Lumens VCB20DU User manual

VC-B20D
HD Camera
Installation Guide - English
[Important]
To download the latest version of Quick Start
Guide, multilingual user manual, software, or
driver, etc., please visit Lumens
http://www.Mylumens.com

English - 1
Table of Contents
Copyright Information.......................................................................................3
Chapter 1 Safety Instructions ..........................................................................4
Precautions..................................................................................................5
FCC Warning................................................................................................5
EN55022 (CE Radiation) Warning...............................................................5
Chapter 2 Package Contents............................................................................6
Chapter 3 Product Overview............................................................................7
3.1 Overview.............................................................................................7
3.2 Description of LED indicator...............................................................8
Chapter 4 Instruction for installation ..............................................................9
4.1 Preparation before installation............................................................9
4.2 Instruction for installation....................................................................9
4.3 Connecting the device......................................................................13
Chapter 5 Setting Menu Description .............................................................15
5.1 Functions of remote control..............................................................15
5.2 Setting menu ....................................................................................16
Chapter 6 Descriptions of Major Functions..................................................23
6.1 I would like to switch to VC-B20D ....................................................23
6.2 I would like to save the current lens position data............................23
6.3 I would like to clear the saved position data.....................................23
6.4 I would like to turn on the back light compensation function............23
6.5 I would like to adjust the shooting angle of the lens.........................23
6.6 I would like to zoom in/out images ...................................................23
6.7 I would like to adjust the focal length ...............................................24

English - 2
6.8 I would like to adjust theAF speed...................................................24
6.9 I would like to set the image mode...................................................25
6.10 I would like to freeze images............................................................25
6.11 I would like to rotate the image.........................................................25
6.12 I would like to change the camera direction.....................................25
6.13 I would like to display the current status ..........................................25
Chapter 7 DIP switch setting..........................................................................26
7.1 DIP SWITCH ....................................................................................26
Chapter 8 Troubleshooting.............................................................................28

English - 3
Copyright Information
Copyrights © Lumens Digital Optics Inc. All rights reserved.
Lumens is a trademark that is currently being registered by Lumens Digital Optics
Inc.
Copying, reproducing or transmitting this file is not allowed if a license is not
provided by Lumens Digital Optics Inc. unless copying this file is for the purpose
of backup after purchasing this product.
In order to keep improving the product, Lumens Digital Optics Inc. hereby
reserves the right to make changes to product specifications without prior notice.
The information in this file is subject to change without prior notice.
To fully explain or describe how this product should be used, this manual may
refer to names of other products or companies without any intention of
infringement.
Disclaimer of warranties: Lumens Digital Optics Inc. is neither responsible for any
possible technological, editorial errors or omissions, nor responsible for any
incidental or related damages arising from providing this file, using, or operating
this product.

English - 4
Chapter 1 Safety Instructions
Always follow these safety instructions when setting up and using the HD
Camera:
1. Use attachments only as recommended.
2. Use the type of power source indicated on the HD Camera. If you are not
sure of the type of power available, consult your dealer or local electricity
company for advice.
3. Always take the following precautions when handling the plug. Failure to do
so may result in sparks or fire:
Ensure the plug is free of dust before inserting it into a socket.
Ensure that the plug is inserted into the socket securely.
4. Do not overload wall sockets, extension cords or multi-way plug boards as
this may cause fire or electric shock.
5. Do not place the HD Camera where the cord can be stepped on as this may
result in fraying or damage to the lead or the plug.
6. Do not block slots and openings in the HD Camera case as poor ventilation
may lead to overheated HD Camera. Do not place the HD Camera on a sofa,
rug or other soft surface.
7. Never push objects of any kind through cabinet slots. Never allow liquid of
any kind to spill into the HD Camera.
8. Except as specifically instructed in this User Manual, do not attempt to
operate this product by yourself. Opening or removing covers may expose
you to dangerous voltages and other hazards. Refer all servicing to licensed
service personnel.
9. Unplug the HD Camera during thunderstorms or if it is not going to be used
for an extended period. Do not place the HD Camera or remote control on
top of vibrating equipment or heated objects such as a car, etc.
10. Unplug the HD Camera from the wall outlet and refer servicing to licensed
service personnel when the following situations happen:
If the power cord or plug becomes damaged or frayed.
If liquid is spilled into the HD Camera or the HD Camera has been
exposed to rain or water.
<Note> Using an incorrect battery type in the remote control may result in
breakdown. Follow local instructions on how to dispose of used batteries.

English - 5
Precautions
Warning: To reduce the risk of fire or electric shock, do not expose this
appliance to rain or moisture.
If HD Camera will not be used for an extended time, unplug it from the power
socket.
Caution: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts
inside. Refer servicing to licensed service personnel.
This symbol indicates that this
equipment may contain
dangerous voltage which could
cause electric shock.
This symbol indicates that there are
important operating and
maintenance instructions in this
User Manual with this unit.
FCC Warning
This HD Camerahas been tested and found to comply with the limits for a ClassA
computer device, pursuant toArticle 15-J of FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
EN55022 (CE Radiation) Warning
This product is intended for use in a commercial, industrial, or educational
environment. It is not intended for residential use.
This is a ClassA product. In a residential environment it may cause radio
interference, in which case the user may be required to take adequate measures.
The typical use is in a conference room, reception room or hall.
Note
Risk of Electric Shock
Please do not open it by yourself.

English - 6
Chapter 2 Package Contents
VC-B20D
Instruction for
installation
Remote control

Power cord
Power Adapter
Appearance may vary
depending on country/region

English - 7
Chapter 3 Product Overview
3.1 Overview
1. Camera lens
2. Power LED indicator
3. Standby LED indicator
4. Power input
5. Camera Control(RS232 IN)
6. DVI-I output
7. Output Switch
8. IR Select
Front View
Back View









English - 8
3.2 Description of LED indicator
3.2.1Power：
3.2.1.1 No light: Power off
3.2.1.2 Green light: In use
3.2.1.3 Flickering green: Signal from the remote control is received; the
indicator flickers every 0.5 second
3.2.2Standby：
3.2.2.1 Orange: In standby mode
3.2.2.2 No light: Power on

English - 9
Chapter 4 Instruction for installation
4.1 Preparation before installation
Installation and connection of HD camera requires special skills. To install by
yourself, please follow necessary steps, ensure steady and tight installation of the
device, and pay attention to your safety to avoid any accident.
4.1.1 Ensure the safety of the installation environment. Please do
not install the device on unstable ceiling or in a place where
the device is in danger of falling to avoid any accident.
4.1.2 Please check whether accessories in the box are complete
or not. Please contact the supplier for any shortage, and
make sure to keep the accessories in the box intact.
4.1.3 Please choose a proper place for installation of camera in
advance. Please determine an installation place according
to the following requirements.
4.1.1.1Confirm the position for the object to be captured.
4.1.1.2Confirm whether the camera is set at a proper distance from
other light sources.
4.2 Instruction for installation
4.2.1 I would like to install camera on the desk
4.2.1.1 Precautions for installation
Please install the machine on a flat desk
Do not grab the camera head by hand when handling the device
Do not rotate the camera head by hand. Improper rotation may
result in breakdown of the camera

English - 10
4.2.1.2 Installation steps
1. Install the camera on the wall with VC-AC03
<Remark> For the installation of VC-AC03, please refer to
VC-AC03 Quick Installation Guide
4.2.1.3 Camera Size
Length x Width x Height : 267.69 x 123 x 155.60 mm
Weight : 1.3 Kg

English - 11

English - 12
4.2.1.4 Precautions for installation
1. Before installation, please confirm the orientation of the
machine relative to the object to be captured
2. It is recommended that the machine should be set at a distance
of more than 1 meter away from the object to be captured.
Please adjust for a best distance according to the magnification
of the lens

English - 13
4.3 Connecting the device
4.3.1 Image output
4.3.1.1 Connecting to a HDTV/computer monitor (DVI)
4.3.2 Use control panel to control the Camera
DVI cable
Monitor or HDTV
RS232 Cable
Compact Camera Controller

English - 14
4.3.3 IR Out
IR Out includes IR Right and IR Left, use VISCAcommand to switch:
1. IR right and IR left ON
2. IR left OFF, IR right ON
3. IR left ON, IR right OFF
4. NA (no signal from IR receiver)
IR Right
IR Left

English - 15
Chapter 5 Setting Menu Description
5.1 Functions of remote control
<Remark> The below functions are listed alphabetically.
Item
Description
,,,
Move the lens
Back Light
Turn on/off back light compensation
Camera
select
Select 1 ~ 3 VC
Focus-
Manual /
Far/Near
Turn on manual focus to adjust the
focal length
Focus-Auto
Auto focus
Freeze
Freeze the screen
Home-Enter
Go back to the main page / Execute
Info
Status information
L/R
Direction Set
L/R Direction / Normal
Menu
Display OSD menu
Mirror
Rotate the image (OFF / Mirror /
Flip / Mirror + Flip)
Pan/Tilt
Reset
Clear the Pan / Tilt setting
Picture
Switch image effect (Disable / Film /
Black&White)
Power
Power switch
Preset
Appoint an ID (0 ~ 9) to save the
current position data
Reset
Appoint an ID (0 ~ 9) to delete the
current position data
Zoom-Fast
Adjust image size
Zoom-Slow
Fine-tune image size

English - 16
5.2 Setting menu
<Remark>The bold underlined values in the following table are defaults.
1st Level
Major
Items
2nd Level
Minor Items
3rd Level
Adjustment
Values
Function Descriptions
Exposure
Mode
1. Full Auto
2. Shutter Pri
3. Iris Pri
4. Manual
5. White Board
Exposure mode setting
Exposure_Co
mp.
On/Off
AE Level
Exposure_Co
mp. Level
-6~0~4
The value can be adjusted
only after
Exposure_Comp. is
activated
Spot Light
On/Off
The value can be adjusted
when the mode is set to
Full Auto or Shutter Pri
Spot Light
Position
X(0~8)Y(0~6)
The value can be adjusted
only after Spot Light is
activated
Shutter Pri
60/30
mode
50/25
mode
Shutter priority setting
1/10000
1/10000
1/5000
1/5000
1/3000
1/3000
1/2500
1/2500
1/2000
1/1750
1/1500
1/1250
1/1000
1/1000
1/725
1/600
1/500
1/425
1/350
1/300

English - 17
1/250
1/215
1/180
1/150
1/120
1/120
1/100
1/100
1/90
1/75
1/60
1/50
1/30
1/25
1/15
1/12
1/8
1/6
1/4
1/3
1/2
1/2
1/1
1/1
Iris Pri
1. F2.8
2. F4
3. F5.6
4. F8
5. F11
6. F16
IRIS priority setting
Manual Gain
1. 0dB
2. 2 dB
3. 4 dB
4. 6 dB
5. 8 dB
6. 10 dB
7. 12 dB
8. 14 dB
9. 16 dB
10. 18 dB
11. 20 dB
12. 22 dB
13. 24 dB
14. 26 dB
15. 28 dB
16. 30 dB
Manually set the gain

English - 18
Manual Speed
60/30
mode
50/25
mode
Manually set the shutter
1/10000
1/10000
1/5000
1/5000
1/3000
1/3000
1/2500
1/2500
1/2000
1/1750
1/1500
1/1250
1/1000
1/1000
1/725
1/600
1/500
1/425
1/350
1/300
1/250
1/215
1/180
1/150
1/120
1/120
1/100
1/100
1/90
1/75
1/60
1/50
1/30
1/25
1/15
1/12
1/8
1/6
1/4
1/3
1/2
1/2
1/1
1/1
Manual Iris
1. F2.8
2. F4
3. F5.6
4. F8
5. F11
6. F16
Manually set the IRIS

English - 19
Gain Limit
1. 8 dB
2. 10 dB
3. 12 dB
4. 14 dB
5. 16 dB
6. 18 dB
7. 20 dB
8. 22dB
9. 24dB
10. 26 dB
11. 28 dB
12. 30dB
Max. limit value of
electron gain
WDR
1. Off
2. 1
3. 2
4. 3
5. 4
6. 5
WDR settings
White
Balance
Mode
1. Auto
2. Indoor
3. Outdoor
4. One Push WB
5. ATW
6. Manual
7. 3000K
8. 4300K
9. 5000K
10. 6500K
11. 8300K
12. Wide Auto
13. Sodium Lamp
Select the color
temperature mode
One Push
Trigger
ENTER
One push trigger
Manual B
Gain
0~ C~60
Adjustable when the white
balance mode is set to
Manual