Lumens VS-KB30 User manual

 
1. I/O Introduction
5100331-50
DEC, 2018
www.MyLumens.com
5.How to Connect IP
P/T SPEED ZOOM SPEED
VALUE
SELECT
SETUP
L/R
DIRECTION
U/D
DIRECTION
1
Power Button
6
RS232 Port
2
12V DC power supply
7
IP Port
3
Firmware Update Button
8
RS422 Port(B Set)
4
Anti-theft Slot
9
RS422 Port(A Set)
5
Tally Port
10
USB Port(for firmware update)
2. Button Setting Instructions
■SETUP : Keyboard Function Setting
■P/T SPEED
●Rotate: Move the pointer
●Press: Access selections
●Hold down: Joystick switch left/right
(Press for 3 seconds)
■ZOOM SPEED
●Rotate: Select parameters
●Press: Save parameters
●Hold down: Joystick switch
up/down
(Press for 3 seconds)
3. Initial setting
3.1 Connect the DC 12 V / 3 A power supply to the power port.
3.2 Use the network cable (CAT5 or CAT6) to connect the IP port on the back of the keyboard to
the local area network (LAN).
3.3 Press the power button to turn on the VS-KB30.
4. Camera Setting
4.1 Press [SETUP]=>[CAMERA SETTING] enter setting mode
4.2 Instruction on Setting
4.2.1 CAM : Set camera numbers, from 001 to 255
4.2.2 Title : Camera name, using letters and symbols on the keyboard to name the camera
4.2.3 Protocol : Camera communication method, selecting from VISCA, VISCAIP,
PELCO-D
PELCO-P,
>CAMERA SETTING
KEYBOARD SETTING
EXIT
>CAM001
TILE:-
Protocol: VISCA
EXIT
IP
Cat5 network cable
Cat5
network cable
Router
VS-KB30
Camera
5.1 Set VS-KB30 IP address
●Press SETUP and select[KEYBOARD SETTING]=[IP CONFIGURATION].
●Type select STATIC or DHCP.
●IP Address If select STATIC, use P/T SPEED to choose the location, input IP address
via numbers on the keyboard. Last, press ZOOM SPEED to save and exit.
5.2 Add Cameras
5.2.1 Automatic Search
●Press SEARCH
●Select VISCA-IP
*VISCA-IP：Search available VISCA over IP cameras on the internet
●Select the target camera; set the CAMID and Title for the camera
●Press ZOOM SPEED to save; then press EXIT to exit
5.2.2 Manual Add
●Press SETUP, and select [CAMERA SETTING]
●Set CAMID and Title
●Protocol Select VISCA-IP and set the camera IP address
●Press ZOOM SPEED to save; then press EXIT to exit
SELECT PROTOCOL
VISCA-IP
EXIT
>
Start Search?
>YES
NO & EXIT
Searched Cam: 1/5
>192.168.0.101
EXIT
VS-KB30 Installation Guide
Cat5
network cable
Cat5
network cable

www.MyLumens.com
6.How to Connect RS-232
RS-232
First
Camera
Second
Camera
Seventh
Camera
Third
Camera
First
Camera
Second
Camera
RJ45 to
RS-232 / RS422
Adapter Cable
6.1 Connect the RJ-45 to RS232 adapter cable to the RS232 port of VS-KB30
6.2 Please refer to the RJ-45 to RS232 adapter cable and camera Mini Din RS232 pin
definitions to complete the RS-232 connection on the camera end
7.1 Connect the RJ-45 to RS232 adapter cable to the RS422 port of VS-KB30
7.2 Please refer to the RJ-45 to RS232 adapter cable and camera RS422 pin definitions to
complete the RS422 connection on the camera end
7.How to Connect RS422
IP
VS-KB30
876
345
2 1
NO
Pins
Signals
1
DTR
Data Transmission Reade
2
DSR
Data Set Reade
3
TXD
Transmit Data
4
GND
Ground
5
RXD
Receive Data
6
GND
Ground
7
IR OUT
IR Commander Signal
8
N.C.
No Connection
1
RXD OUT-
2
RXD OUT+
3
TXD OUT-
4
TXD OUT+
5
GND
6
RXD IN-
7
RXD IN+
8
TXD IN-
9
TXD IN+
1
RXD OUT-
2
RXD OUT+
3
TXD OUT-
4
TXD OUT+
5
GND
6
RXD IN-
7
RXD IN+
8
TXD IN-
9
TXD IN+
1
RXD OUT-
2
RXD OUT+
3
TXD OUT-
4
TXD OUT+
5
GND
6
RXD IN-
7
RXD IN+
8
TXD IN-
9
TXD IN+
1
GND
2
RXD IN+
3
RXD IN-
4
TXD IN+
5
TXD IN-
1
GND
2
RXD IN+
3
RXD IN-
4
TXD IN+
5
TXD IN-
RJ45 to
RS-232 / RS422
Adapter Cable
※ Each A & B set can be connected in series up to 7 units
RS-422
A B
VS-KB30