place,
and connect it according to the product documentation.
Power up the device and pair it with your Miniserver in Loxone
Config. To finish the installation attach the Loxone Intercom
on the mounting frame.
Connection
Technical Specifications
Bell button 1 touch point, capacitive
Click feedback Yes
Speaker 2x 0.7W continuous /
2x 1W max. momentary
Microphone Digital microphone, MEMS
Camera Field of View:
120° diagonally
Resolution:
1280x720 pixel
Proximity sensor Detection range:
in direct light: 0.2m
low ambient light: 2.0m
detection angle 27°
Technology:
Infrared ToF Sensor
Mounting location with
direct sunlight
white: allowed
anthracite: not recommended
Recommended mounting
height
1.6m / 63” top edge