LTE GE864T-GPS Installation manual

01
GE864T-GPS
Hardware User Guide
Rev01 - 10.06.2013
Mustafa Kemal Mah. 2131 Sok. No: 32/2 06510 Söğütözü, Çankaya, ANKARA /TURKIYE
Tel: [phone] - Faks: [phone]

02
Contents
1Descripon ……………………………………………………………………………………………….… 3
2General Features ………………………………………………………………………………………… 4
3Power …………………………………………………………………………………………………………. 5
4Serial Port ………………………………………………………………………………………………..…. 5
5Digital I/O & ADC …………………..………………………………………………………………….… 6
6Antenna ………………………………………………………………………………………………….…… 6
7Debug GPS Port …….…………….……………………………………………………………………… 7
8Analog Audio ……………………………………………………………………………………………… 7
Mustafa Kemal Mah. 2131 Sok. No: 32/2 06510 Söğütözü, Çankaya, ANKARA /TURKIYE
Tel: [phone] - Faks: [phone]

03
1Descripon
GE864T-GPS GSM/GPRS/GPS terminal is the new generaon based on the Quad-Band
and RoHS comliant GE864 core engine incorporang addional and new features.
The GE864T-GPS featuring the embedded Python™ script interpreter provides the possibi-
lity for running customer programs inside the modem, thus making the terminal a comp-
lete self-contained applicaon plaorm for customer soluons. Programmable I/O port,
RS232 port and Serial Second GPS Port can be used for monitoring external signals, con-
necng sensors, and switching external devices. The GE864T-GPS oers jamming detec-
on funconality allowing the unit to sense aempts to disrupt the GSM communicaon
by interference with the GSM signal.
GE864T-GPS oers extended operang temperature, integrated TCP/IP stack,direct cont-
rol by standard serial RS-232 interface and with a broad supply voltage range (5-32 VDC -
Min1.2A), the GE864T-GPS terminal is a complete stand alone soluon for m2m applica-
ons.
GE864T-GPS Terminal is integrang full 48-channels A-GPS funconality. It combines the
high performance from Telit's proven GSM/GPRS core technology with the latest
SiRFstarIV™ high sensivity single-chip A-GPS receiver.
GE864T-GPS, supports Over-the-Air rmware update by means Premium FOTA Manage-
ment. By embedding RedBend’s vCurrent® agent, a proven and bale-tested technology
powering hundreds of millions of cellular handsets world-wide is able to updateits pro-
ducts by transming only a delta le, which represents the dierence between one
rmware version and another.
Mustafa Kemal Mah. 2131 Sok. No: 32/2 06510 Söğütözü, Çankaya, ANKARA /TURKIYE
Tel: [phone] - Faks: [phone]

04
2General Features
* Quad-band EGSM 850/ 900 / 1800 /1900 MHz,
* Embedded Python Version 1.5.2 ,
* Serial Debug GPS Port (Also 5.0V Fixed Voltage Output),
* RS232 ınterface (DB9-Female),
* Analog Audio Support (2.5mm jack, Mono-Mic & Mono-Ear),
* 2 Digital Inputs, 2 Digital Outputs and 2 ADC Connecons on GPIO socket,
* Dimensions: 85 x 70 x 33 mm,
* Weight: 140 grams,
* SMA female, 50 Ohm GSM RF connector,
* SMA female, 50 Ohm GPS RF connector,
* Power Socket (PWR, GND, RST),
* On board SIM card holder(Push-Push Type),
* Oponal WatchDog Timer with MCU(PIC12F675) controller.
Mustafa Kemal Mah. 2131 Sok. No: 32/2 06510 Söğütözü, Çankaya, ANKARA /TURKIYE
Tel: [phone] - Faks: [phone]

05
3Power
4Serial Port
Mustafa Kemal Mah. 2131 Sok. No: 32/2 06510 Söğütözü, Çankaya, ANKARA /TURKIYE
Tel: [phone] - Faks: [phone]
Front View
Pin Descriptions:
* GND: Ground Reference
* Input Power: 7-35V @ 1.2A min.
* Reset: Acve when Pulls Down to GND
Power Connector
The RS-232 port is available through D-TYPE 9
pin connector
The main characteriscs are:
* Baud rate from 300 to 115,200 bits/s
* Autobauding (300 to 38,400 bits/s)
* Short circuit (to Ground) protecon on all
outputs.
* Input voltage range : -12V to +12V
To connect to a PC a pin to pin, 9 pin cable
needed with D type connectors (male & fema-
le) on both sides.
Pin out (refers to DTE side):
Pin 1 = DCD Output
Pin 2 = RX Output
Pin 3 = TX Input
Pin 4 = DTR Input
Pin 5 = Ground
Pin 6 = DSR Output
Pin 7 = RTS Input
Pin 8 = CTS Output
Pin 9 = RI Output

06
5Digital I/O & ADC
6Antenna
Mustafa Kemal Mah. 2131 Sok. No: 32/2 06510 Söğütözü, Çankaya, ANKARA /TURKIYE
Tel: [phone] - Faks: [phone]
Front View
I/O Connector
The I/O port is available
through 2x6 pin connector
The Main Characteriscs are:
* 2 Digital Inputs (0-220VDC),
* 2 Digital Open-Collector
Outputs,
* 2 ADC Inputs (0-2V)
GSM ANTENNA REQUIREMENTS
Frequency range Standard Dual Band GSM/DCS frequency range or Standard Quad Band
GSM/DCS/PCS frequency range if used for all four bands
Bandwidth 70 MHz in GSM850, 80 MHz in GSM & 170 MHz in DCS & 140 MHz PCS
band
Gain Gain < 3dBi
Impedance 50 ohm
Input power > 2 W peak power
VSWR absolute max <= 10:1
VSWR recommended <= 2:1
Note:
The antenna(s) used for this transmier must be installed to provide a separaon
distance of at least 20 cm from all persons and must not be co-located or operang
in conjuncon with any other antenna or transmier.
Input1—>GPIO8 Output1—>GPIO6
Input2 —>GPIO9 Output2—>GPIO3

07
7Debug Port
8Analog Audio
Mustafa Kemal Mah. 2131 Sok. No: 32/2 06510 Söğütözü, Çankaya, ANKARA /TURKIYE
Tel: [phone] - Faks: [phone]
Front View
NMEA GPS Serial Port Connector
The Debug port is available
through 1x4 pin connector
The Main Characteriscs are:
* 5V Fixed Output,
* 5V Level Second Serial Port
(GPS_TX_AUX & GPS_RX_AUX)
2.5mm Audio Connector
The Main Characteriscs are:
* Headset Connecon including MIC
and EAR,
* Compable with 2.5mm 3 channel
receptacle headset jack

08
Document Change Log
Mustafa Kemal Mah. 2131 Sok. No: 32/2 06510 Söğütözü, Çankaya, ANKARA /TURKIYE
Tel: [phone] - Faks: [phone]
Revision Date Changes
Rev02 07.07.2014 GPS Serial Debug NMEA
port added
Rev03 02.09.2015 GPIO Description added