lubemate L-DRP1225 User manual

1
INSTRUCTION MANUAL
l-drp1225_inst_issue1
Model L-DRP1225
GARDEN/DOMESTIC WATER RETRACTABLE HOSE REEL

2
INSTRUCTION MANUAL
lubemate by macnaught / instruction manual
CAUTION
GENERAL SAFETY
GARDEN/DOMESTIC WATER RETRACTABLE HOSE REEL
DESCRIPTION
Thank you for purchasing a Lubemate hose reel. This reel is designed for use in private home and hobby
garden or car washing etc,
Each reel is a quality UV Stabilised reel, supplied complete with a delivery hose, feeder hose and
mounting bracket.
1. The hose reel is UV stabilised.
2. The reel is easy to use positive latch and a built in hose layering mechanism to prevent hose bunching.
3. Durable construction, made from high quality impact resistant polypropylene, light in weight and more
compact.
4. A powerful spring winds the hose back into the drum. 
FEATURES AND BENIFITS
* To prevent injury or damage do not let go of the hose during rewinding.
* Hold the hose stop ball when retracting hose.
* Do not disassemble hose reel.
* Ensure the reel or hose is not in contact with any sharp objects or exposed to high temperatures.
* Do not drop this reel or damage will occur.
* Do Not use this product with any chemicals or liquid other than water.
* Turn off water supply after use or at the end of the day.
Please read these operating instructions carefully and note the information given. Use these operating
instructions to familiarize yourself with the product, the proper use and the safety
instructions.
Installation:
1. Take out the unit and accessories from the box，
2.Choose a suitable place near water source.
3.Take the mounting bracket as a template, mark the position for screws and drill four holes on the wall
( Fig.2)
4. Fix the bracket by four self-taping screws accordingly, (Fig.1)
Fig.1 Fig.2
1Hose reel 1
2Mounting bracket 1
3Self-tapping bolts 4

3
INSTRUCTION MANUAL
macnaught.com
GARDEN/DOMESTIC WATER RETRACTABLE HOSE REEL
5.Connect the reel to the mounting bracket.
Operation
1.Connect feeder hose to the water source and turn on tap
2. Pull out hose to desired length and stop.
Retract hose
1. Always hold hose when rectracting back into reel
2. Turn off the water supply.
Storage
Cleaning
This Reel is maintenance-free and must not be cleaned internally with water.
Maintenance
When not in use, turn off supply, and release the line pressure
The reel must not be used to transmit any chemical and substance
When not in use for an extended period of time it is recommended to be stored in a cool dry place.
Note:
1. The reel should be installed horizontally to a wall or post.
2. It is recommended to mount the reel approximately 1 meter above the ground.
Fig.3
ItemDescri
p
tion Material Nooff
29 S
y
nchronousbelt PU 1
28 Ri
g
htCover PP 1
27 Leadhose PVC 1
26 SmallS
p
rin
g
S
p
rin
g
Steel 1
25 Inlet POM 1
24 Ri
g
htCasin
g
PP 1
23 ToothWheel PA 1
22 Slowreturnmechanism PA6+GF30 1
21 O‐Rin
g
NBR 2
20 Outlet POM 1
19 LockS
y
stem PA 1
18 Fixin
g
Piece PP 1
17 Sleeve ABS 1
16 InnerHexa
g
onScrew Q235 1
15 Drum PP+GF30 1
14 Mountin
g
Bracket 30 1
13 S
p
rin
g
S
p
rin
g
Steel 1
12 Mountin
g
Pin PA66+GF30 1
11 LockPlate PP+GF30 1
10 Hose
g
uides
y
stem PA+POM 1
9HoseSto
p
PP 1
8Pre‐loadin
g
Ca
p
PA6+GF30 1
7Out
p
utHose PVC 1
6Handle PP 1
5Pre‐loadin
g
Wheel PA66+GF30 1
4 GuidePole StainlessSteel 1
3LockPiece POM 1
2LeftCasin
g
PP 1
1LeftCover PP 1
EXPLODED DIAGRAM
Note: no spare parts available

4
INSTRUCTION MANUAL
lubemate by macnaught / instruction manual
GARDEN/DOMESTIC WATER RETRACTABLE HOSE REEL
Fig.4
Forwarrantytermsandcondionsreferto
www.macnaught.com.au
SPECIFICATIONS - L-DRP1225
Maximum Pressure 120psi/8bar
Maximum Temperature + 55 deg C
Hose type PVC
Hose Size and Length 1/2" (12.5mm) x 25m
Inlet / Outlet Garden quick connect
Dimensions
44 x 22.4 x 41.5cm
Weight
8.6kgs
TROUBLESHOOTING
FAULT DESCRIPTIONSOLUTION
Thehosedoesnot
retract
Hosehasbeenpulledouttoo
farandlocked
Accessthedrumthroughthewindowandcarefullyrotate
thedrumhalfaturninthedirectionofthehosebeing
pulledouttoreleaselatch.
Notenoughspringtension
Add 1-2 turns extra turns:
1. Remove the small cover,
2. Use spanner to clamp the groove of preload wheel,
3. Unscrew four bolts on the wheel, then rotate it for 1-2
turns in counterclockwise, then fasten the bolts, and
replace the cover.Fig.5