Lumens CaptureVision VS-LC101 User manual

VS-LC101/VS-LC102
CaptureVision Station
[Important]
User Manual - English
To download the latest version of Quick Start Guide,
multilingual user manual, software, or driver, etc.,
please visit Lumens
http://www.MyLumens.com/support.php

1
Table of Contents
Copyright Information...................................................................................... 4
Chapter 1Safety Instructions ......................................................................... 5
Chapter 2Package Contents .......................................................................... 7
Chapter 3Product Overview........................................................................... 8
3.1Front-End Panel Descriptions.............................................................................. 8
3.2Rear-End I/O Descriptions.................................................................................... 8
3.3Panel Keys Descriptions...................................................................................... 9
3.4Panel Indicator Introduction ................................................................................ 9
3.5Remote Control Buttons Descriptions.............................................................. 10
Chapter 4System Requirements.................................................................. 12
4.1Basic Devices...................................................................................................... 12
4.2Recommended Devices...................................................................................... 12
Chapter 5Instruction for installation ........................................................... 13
5.1How to Connect................................................................................................... 13
5.2Initial Setup.......................................................................................................... 15
Chapter 6OSD Function Descriptions......................................................... 22
6.1Setting Menu ....................................................................................................... 23
6.2Basic Instruction................................................................................................. 24
Chapter 7Web Function Description – System Configuration.................. 30
7.1System Configuration......................................................................................... 31
7.1.1System Information ........................................................................................................... 31
7.1.2Video Source Setting......................................................................................................... 32
7.1.3Network Setting.................................................................................................................. 33
7.1.4Record Setting ................................................................................................................... 33
7.1.5Local Storage Setting........................................................................................................ 35
7.1.6Layout Manager ................................................................................................................. 35
7.1.7Lecture Manager Configuration ....................................................................................... 36
7.1.8Photo Manager................................................................................................................... 36
7.1.9Event Log: .......................................................................................................................... 37
7.1.10About Page Description.................................................................................................... 37
7.2System Configuration Operation....................................................................... 38
7.2.1Change Host Name............................................................................................................ 38
7.2.2Change System Time......................................................................................................... 38
7.2.3Source Setting.................................................................................................................... 38

2
7.2.4Connect IP Camera............................................................................................................ 39
7.2.5Volume adjustment............................................................................................................ 41
7.2.6Add Logo or Other Video in a Video................................................................................ 41
7.2.7Storage Device Setting...................................................................................................... 42
7.2.8Layout Management.......................................................................................................... 43
7.2.9Lecture Manager................................................................................................................ 44
7.2.10Edit Lecture Keynote......................................................................................................... 45
7.2.11Change Username and Password.................................................................................... 45
7.2.12Startup Screen ................................................................................................................... 46
7.2.13Network Setting.................................................................................................................. 46
7.2.14Webpage Language........................................................................................................... 46
Chapter 8Webpage Function Description-Director.................................... 47
8.1Director Instructions........................................................................................... 48
8.1.1Director Introduction......................................................................................................... 48
8.1.2Director Instructions.......................................................................................................... 49
8.1.3Director Screen Instructions - Record Setting ............................................................... 50
8.2Director Instructions........................................................................................... 51
8.2.1Basic Recording Operations ............................................................................................ 51
8.2.2Change Display Layout..................................................................................................... 51
8.2.3Insert Key Notes................................................................................................................. 51
8.2.4Network Camera Control................................................................................................... 52
8.2.5Other Recording Settings................................................................................................. 52
8.2.6Webpage Language........................................................................................................... 52
Chapter 9Web Page Function Description - Viewer................................... 53
9.1Page Description................................................................................................. 54
Chapter 10Advanced Function Menu ..................................................... 55
10.1Enable Automatic Recording Backup ................................................... 55
10.1.1Set Up FTP Connection..................................................................................................... 55
10.1.2Backup Setting................................................................................................................... 56
10.2Use RTP to Share Screen ....................................................................... 57
10.2.1Set RTP Sharing................................................................................................................. 57
10.2.2Start RTP Sharing.............................................................................................................. 57
10.2.3View Screen Sharing ......................................................................................................... 57
10.2.4Use Online Director page for RTP sharing setup........................................................... 58
10.3How to live stream................................................................................... 59
10.3.1Enable the YouTube live streaming................................................................................. 60
10.3.2Create a live event ............................................................................................................. 62
10.3.3Configure VS-LC101/VS-LC102........................................................................................ 64
10.3.4Start live streaming............................................................................................................ 65

3
10.4Insert and Use Key Notes....................................................................... 66
10.4.1Insert Key Notes................................................................................................................. 66
10.4.2Modify Index....................................................................................................................... 66
10.4.3Use Key Notes.................................................................................................................... 67
10.5PPT Installation and Instructions........................................................... 67
10.5.1Installation.......................................................................................................................... 67
10.5.2Interface Description......................................................................................................... 67
Chapter 11Troubleshooting..................................................................... 69
Attachment 1 ................................................................................................. 71

4
Copyright Information
Copyrights © Lumens Digital Optics Inc. All rights reserved.
Lumens is a trademark that is currently being registered by Lumens Digital Optics Inc.
Copying, reproducing or transmitting this file is not allowed if a license is not provided by
Lumens Digital Optics Inc. unless copying this file is for the purpose of backup after
purchasing this product.
In order to keep improving the product, Lumens Digital Optics Inc. hereby reserves the right
to make changes to product specifications without prior notice. The information in this file is
subject to change without prior notice.
To fully explain or describe how this product should be used, this manual may refer to
names of other products or companies without any intention of infringement.
Disclaimer of warranties: Lumens Digital Optics Inc. is neither responsible for any possible
technological, editorial errors or omissions, nor responsible for any incidental or related
damages arising from providing this file, using, or operating this product.

5
Chapter 1Safety Instructions
Please use the product following the safety instructions below:
1 Operation
1.1 Please use the product in the recommended operating environment.
1.2 Do not place the product in tilted position.
1.3 Do not place the product on an unstable trolley, stand or table.
1.4 Do not use this product near water or source of heat.
1.5 Use attachments only as recommended.
1.6 Use the type of power source indicated on this product. If you are not sure of the
type of power available, consult your dealer or local electricity company for advice.
1.7 Always take the following precautions when handling the plug. Failure to do so may
result in sparks or fire:
Ensure the plug is free of dust before inserting it into a socket.
Ensure that the plug is inserted into the socket securely.
1.8 Do not overload wall sockets, extension cords or multi-way plug boards to avoid
potential risks.
1.9 Do not block slots and openings in the case of this product as poor ventilation may
lead to overheating of this product.
1.10 Except as specifically instructed in this User Manual, do not attempt to open or
remove covers by yourself. It may expose you to electric shock or other hazards.
Refer all servicing to licensed service personnel.
1.11 Unplug this product from the outlet and refer servicing to licensed service personnel
when the following situations happen:
If the power cords are damaged or frayed.
If liquid is spilled into the Product or the Product has been exposed to rain or water.
2 Storage
2.1 Do not place the Product where the cord can be stepped on as this may result in
fraying or damage to the lead or the plug.
2.2 Never push objects of any kind through cabinet slots. Never allow liquid of any kind
to spill into the Product.
2.3 Unplug this product during thunderstorms or if it is not going to be used for an
extended period.
2.4 Do not place this product or accessories on top of vibrating equipment or heated
objects.
3 Cleaning
3.1 Unplug all the cables before cleaning. Use a damp cloth for cleaning. Do not use
liquid or aerosol cleaners.
4 Remote control (if the accessories are equipped with remote control)
4.1 Using an incorrect battery type in the remote control may result in breakdown.
Follow local instructions on how to dispose of used batteries.
FCC Warning
This HD Camera has been tested and found to comply with the limits for a Class B digital
device, pursuant to Article 15-J of FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a commercial installation.
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus as set out in the interference-causing equipment standard
entitled "Digital Apparatus," ICES-003 of Industry Canada.
Cet appareil numerique respecte les limites de bruits radioelectriques applicables aux

6
appareils numeriques de Classe B prescrites dans la norme sur le material brouilleur:
"Appareils Numeriques," NMB-003 edictee par l'Industrie.

7
Chapter 2Package Contents
VS-LC101/VS-LC102 Quick Installation Guide Remote Control
Power Adapter Battery x 4 DIDO connector
Appearance may vary
depending on country/region
Quick Installation Guide

8
Chapter 3Product Overview
3.1 Front-End Panel Descriptions
NO. Name Function Descriptions
1. Remote
Control
Receiver
Infrared remote control reception area
2. Indicator Recording/Power
3. Function
Shortcuts
Record/Play/Pause/Stop/Menu/Channel/Layout Display
4. Operation
Selection
Up/Down/Left/Right/Return/OK
5. Power Button Power Switch
6.
USB Port Use the USB drive to insert an export file or proceed with
firmware update through the USB drive
3.2 Rear-End I/O Descriptions
NO. Name Function Descriptions
7. Power IN 12V/2A
8. Image Input VGA/HDMI device image input
Note: Compatible with DVI to HDMI adapter or VGA adapter for
device ima
g
e input
9. Ima
g
e Out
p
ut VGA/HDMI device ima
g
e out
p
ut
10.
A
udio In Line/MIC device Audio In
11.
A
udio Out
A
llows line audio out to am
p
lifier transfe
r
12. Hard Disk In USB/eSATA interface for hard drive stora
g
e
13. WAN LAN access
14. LAN port 1. Image input for IP camera
2. Connect to the computer directly for online management
o
p
erations
15. DIDO RS-232 control si
g
nal
p
ort
16. Reset Reset to factor
y
default settin
g
s

9
3.3 Panel Keys Descriptions
NO. Icon Name Function Descriptions
1. Power Turn on and off.
2. ●Record Start recording.
3.
Play/Pause Play video/Pause video during playback
4. ■Stop Stop playback/Exit recording
5. Menu Enter Main Menu: Playback/Recording/Settings
6.
CH Channel Change channels.
7. Layout
Display
Change monitor layout during playback
8.
＾﹀〈〉 Direction
Keys
Move up/down/left/right and select item
9.
OK OK Execute item in the menu screen. Enlarge display
window during playback
10. Return Return to the previous menu or cancel selection
3.4 Panel Indicator Introduction
Indicator Indicator Display Description
Record Orange light stays lit Recording in progress
Power
Red light stays lit In standby mode
Red and green
indicators alternately
flicker
Startup in progress
Green light stays lit Startup completed
Flickering red light Abnormal fan
Flickering green light
(once) Receiving remote control command
<>
Record Power

10
3.5 Remote Control Buttons Descriptions
When using the remote control, please point the remote control at the infrared reception area on the
front panel of the product to ensure that the signal is successfully received. The valid angle of the
remote control is +/- 30°, and the vertical range is within 10 m.
<Remark 1> The remote control and panel commands become invalid when controlling the product
through the web.
<Remark 2> The camera control function becomes available once the Webcam channel is switched to
full-screen mode.
NO. Icon Name Function Descriptions
1. Power Turn on and off
2. Aspect Ratio Automatic output resolution detection and adjustment
3. ABCD A: Exit export USB drive
B ~ D: Function keys; please refer to the instructions
provided on each
4. Numeric Keys Camera: PRESET setting by the camera
5. ●Record Start recording
6. Snapshot Capture screenshot and save as image file
7. Menu Enter/Exit Menu

11
NO. Icon Name Function Descriptions
8. Return Return to the previous menu or cancel selection
9. Layout
Display
Change monitor layout during playback
10.  Top, Bottom,
Left and Right
LC101: Move up/down/left/right and select item
Camera: Rotate camera lens
11. OK OK Select and activate menu item
12. Exit Exit all settings or dialogue windows and return to
display window
13. Maximize
Display
Sequentially switch between the methods for maximizing
windows of all channels
14. Volume/
Slow zoom
LC101: Adjust volume
Camera: Fine-tune image size
15. CH Channel/
Fast zoom
LC101: Switch layout channels
Camera: Adjust image size
16. Mute Turn off sound
17. Information Display detailed video information
18. Previous Key
Note
Next Key
Note
During playback, select key note to rapidly switch
chapters
[Remark] Key notes must be inserted within the video
beforehand to activate this function
19. Recording
Layout
Changing screen layout during recording
20. Play Play video. Press this key during playback to pause the
video.
21. Pause Pause video playback/recording
22. ■Stop Stop video playback/recording
23. Previous/Next Skip to previous/next video during playback
24. P1 Reserved
25. P2 Reserved
26. P3 Reserved
27. Home Camera: Return to initial position
28. Set Preset Camera: Set default position
29. Zoom In Camera: Zoom in the image
30. Zoom Out Camera: Zoom out the image

12
Chapter 4System Requirements
To control this product remotely via the Internet, please use the following
recommended browser:
Browser Version
Operating System
Windows MAC
FireFox 33.03 and above Yes Yes
IE IE9 and above Yes NA
Safari 7.1 and above NA Yes
360 Safe
Browsing
7.1 and above
(Applicable only
in “Speed Mode”)
Yes NA
4.1 Basic Devices
VS-LC101/VS-LC102 x 1
Computer (or Laptop) x 1
Router x 1 (Giga routers are recommended)
Lumens Webcam x 1-3; e.g. VC-A20P x 3
Network cables x 3-5
HDMI or VGA cable x 2
Speaker x 1
Microphone x 1
External hard drive (for VS-LC101): USB or eSATA external hard drive x 1
4.2 Recommended Devices
Display x 1
Amplifier x 1
Mixer x 1
[Remark] The number of connected devices can be increased or adjusted based on
environment needs

13
Chapter 5Instruction for installation
5.1 How to Connect
Please follow the following instructions to connect your devices.
NO. Function How to connect
1. Power Connect the power cord
2. Image Input Connect the image output cable of the computer with the image
input port (HDMI IN/VGA IN) to establish an HDMI or VGA
connection
Note: Alternative devices can be used to replace the computer as the
image input device, such as cameras or projectors…
3. Image Output Connect HDMI OUT to HDMI of the TV screen
Note: If HDMI is not available on the TV, adapters can be used
according to the specification of the TV
4. Audio In Connect the audio input cable of a line device, such as an
amplifier, mixer, or microphone
5. Audio Out Connect the audio output cable of a line device, such as an
amplifier
6. Storage
Device
Insert a USB or eSATA external hard drive as the storage
device
7. WAN Connect the WAN port to the router and computer to remotely
control the VS-LC101/VS-LC102
Note: Please connect the computer to the LAN port (8) first,
and then connect the computer to a router after the completion

14
of external network settings
8. LAN port 1. Connect an IP camera (e.g. VC-A20P) as the image input
2. Connect to the computer directly for online management; for
the initial use, please connect the port for further operations
9. Digital I/O Connect the RS232 device
5.1.1 Digital I/O Pin Descriptions
5.1.2 Digital I/O Connection Descriptions
VS-LC101/VS-LC102 Digital I/O DIDO connector
5.TxD RxD
4.RTS CTS
3.RxD TxD
2.CTS RTS
1.Gnd Gnd
Pin NO. Function
1 Gnd
2 CTS
3 RxD
4 RTS
5 TxD

15
5.2 Initial Setup
5.2.1 Confirm and Set the VC-A20P Network Settings
Use a C-Video or a DVI cable to connect the VC-A20P with the monitor
(please refer to the connection diagram for the connection method).
After startup, press the [MENU] on the VC-A20P remote control to
open the OSD menu.
Scroll down to [Ethernet], and press [ ] to enter.
Press [ ] to enter the [DHCP] settings screen. Confirm [DHCP] is set as
[Closed].
Press [MENU] to exit the [DHCP] settings screen.
Confirm the default [IP Address] is set as [192.168.100.150].
[Remark] If more than one VC-A20P devices are installed, sequentially modify the IP
addresses as [192.168.100.x], e.g. [192.168.100.151], [192.168.100.152],
and so forth…
After confirming the IP addresses and completing modifications, press
[MENU] repeatedly to exit the OSD menu.
/
[Remark] For more instructions related to VC-A20P operations, please go to the
Lumens website and download the VC-A20P User Manual
Before continuing with settings below, please ensure that the settings in 5.1 How
to Connect have been completed.
5.2.2 Confirming the VS-LC101/VS-LC102 IP Address
Press the button on the VS-LC101/VS-LC102 remote control to open
the OSD menu.
Scroll right to [Setting] and press [OK] to enter the settings screen.
Scroll down to [About] and press [OK] to enter the [About] page and
confirm the IP address.
Repeatedly press the button to exit the OSD menu.
[Remark] If the IP address indicates 169.175.x.x, reconfirm the connection and the
router settings.
DVI Cable
Monitor or HDTV
C-Video Cable
TV

16
5.2.3 Connecting to the VS-LC101/VS-LC102 Webpage (Incl., log in)
[Remark 1] For the initial setting, please directly connect the computer to the
VS-LC101/VS-LC102 LAN port, and set to automatically obtain IP address
Open the computer’s Internet browser.
[Remark 2] For the browser, it is recommended to use Firefox or Safari (for MAC)
Enter the VS-LC101/VS-LC102 IP address; e.g. http://192.168.1.150 (default
IP address)
Select [System Configuration]
Enter the VS-LC101/VS-LC102 Admin username and password.
User: admin
Password: admin
VS-LC102
IP Address

17
Click [Log in] to enter the System Configuration.
5.2.4 Settings
1 Confirm Time Setting
Confirm the time setting. The time can be manually set or chosen from
other NTP servers if modifications are required.
2 Confirm hard drive status
Open the [Local Storage Setting]
Confirm hard drive status and then configure depending on the status
Unformatted: Click to format the hard drive, which will take several
minutes depending on the storage device format; do not close the page
until successful operation (Note: Backup hard drive prior to formatting, as
it will erase the whole hard drive)
Unmounted: Follow the instruction below to mount the hard drive
Mounted: Skip this step to connect to a camera
Check [Enable Local Storage] to mount the hard drive.
Check [Cycling Record] to cycle hard drive space. When the hard drive
space is used up, the oldest data will be automatically overwritten by the
newest data, allowing the system to continue storing information.
Select the drive [SATA/USB/eSATA] and choose the desired storage
device.
Select [SATA] for VS-LC102 with built-in hard drive.
Select [USB/eSATA] for VS-LC101 connected with an external hard
drive.
Click [Apply] to apply the settings.
The storage device status changes to [Mounted], indicating that the
storage device has been successfully set.


18
3 Connect IP Camera
Open the [Source Setting].
Click on [Discovery] and then [Refresh].
After the search is complete, the available camera will be shown in the
list. Select the .
Enter the VC-A20P account name and password.
Administrator: admin
Password: 9999
Click [Submit], and wait until the camera status changes to [OK].









19
4 Image Input Settings
Click [Source Setting] and set the video sources for CH1, CH2, CH3,
and CH4.
Click [Channel 1] and select [Computer] as the channel name, press ,
select [Video Port] in Video Setting; and [HDMI1 or VGA1] in Video Port.

CH2: IP camera Select camera
Select available image input for CH3 and CH4.
Click [X] on the upper right to close the settings window.
Click [Apply] to apply the settings.



