*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
Page 4 of 7
Please read all instructions prior to installation and keep for future reference!
1. Product to be installed by a qualied electrician.
2. Prior to installation ensure power is off at fuse box to prevent electrical shock.
Touch Screen DMX Controller - Installation Instructions
Models TSDMX
7777 Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
www.luminii.com
1
2
3
4
5
6
7
8
A B C D E
dimmer
speed
color
-+
How to use
blue light is used to indicate if unit is on/off
Buttons 1-8 are used to select individual scenes.
Scenes can be static or dynamic. Double pressing
buttons 1-8 will reset the Dimmer, Speed, and Color to default
Used to cycle between 25 different pages (A,B,C,D,E x 5).
In combination with buttons 1-8, 200 different scenes
can be stored.
The select button allows you to cycle through the Dimmer,
Speed, and Color fader controls. The fader at the bottom
of the unit is used to select the intensity of the Dimmer,
Speed, and Color settings.
The Green LED indicates that the Dimmer, Speed, and
Color settings on the STICK are set to default. If the fader
is moved to the right or left of the default (green), one of the
8 blue LED’s will indicate your current intensity level.
The colorized fader of the D2 design offers a
direct access to basic colorswith a simple touch.
A truly simple controller: an on/off button at the top, 8 buttons to choose from up to 200 lighting effects (25x8), 2 buttons
to cycle between pages and a horizontal fader to instantly adjust dimmer, speed and color.
REV2.4
