07/2019/HD01-en/557046_2
6. Technical Data, specifications
Battery type 2 x 18650 Li-Ion 8.4 V
Charger Mascot 3743 LI 13 W
Max. charge current 1.5 A
Version HD 01_Set_01 HD 01_Set_02 HD 01_Set_03
Flow 7,5…75 l/min 15…300 l/min 40…600 l/min
Pressure 250 bar 400 bar 400 bar
Temperature 0…125 °C 0…125 °C 0…125 °C
Connection sensor block G1/2“ G 1 1/4“ G 1 1/2“
Fluid temperature -40…+120 °C
Operating temperature -10…+50 °C
Rel. humidity < 85 % without condensation
Storage temperature - 20…+60 °C
Measurement accuracy Pressure (P) ± 0.5 % FS / Flow (Q) ± 2.0 % of m.v. / Temperature (T) ± 2.0 % FS
7. Maintenance and storage
Only clean the device with a dry, soft cloth. Be careful when cleaning in order to avoid scratching. In case of heavy
soiling, the cleaning cloth can be moistened slightly with water. No moisture is allowed to ingress into the inside of the
product. Do not use any cleaning agents or chemicals as this may damage the material.
Store your product in a dry, dust-proof environment. Avoid places with high temperatures and humidity or places which
can become wet, even during maintenance and care..
Repairs must be carried out exclusively by the manufacturer.
Keep the original packaging to avoid damage during transportation.
8. Delivery content
1 Measurement device HD 01
1 Sensor block with: 1 Temperature sensor, 1 Flow sensor, 1 Pressure sensor
1 Charger
1 USB stick
Delivery in solid plastic case
Subject to technical alterations. 01/2020
