LUMIEN CORE A6B1 User manual

Lumien Lighting | Website: www.lumienlighting.com | E-mail: [e-mail]
INSTRUCTION MANUAL
(MODULAR LED)
MODELS
Brass Aluminum
CORE
A6B1 A6A1
WW PRO
A7B1 A7A1
RGBWW PRO
A9B1 A9A1
WARNING –To reduce the risk of FIRE OR INJURY TO PERSON:
•Turn off/unplug the fixture and allow to cool before handling; making any adjustments or repairs or replacing the
integrated light module.
• Integrated light module gets HOT quickly. Only touch the switch/plug when turning on.
• Do not touch the lens, guard, or enclosure when hot.
• Keep integrated light module away from materials that could ignite/ combust/ burn.
• Do not touch the integrated light module chip at any time. Use a soft cloth. The oils from skin could damage LED.
• Do not operate the fixture with a missing or damaged securing lens cap (part C).
Wattage
CORE: 4W / 8W
Voltage Range
10-15V
Lumen Output
4W: 230 Lumens
8W: 450 Lumens
Color Temp
2700K 3000K
Beam Spread
Adjustable
CRI
80+
Lifespan
50,000 Hrs.
Finishes
Brass: Antique
Aluminum: Bronze, Black
Housing
Material
Brass
Aluminum
Light Source
Integrated LED Module
Wattage
WW PRO: 7W
RGBWW PRO: 7W
Voltage Range
10-15V
Lumen Output
WW PRO: 245 Lumens
RGBWW PRO: XXX Lumens
Color Temp
WW/RGBWW
Beam Spread
Adjustable
CRI
80+
Lifespan
50,000 Hrs.
Finishes
Brass: Antique
Aluminum: Bronze, Black
Housing
Material
Brass
Aluminum
Light Source
Integrated LED Module

Lumien Lighting | Website: www.lumienlighting.com | E-mail: [e-mail]
WARNING –Risk of Electric Shock:
•Install in accordance with all local codes and ordinances.
•Install all luminaires at least 10 feet (3.05 m) from a pool, spa, fountain, etc.
•A fixture shall not use tungsten halogen lamps unless the luminaire is marked for such lamp
IMPORTANT
TRANSFORMER
•Install in accordance with all local codes and ordinances.
•Only use a UL1838 transformer for safety reasons and to ensure full lifespan of the fixture.
•Ensure that the transformer is plugged in to a GFCI protected circuit
Fixture
DO NOT EXCEED 15 VOLTS IN THIS FIXTURE
•Install in accordance with all local codes and ordinances.
•This fixture functions best when the incoming voltage is between 10–15 volts. Voltages outside of this range could
damage the fixture, shorten the life, and cause unsatisfactory performance. The use of improper voltage voids the
product warranty.
LOW VOLTAGE CABLE
•Install in accordance with all local codes and ordinances.
• Be protected by routing near the luminaire, or next to a building structure such as a house or deck.
• Not be buried except for a maximum of 6 inches (15.2 cm) to connect to the main low voltage cable.
• Have the length cut off so that it is connected to a connector within 6 inches (15.2 cm) from a building structure, a
luminaire, or fitting.
It is not recommended to use Quick Clip style connectors because they are not waterproof and can rot creating
resistance and shorts. Only use outdoor rated waterproof wire connectors. Install in accordance with all local codes and
ordinances.
LED LIFE
• For maximum light output, adjust lighting circuits to provide between 10-15 volts.
•Voltage can be regulated by adjusting circuit load/run.
• To determine circuit voltage, use a digital voltmeter at the fixture.

Lumien Lighting | Website: www.lumienlighting.com | E-mail: [e-mail]
INSTALLATION
A-Path Light Cap B-Module/Riser C-Stake D-Full Assembled Fixture E-Waterproof Wire Nut
•Carefully remove the fixture from its protective packaging.
•Screw riser/module (B) onto stake (C).
•Pass the fixture wire into the slot of the stake (C).
•Install the fixture in the ground and connect fixture wires to main low voltage wire run using outdoor rated waterproof
wire nuts (E).
•Screw on path light cap (A).
•For the PRO Fixture , please see the Remote User Guide in the remote box.
Beam Spread Adjustment
•Illumination range can be adjusted from 1.6ft to 6.6ft from center by twisting the shroud (B) up or down which is
located under the light fixture cap.
Narrow Spread: Rotate clockwise
Widen Spread: Rotate counterclockwise

Lumien Lighting | Website: www.lumienlighting.com | E-mail: [e-mail]
Accessories
SHADE
SPIKE
LIMITED WARRANTY
WHAT IS COVERED
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship from date of
purchase for a period of ten (10) years for Aluminum and Lifetime for Brass. This warranty applies only to the original
consumer purchaser and only to products used in normal use and service. If this product is found to be defective, the
manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the
manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident,
modification, alteration, neglect, or mishandling.
WHAT IS NOT COVERED
This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any way
not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the
product because of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not
relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product,
such as surface and/or weathering, finish defects or fusing of the metals are considered normal wear and tear due to
proximity to harsh environments; this includes but is not limited to coastal areas, ground water (minerals and impurities)
and chemicals used in the landscape. The manufacturer does not warrant and especially disclaims any warranty,
whether expressed or implied, of fitness for a purpose, other than the warranty contained herein. The manufacturer
specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but
not limited to any labor/expense costs involved in the replacement or repair of said product.