Lucent Technologies Stinger Trunk Module OC-12/STM-4 User manual

OC-12/STM-4 Trunk Modules for the
Stinger®DSL Access Concentrator
This Stinger®trunk module offers higher transport speeds, up to 622 Mbps, along
with the flexibility to meet a wide range of operating requirements efficiently and cost
effectively. It gives you a choice of two high-speed fiber interfaces to the ATM core network,
subtending capabilities for scalability and dual-port modules enabling redundancy. With
the OC-12/STM-4 module installed, you can improve performance for sophisticated data
applications. And compatibility with other Stinger®trunk modules allows you to support
diverse services from a single chassis.
Applications
• High-capacity DSL aggregation
• APS support for increased
reliability
• Support for lucrative, bandwidth-
intensive services, such as video,
multimedia and corporate data
services
• Reliable bandwidth for
premium services
Features
•Transport speeds up to 622 Mbps—
Improves performance for high-
value services, helping to keep
customers satisfied.
•Optical interface options—Provides
a choice of OC-12 or STM-4
technology to suit your
requirements, with single-mode
long-reach or intermediate-reach.
•Intermediate-reach mode—Supports
Stinger®FS and FS+ chassis located
up to 15 kilometers from the ATM
core network.
•Long-reach mode—Extends support
up to 40 kilometers from the ATM
core network.
•Subtending capabilities—Allows
multiple Stinger®FS and FS+ units
to be cascaded for more efficient,
cost-effective traffic aggregation.
•Dual-port modules— The OC12-
ATM trunk module provides line
redundancy by implementing
linear 1+1 automatic protection
switching (APS).
•Compatibility—Enables the OC-2/
STM-4 trunk module to operate
alongside other Stinger®trunk
modules in the same chassis—to
support diverse operating
requirements.
Benefits
•Enhanced revenue opportunities—
Take advantage of increased
transport speeds to offer a full
array of high-value services,
including videoconferencing and
broadcast TV.
•Flexibility—With this module’s
options for technology, reach,
subtending and redundancy, it’s
easy to satisfy your unique
operating requirements.
•Increased efficiency—Flexible
configuration capabilities allow
you to streamline operations and
cut costs.
•Scalability—Cascade multiple units
for cost-effective use of network
resources.
•Improved performance—Keep
customers satisfied with higher
speeds and reliability.

To learn more, contact your Lucent
Technologies representative, authorized
reseller, or sales agent. Or, visit our
Web site. www.lucent.com
Specifications subject to change
without notice.
This document is for planning purposes
only, and is not intended to create,
modify or supplement any Lucent
Technologies specifications or warranties
relating to these products or services.
Information and/or technical
specifications supplied within this
document do not waive (directly or
indirectly) any rights or licenses –
including but not limited to patents or
other protective rights – of Lucent
Technologies or others.
Stinger is a registered trademark of
Lucent Technologies Inc.
NEBS is a trademark, and Telcordia
is a registered trademark of Telcordia
Technologies.
©2004 Lucent Technologies, Inc.
Printed in the U.S.A.
OC12 v1.0304
Technical Specifications
1.Availability
Only available for the Stinger®FS and
FS+ chassis equipped with version 2 or
later control modules
2.Dimensions
Height: 15 inches (38.1 cm)
Width: 1.06 inches (2.69 cm)
Depth: 5 inches (12.7 cm)
3.Weight
1.5 lbs. (0.68 kg)
4.Operating Requirements
Temperatures:
FS+/FS version: 32°–131° F (0° to 55° C)
Relative humidity:
0–90% (noncondensing)
Operating altitude:
Up to 13,123 ft. (4,000 m)
5.Electromagnetic Compliance
Agency approvals
Electromagnetic Emissions Certifications:
FCC Part 15 Class A, and CISPR Class A
EN55022 Class A
AS/NZS3548 Class A
6.Interface standards
OC-12c:
ANSI T1.105
ANSI T1.106
STM-4:
ITU G.957 (optical)
ITU G.709 (optical)
7.Physical connectors
Industry-standard LC connectors
8.Physical interfaces
Two UNI 3.0/3.1 cell-bearing OC-12c/
STM-4 622-Mbps ports (optical)
9.Maximum modules
Fully supports one per chassis
10.Other OC-12 standards
ATM Forum UNI 3.0/3.1
ANSI T1M1.3/92-005R1
Telcordia®TR-NWT-001112
Telcordia®GR-253-CORE
RFC 1595
11.Other STM standards
ATM Forum UNI 3.0/3.1
ANSI T1M1.3/92-005R1
Telcordia®GR-253-CORE
RFC 1595
12.Certifications
Telcordia GR-63-CORE
(NEBS™ Level 1-3)
Telcordia GR-1089-CORE
EN/IEC 60950
13.Power Requirements
17 W
14.Optical Specifications
Intermediate-Reach:
Up to 15 kilometers (9.3 miles).
TX power: -15 decibels referred to
1 milliwatt to -8dBm
RX Sensitivity: -8dBm to -28dBm
Nominal wavelength: 1310 nanometers
Long-Reach:
Up to 40 kilometers (24.9 miles)
TX power: -2 decibels referred to
1 milliwatt to -3dBm
RX Sensitivity: -8dBm, -28dBm
Nominal wavelength: 1310 nanometers
15.Model Numbers
STGR-TM-OC12 Two-port trunk
module with OC12/STM-4 interface
(single mode, intermediate reach) for
operation at 622Mbps per port over
single-mode fiber, at distances up to
15km (9.3 miles)
STGR-TM-OC12-L Two-port trunk
module with OC12/STM-4 interface
(single mode, long reach) for operation
at 622Mbps per port over single-mode
fiber, at distances up to 40km
(24.9 miles)