Ltech Artnet-SPI-4 User manual

Model: Artnet-SPI-4
Artnet-SPI-8
ArtNet-SPI Control System
Manual

Ethernet Control System based on the ArtNet protocol.
Convert the ArtNet network data package into SPI data.
Adopting high-speed ARM processor, stable and reliable.
With RJ45 network and DMX512 interface, support DMX management.
With OLED screen and 4 keys, very easy for setting operation.
Support firmware update function.
Support recording function, support multiple device offline sync playback function.
Support offline timing and loop playback.
Supports serial/parallel connection of network cables.
Supports static/dynamic IP settings.
Compatible with the light software based on ArtNet protocol.
Used in LED dot matrix and DMX512 stage lighting control.
Offline synchronized playback does not need to specify the master and slave.
Suitable for TV station recorded scene, stage performances, entertainment, building
lighting and so on.
1
www.ltech-led.com
Product Introduction

Artnet-SPI-4 / Artnet-SPI-8
www.ltech-led.com
2
兼容IC：
WS2811/WS2812/SK6812/TM1803/TLS3001/KL590/KL592D/WS2821/TM1829LS
MBI6120/GW6205/GS8206(BGR)/SM16703/UCS2904/UCS8904B/SK6812(RGBW)
TM1809/TM1804/TM1812/UCS1903/UCS1909/UCS1912/UCS2903/UCS2912
TechnicalSpecs
Artnet-SPI-4: 680 pixels, 4 universe
Artnet-SPI-8: 1360 pixels, 8 universe
SPI
8G
5~24Vdc
L170×W90×H25mm
L192×W132×H50mm
610g
-30℃~55℃
Working temperature:
Ethernet (ArtNet)
Output signal:
SD card capability:
Input voltage :
Dimension:
Package size:
Weight (G.W):
Input signal:
RJ45
RJ45
Isolation ethernet port:
Screen:
Isolation power input:
DMX connection:
Network connection:
Control:
Total isolation
OLED
Total isolation
Control system 1pcs
SD card (8G) 1pcs Manual 1pcs
Package Contents

3
170
160
8
4
www.ltech-led.com
26
99
90
64
Product Size
Unit: mm
Main Component Description
Screen
Function keys
Ethernet
input/output DMX512
input
SD card slot
Green terminal
lamp connection
5-24Vdc power input
(Power the device)
5-24Vdc
power input
(Power the device and lamps)

www.ltech-led.com
4
……
……
……
……
……
……
1. Connection in series
online
offline
2. Connection in parallel
Ethernet
Switch
Ethernet
Switch
Wiring Diagram
Artnet-SPI
control system
Artnet-SPI
control system
Artnet-SPI
control system
Artnet-SPI
control system
Parallel connection is recommended for large number of devices.
*Offline synchronized playback no need to specify the master and slave.
*Offline synchronized playback no need to specify the master and slave.
*
online
offline

www.ltech-led.com
5
Connect ArtNet control system to computer
4.4 Add the IP address 2.X.X.X or
10.X.X.X (X could be arbitrary
value).
4.5 Interface of adding successful,
click “OK” and exit.
4.1 Open the Network, click
“Properties” button of the
TCP/IPv4 protocol.
4.2 Click “Advanced”. 4.3 Click “Add”.
2. Use the equipped adapter to power ArtNet control system
3. Connect ArtNet control system to computer via the cable.
1. Install the Madrix 3 software in the computer, the icon on the desktop :
MADRIX 3
4. IP Setting: This control system is compatible with random network segment. According to
the ArtNet protocol, 2.X.X.X or 10.X.X.X can be added in the computer ( X means
arbitrary value), methods as below:
This product is compatible with all the ArtNet software in the market, here take MADRIX as an
example:

www.ltech-led.com
6
5. Open Madrix 3 software, choose“preferences”>" device manager" from menu.
6. In "device manager" dialog, choose "ArtNet" tab, tick “enable” and click search .
Artnet-SPI-4 / Artnet-SPI-8 will be searched.
7. Click the tab of "DMX devices", set port status to “ON” if connected successfully. Now, you
can use computer to control lamps via Artnet-SPI-4 / Artnet-SPI-8.
*MADRIX is registered trademarks of Inoage GMbH Co., Inc. in Germany.

www.ltech-led.com
7
LCD Screen Interface Diagram
Key function
Main display interface
Network SD card Free space/ Total space
Press “UP“ key or ”DOWN“ key” to switch item.
Press MENU” key to enter submenu.
Main menu
12.32/14.83G
Setting
Clock
Network
List
Tool
Timer
ArtNet
Record
Press ”MENU” key to switch item.
Press “UP“ key or ”DOWN“ key to adjust parameter.
Clock Clock
Year
2018
Hour
14
Mon
03
Min
09
Day
05
Sec
33
Press ”MENU” key to enter main menu.
Press “BACK“ to playback/pause.
Network SD card
Free space /
Total space
Week date/month/year time
M
S
Mt
St
Playback
or pause
M/S/Mt/St
Chip type--pixel--RGB order
IP address
12.32/14.83G M
(TM1809--340--RGB)
192.168.001.066
M 05/03/2018 13:25:18
Playing sequently from
master controller.
Playing sequently from
slave controller.
Timing palyback from
master controller.
Timing playback from
slave controller.
Menu Back
Parameter/Item switching

www.ltech-led.com
8
Tool
Timer
Screen:
Contrast:
Lock:
01.
02.
03.
04.
05.
Never
60%
OFF
2019/06/11~
Unknown~
Unknown~
Unknown~
Unknown~
口
口
口
口
口
Setting
Tool
Screensaver
Screen contrast
Screen lock
Press ”MENU” key to switch item.
Press “UP“ key or ”DOWN“ key to adjust parameter.
Timer
Press ”MENU” key to switch item, Press ”DOWN“ key to enter submenu.
Press “UP“ key start or stop the timer, tick in the box means start.
(only effective for timer which has been set).
Dateweek Dateweek
Sta:2018/03/05 14:43
End:2018/03/05 14:43
01.201707151556
02.201707151656
03.201712201556
Mo Tu We Th Fr Sa Su
01.201707151556
02.201707151656
03.201712201556
口
口
口
口
口
口
口口口口口口口
Data submenu Week submenu
File
name File
name
Press ”MENU” key to switch item.
Press “UP“ key or ”DOWN“ key to select file, tick in the box means select it.
Setting
Chip:
Order:
Bright:
DMX:
TM1809
GRB
254
001
Press ”MENU” key to switch item.
Press “UP“ key or ”DOWN“ key to adjust parameter.
Chip type
RGB order
Brightness of load lamp
Address of the DMX

www.ltech-led.com
9
Network
List
ArtNet
Record
DHCP: ON
Universe:004
File Name:
IP:
MK:
GW:
01.201707151556
02.201707151556
03.201707151556
04.201707151556
05.201707151556
No:
File Time:
00:00:00
192.168.001.066
255.255.255.000
192.168.001.001
Uni/Total:08
Uni/Chan:02
201903051458
口
口
口
口
口
Network
DHCP ON:
DHCP OFF:
dynamic IP
static IP
Dynamic IP‘s parameters are automatically updated and cannot be
changed manually.
Press ”MENU” key to switch item.
Press “UP“ key or ”DOWN“ key to adjust parameter.
*
List
File name
Press ”MENU” key to switch item.
Press “UP“ key or ”DOWN“ key to tick in the box (means select this file).
Record
( pause record)
Press”UP“ key or ”DOWN“ key to switch .
ArtNet
ArtNet space
parameters.
Press”UP“ key or ”DOWN“ key to adjust parameters.

MobileAppInterfacefortheRDMProgrammer
WorkwiththeRDMProgrammer
www.ltech-led.com
10
5-24Vdc
Input voltage WiFi-RDM01
DMXsignal
TheArtNet-SPIControlSystemcanworkwithaDMXaddressprogrammerthatfollowsthe
standardRDMprotocol.
ItisrecommendedtouseLTECHRDMProgrammer Model:WiFi-RDM01),whichallowsremote (
browsing,parametersettingandDMXaddresssetting.
Support portable power supplies
DownloadtheAppwithyourmobilephoneandconnecttheRDMProgrammersuccessfully,then
youareallowedtosetparametersthroughtheAPP.PleaserefertotheWiFi-RDM01manualfor
moredetails.
a. Atthehomepage,click"Add"ofthedeviceyouaregoingtooperatetoedittheaddress,asshown
belowintheinterface.
b. Click“ID”togetmoredetailsfordevices.
c. Click”No”toissueanrecognizingcommand.
d. Click ” ” toview/modifyparameters,includingmodifyingfrequency,mode,curve,querying
outputpowerandmodifyingcurrent.
e. Click“ ” intheupperleftcornertoaccessthesettingswhichallowsyoutotest,editDMX
addresses,setWiFifordevicesandupgradefirmware.


11
www.ltech-led.com
Home page
Feedback
Upgrade
9:41 AM 100%
More
Te st
DMX Address
Setting WiFi
About
9:41 AM 100%
DMX address: Unicast
Choose the sorted models firstly，then modify Srl.NO and click OK
18
#
#1 #2 # 3 #4
#21 #22 #23 #24
#25 #26 #27 #28
#9 #10 #11 #12
#5 #6 #7 #8
#13 #14 #15 #16
#17 #18 #19 #20
1
50
100
150
200
250
300
350
400
Setting
DMX address setting
Test
9:41 AM 100%
Devices
Srl.NO.Add Channel ID
1
24
2
3
4
512
5
32
3
1
5
5
6205BB9980FA
6205BB5248FA
6205BB9810FA
6205BB5368FA
Software Version：V2.00.01.00
Device Model: ArtNet-SPI-4
Producer：LTECH
a
c
e
d
d
Program
1
#
52
2
#
52
3
#
52
4
#
52
9:41 AM 100%
Test
5
#
OF F
6
#
OF F
7
#
OF F
8
#
OF F
9
#
OF F
10
#
OF F
11
#
OF F
12
#
OF F
13
#
OF F
14
#
OF F
15
#
OF F
16
#
OF F
17
#
OF F
18
#
OF F
19
#
OF F
20
#
OF F
21
#
OF F
22
#
OF F
23
#
OF F
24
#
OF F
25
#
OF F
26
#
OF F
27
#
OF F
28
#
OF F
29
#
OF F
30
#
OF F
31
#
OF F
32
#
OF F
33
#
OF F
34
#
OF F
35
#
OF F
36
#
OF F
1
50
100
150
200
250
300
350
400

www.ltech-led.com
12
Firmware Update
Update Time: 2020.10.10_A1
For firmware update, please contact us for update software and documents.
Frame size: 256
Click
“Firmware update”
Click “Browse”, and
select update file
Enter IP address of
main display interface
Remote
port: 6454
Local
port: 6454
256
6454 6454
1
2 3 4
5
6
LTECH 123456
*
Please connect ArtNet control system to computer, and copy update file to computer.
Method 1. Firmware update with software.
Method 2. Firmware update with explorer.
Open explorer, enter "http://192.168.1.14" in the address bar, “login” interface appeared, enter
user name"LTECH", password "123456", then click "login" button.
Open software in your computer, enter follow interface and update firmware.
Enter the following interface, click "browse" button to select the update file, then click "upload"
button to update, if "update done!" appeared means update successful.

www.ltech-led.com