Lucent Technologies Stinger STGR-LIM-AP-48 User manual

Stinger®DSL Access Concentrator
48-port ADSL/ADSL2+ Ready LIM
This Stinger®line interface module (LIM) supports a mix of DSL technologies that you can
adjust port by port, giving you a fast, cost-effective way to meet your customer’s changing
needs. Your options include ADSL and g.lite, along with ADSL2 and ADSL2+, which is
available with a simple software upgrade. ADSL technology provides transport speeds up to
8 Mbps downstream and 1 Mbps upstream, while ADSL2+ doubles the bandwidth used for
downstream transmission,—enabling more high-value services. You can also use lower-rate
ADSL2+ to extend your DSL service range and reach more subscribers.
Applications
• Residential broadband services,
including Internet access,
streaming multimedia,
telecommuting and home office
• Business-class data services,
including intranets and fast
Internet access
• Extended service reach or
enhanced high-speed offerings,
such as premium data services,
broadcast TV and video-voice-data
bundles (using ADSL2+)
Features
•DSL options—Lets you choose
ADSL or g.lite technology—or take
advantage of an optional software
upgrade that supports ADSL2 and
ADSL2+
•ADSL connections—Delivers data
transport rates up to 8 Mbps
downstream and 1 Mbps upstream
•ADSL Annex A, B and C versions—
Meets regional requirements:
Annex A—allows ADSL and POTS
to operate on the same copper pair
Annex B—enables ADSL and ISDN
to operate on the same copper pair
Annex C—allows ADSL to coexist
with Japanese TCM-ISDN in the
same binder group
•ADSL2+ software upgrade—Offers
downstream data rates up to twice
as fast as ADSL—or allows you to
further extend your DSL service
reach, at lower speeds
•48 ports per LIM—Supports up to
672 ADSL in a single Stinger
chassis—minimizing the cost of
service delivery
•Flexible mix of technologies on each
card—Allows you to choose ADSL,
g.lite, ADSL2 or ADSL2+ on each
port, with quick adjustment to
satisfy changing demands
•POTS support—Enables traditional
voice services to operate on the
same copper line used for ADSL or
ADSL2+
•QoS capabilities—Maintains the
reliable performance you need to
keep customers satisfied
•Optional per-port redundancy—
Provides high availability and
robust performance
•Compatibility—Allows this LIM to
operate alongside other Stinger®
LIMs—supporting different DSL
technologies on the same chassis
Benefits
•Increased revenue potential—Offer
the high-value data and video
services that subscribers demand,
while supporting POTS over the
same copper pair
•Reduced costs—Minimize expenses
using a high-density LIM that
enables a mix of technologies on
one card—eliminating the need for
a forklift upgrade
•Enhanced transport speeds—Take
advantage of the ADSL2+ software
upgrade to deliver downstream data
rate up to twice as fast as ADSL
•Expanded DSL range—Reach more
subscribers cost effectively, with
lower-speed ADSL2+
•Easier provisioning—Respond
quickly to customers’ changing
needs, through simple adjustments
to the technology on any port
•Future-proofing—Benefit from the
advantages of ADSL2+, with an
easy software upgrade that supports
more advanced capabilities

To learn more, contact your local Lucent
Technologies Representative, Authorized
Reseller, or Sales Agent.
Or, visit our Web site at www.lucent.com
Specifications subject to change without
notice.
This document is for planning purposes
only, and is not intended to create,
modify or supplement any Lucent
Technologies specifications or warranties
relating to these products or services.
Information and/or technical
specifications supplied within this
document do not waive (directly or
indirectly) any rights or licenses –
including but not limited to patents or
other protective rights – of Lucent
Technologies or others.
Stinger is a registered trademark of
Lucent Technologies.
Copyright © 2004
Lucent Technologies, Inc.
Printed in the U.S.A.
Stgr v1.0404
Technical Specifications
8.Interface Standard s
ANSI T1.413 Issue 2 (full-rate)
ITU G.992.1 (G.dmt)
– Annex A (line sharing with POTS)
– Annex B (line sharing with ISDN)
– Annex C (coexist with Japanese ISDN)
ITU G.992.2 (G.lite)
– Annex A (line sharing with POTS)
– Annex C (coexist with Japanese ISDN)
ITU G.994.1 (G.hs)
ITU G.997.1 (physical layer management)
ITU-T G.992.3 ADSL2 specifications
ITU-T G.992.4 ADSL2-Lite specifications
ITU-T G.992.5 ADSL2+ specifications
9.Performance
G.dmt, Annex A: Maximum 8.064 Mbps
downstream, 1.024 Mbps upstream
G.dmt, Annex B: Maximum 8.064 Mbps
downstream, 1.024 Mbps upstream
Standard G.lite, Annex A: Maximum
1.536 Mbps downstream, 512 Kbps
upstream
Turbo G. lite, Annex A: Maximum 3.424
Mbps downstream, 832 Kbps upstream
ADSL2/ADSL2+: supports standard
downstream and upstream rates
10.Range
Maximum 28,000 ft (full rate mode)
Maximum 26,200 ft (G.lite mode)
ADSL2/ADSL2+: supports distances as
per the standards
11.Model Numbers
STGR-LIM-AP-48: 48-port
ADSL/ADSL2/ADSL2+ for
Stinger FS+/FS and LS
STGRRT-LIM-AP-48: 48-port
ADSL/ADSL2/ADSL2+ for Stinger RT
STGRCR-LIM-AP-48: 48-port
ADSL/ADSL2/ADSL2+ for Stinger CR
STGR-SO-ADSL2P: software option to
enable ADSL2/ADSL2+ mode
STGRSACR-SO-ADSL2P: software
option to enable ADSL2/ADSL2+
mode for the Stinger CR
1.Dimensions
Height: 15 in (38.1 cm)
Width: 1.06 in (2.69 cm)
Depth: 9 in (22.8 cm)
2.Weight
4.0 lb (1.8 Kg)
3.Power Requirements
106 W maximum
4.Operating Requirements
Temperature:
FS+/FS/LS version:
32° - 131° F (0° - 55° C)
RT/CR version:
-40° - 149° F (-40° - 65° C)
Relative humidity:
10% - 90 % (non-condensing)
Operating altitude:
Up to 13,123 ft (4,000 m)
5.Electromagnetic Compliance
FCC Part 15 Class A
EN55022 Class A
AS/NZS3548 Class A
VCCI Class 1
CISPR Class A
6.Certification
Telcordia GR-63-CORE
(NEBS Level 1-3)
Telcordia-GR-1089-CORE
EN / IEC 60950
7.Status Indicators
ACTIVE (Green): LIM is fully operational
STBY (Orange):
LIM is designated redundant spare
B Y PASS (Orange):
LIM currently bypassed
FA U LT (Orange): Fatal error detected
Per Port (Green): Port is active, data
being passed