Lucent Technologies CellPipe 40H-CES User manual

CellPipe®40H-CES
The CellPipe®40H-CES helps you minimize capital expenditures while
you offer a full range of voice and broadband services to small and
medium-sized businesses. This CPE gives you seamless support for
legacy equipment, like PBX systems and existing routers. It also takes
advantage of Symmetrical High-bit Rate Digital Subscriber Line (SHDSL)
technology to deliver transport speeds up to 2.304 Mbps-allowing you
to meet the demand for high-value data and multimedia services using
existing copper wiring.
Applications
• Low-cost POTS, including support
for legacy PBX equipment
• A full range of high-quality
broadband services, including data,
video and multimedia applications
• Economical DS1/E1 leased line
replacement
Features
•SHDSL network port – Connects the
CellPipe®40H-CES to your
DSLAM, using an SHDSL line with
symmetric data rates from 192
Kbps to 2.304 Mbps
•Software configurable T1 or E1
interface – Provides Circuit
Emulation Service (CES)
functionality—enabling seamless
support for legacy equipment
•Constant Bit Rate (CBR) port –
Supports your customer’s existing
TDM voice traffic, including
PBX calls
•Multiprotocol serial interface for
router traffic – Handles a wide
spectrum of data traffic, enabling
cost-effective support for existing
routers
•Static and dynamic IP routing
capabilities – Support both manual
and dynamic routing to allow easy
integration of any equipment
•DHCP server and client support –
Streamlines IP network
administration
•NAT/NAPT capabilities – Provide
secure, flexible IP configuration
•10/100BaseT Ethernet switching port
– Establishes broadband
connectivity to your customer’s
high-speed LAN
•IEEE 802.1D transparent, self-
learning bridge – Enables seamless
LAN interconnection with
enhanced traffic flow between
LAN segments
•Graphical user interface – Speeds
and simplifies network
configuration and allows easy
remote access, monitoring and
management
Benefits
•Expanded revenue opportunity –
You can extend your high-value
broadband services to small and
medium-sized businesses cost-
effectively
•Reduced capital expenditures –
Take advantage of this powerful,
small-scale solution to serve a
diverse range of customers—with
minimal outlay
•An economical alternative to DS1/E1
– Cut costs by using the existing
copper infrastructure to transport
high-speed data, instead of
installing fiber
•Centralized control of subscriber
networks – It’s easy to maintain
efficient operations with remote
configuration management and
monitoring
•Competitive edge – You can offer
the cost-effective voice and data
service bundles that small to
medium-sized businesses are
looking for—with easy service
upgrades

To learn more about our comprehensive
portfolio, please contact your Lucent
Technologies Sales Representative or
Lucent Business Partner, or visit our
web site at www.lucent.com.
This document is provided for planning
purposes only, and does not create,
modify or supplement any warranties
which may be made by Lucent
Technologies relating to the products
and/or services described herein. The
publication of information contained in
this document does not imply freedom
from patent or other protective rights of
Lucent Technologies or third parties.
CellPipe is a registered trademark of
Lucent Technologies Inc.
Copyright © 2003
Lucent Technologies Inc.
All rights reserved
Cell v1.0203
Specifications
11.Mechanical
Mounting: Stand-alone
Dimensions: 11.75 in. (29.845 cm) w,
1.86 in. (4.724 cm) h, 8.75 in.
(22.225 cm) d
Weight: 2.13 lb (0.97 kg)
12.Environmental
Operating Temperature: 0 to 50 ºC
(32 to 122 ºF)
Storage Temperature: -20 to 65 ºC
(-4 to 149 ºF)
Humidity: 95% maximum,
non-condensing
1.Hardware Specifications
SHDSL IAD
CBR port, user selectable E1/T1
Serial data port, user selectable V.35,
X.21, RS-232, RS-449, EIA-530
10/100 Ethernet
Management: EOC (for G.shdsl related
parameters), Web-based interface,
local supervisory port
2.Serial Interface
DTE/DCE Port: Selectable V.35, V.36,
RS-232, RS-449, EIA-530
Data Rate: Synchronous, nx64 Kbps
(where n=1-36)
Connection: DB-25 Female
Protocol: PPP, HDLC
3.LAN Interface
Ethernet Port:
10/100 Base-T auto-sensing
Protocol: TCP/IP, RIP1, RIP2, OSPF
IP Addressing: DHCP (server and client)
Security: NAT, NAPT
Bridge: IEEE 802.1D transparent,
self-learning
4.Network Interface
Line Rate: 2.304 Mbps
Line Framing:
ATM transport (G.991.2E9)
Line Coding:
Trellis Coded Pulse Amplitude
Modulation
Network Protocol: ATM
Adaptation Layer: AAL1 and AAL5
Connection: RJ-48C
Number of PVCs: Up to 16
(1 PVC for CBR port)
5.CBR Port
T1 Mode
Line Rate: 1.544 Mbps
Line Framing: D4 or ESF
Line Coding: AMI or B8ZS
Input Signal: DSX-1 to –6dB
Connection: RJ-48
E1 Mode
Line Rate: 2.048 Mbps
Line Framing: CCS, CAS or Unframed
Line Coding: AMI or HDB3
Input Signal: E1, +1 to –27dB (ALBO)
Connection: RJ-48
Timing: Network, AAL1 adaptive
ATM Adaptation Layer: AAL1, Circuit
Emulation Service (af-vtoa-0078.000)
Mode: Short haul, long haul
6.Management Interface
Embedded Operations Channel (EOC)
for SHDSL related parameters,
embedded Web Server interface, VT100,
Telnet, SNMP V2, local supervisory port
7.Industry Listings
FCC: Part 15, Class A, Subpart B
Safety: UL 60950 3rd Class
Canadian Safety: CSA C22.2 No. 950
Industry Canada: CS-03
International Safety: EN 60950
International: EN 55022 Class A;
EN 50081-2
European: CE Mark
8.Diagnostics
Performance: 15-min, 24-hr and 30-day
monitoring (sampled every sec)
Network Loop: SHDSL network loopback
Span Performance Statistics:
Attenuation, SNR
Margin, ES, SES, CRC, LOSWS, UAS
9.Statistics
Tx/Rx cells (AAL1 and AAL5)
Tx/Rx frames (AAL5)
Tx/Rx bytes (AAL1 and AAL5)
Error frames (AAL1 and AAL5)
Frames with CLP bit set (AAL5)
Frames with CI bit set (AAL5)
Frames aborted (AAL5)
Frames with length violation (AAL5)
Frames with CRC error (AAL5)
Frames with HCS error (AAL5)
10.Power Requirement
Voltage Input:
100 to 240 VAC auto-ranging
Frequency: 50 to 60 Hz