Lumens VS-KB30 Quick start guide

FW003 - VS-KB30 FW Update Manual 1
VS-KB30 Firmware(FW) Upgrade
Please contact Lumens FAE Department through e-mail to get the proper FW and AP before
upgrading.
1 Device and Tool Preparation
1.1 Please prepare following devices and tools before FW upgrade.
VS-KB30
Power adapter and power cord
PC or Laptop
USB Disk (Format FAT 32)
or
2 Two kinds of firmware type for VS-KB30
2.1 Master firmware
2.2 Webpage firmware

FW003 - VS-KB30 FW Update Manual 2
3 Master firmware update
3.1 Save master firmware to USB flash disk
3.1.1 Save the “.bin” firmware file in the root directory (not inside of a folder)
3.2 Place the flash drive into the USB port on the back panel of the VS-KB30
3.3 Hold down the L/R Direction knob and click the power button into the “On” position.
3.4 The keyboard will display a confirmation that the upgrade is starting. (around 10 secs)
3.5 When keyboard shows “FIRMWARE UPGRADE SUCCEED”, power off unit and reboot.
4 Webpage firmware update
4.1 Set your PC or laptop and VS-KB30 in the same network.
4.2 Type IP address of VS-KB30 on browser to access the login page.
4.2.1 User：admin
4.2.2 Password：default is empty

FW003 - VS-KB30 FW Update Manual 3
4.3 Follow the instruction to upload webpage firmware from PC or laptop.
4.4 Press start to upgrade the webpage firmware.
4.5 When keyboard shows “FIRMWARE UPGRADE SUCCEED”, power off unit and reboot.
5 Check the firmware version.
5.1 Press “SETUP”, [KEYBOARD SETTING]=>[MODEL INFO] to confirm the firmware
version.