LOYTEC LROC-100 User manual

Installation instructions
LROC-100 Room Controller
Instructions de montage
Montageanweisung
Montagevoorschrift
Instruzioni di montaggio
Instrucciones de montaje
Monteringsanvisning
159
89
100
164
60
13
15
max 50º C
min 0º C
0,350 kg
10 - 90 %
kg
RH
LOYTEC

2 x USB-A
USB1
USB2
USB-B
2 x 10/100Base-T
(RJ45)
Ethernet1
Ethernet2
B A
M-Bus/KNX TP1 via
L-MBUSxx/LKNX-300
GND
131415
-
+
GND
EIA-485
1011 12
B A
LIOB-FT EXT1
7 8 9
CEA-709
B A
RS-485
FT
CEA-709
4 5 6
-
24-35 VDC
24 VAC
+
~~
1 2 3
POWER
microSD
Connectors
POWER 1 Power supply input EARTH GND
2 Power supply input MINUS
Can be connected to EARTH GND
3 Power supply input PLUS
Must NOT be connect to
EARTH GND
FT 4 Input EARTH GND
CEA-709 5 Input B
6 Input A
LIOB-FT 7 Input EARTH GND
CEA-709 8 Input B
9 Input A
RS-485 10 Input GND
EIA-485 11 Input +
12 Input
-
EXT1 13 Input GND
M-Bus 14 Input B
KNX TP1 15 Input A
Connectors
USB1 USB-A USB Host
USB2 USB-A USB Host
USB-B USB-B PC
Ethernet1 RJ45 10/100Base-T
Ethernet2 RJ45 10/100Base-T
microSD slot microSD card
max. 2 GB
Buttons
RESET Reset
DIAL Turn-and-Push Dial
0.2 - 2.5 mm2
7
Weidmüller
BLZP 5.08/03/180
RESET
DIAL
DISPLAY

Status LEDs
LINK GREEN Ethernet link
ACT GREEN flashing Ethernet traffic
PLC GREEN PLC normal operation
RED flashing 2 Hz PLC overload
OPC GREEN OPC client connected
GREEN flashing OPC activity
FT GREEN flashing fast Traffic on CEA-709 port
GREEN flashing 1 Hz Not commissioned
RED permanent CEA-709 port damaged
RED flashing fast CEA-709 traffic overload
LIOB-FT GREEN flashing Traffic on LIOB-FT port
RED permanent LIOB-FT port damaged
RED flashing fast LIOB-FT traffic overload
RS-485 GREEN Modbus Master link
GREEN flashing Modbus traffic
ORANGE Modbus Slave Mode
ORANGE flashing Modbus traffic Slave
RED permanent Modbus port damaged
RED flashing fast Modbus traffic overload
GREEN flashing fast Traffic on BACnet port
GREEN flashing 1 Hz Not commissioned
RED permanent BACnet port damaged
RED flashing fast BACnet traffic overload
EXT1 GREEN M-Bus/KNX link
GREEN flashing M-Bus/KNX activity
RED permanent M-Bus/KNX port damaged
RED flashing fast M-Bus/KNX traffic overload
FT EXT1
RS-485
LIOB-FT
PLC OPC
Ethernet1 Ethernet2
LINK
ACT
DISPLAY
Install the cover
LOYTEC
Please update the firmware of the device first,
see www.loytec.com/support/download
http://192.168.1.254
User: admin
Password: loytec4u

Document 88077601
06/2015
Printed in Austria
Data is subject to change
LOYTEC
LOYTEC electronics GmbH
MADE IN EC
W12/2013
LROC-100
810000F12A06
810000F12A09
000AB00FF002
006101810000F12A07
NID1
VID1
MAC1
SER#
Node ID of CEA-709 Port 1 FT
Node ID of LIOB-Connect
MAC address of CEA-852 Ethernet port
Serial number of the device
Date Code
Virtual (Node) ID of CEA-852 port (Ethernet)
Node ID of CEA-709 Port 2 LIOB-FT
810000F12A0A
810000F12A0B
NID2
NID3
http://www.loytec.com
[email protected]
1
7.5
25
35
35 mm x 7.5 mm DIN rail (EN 50022, BS 5584, DIN 46277-3)