LumiSource LS-LOLLIPOP User manual

Lollipop Lamp
Assembly Instructions
Instrucciones De Asamblea
Instructions d’Assemblée
Part # LS-LOLLIPOP January 2009
1. Insert pole A into base. Screw to secure.
2. Screw poles A, B, and C together.
You may need to gently pull the cord
through from the base. Be careful not
to damage the cord when pulling
through-(pull straight from opening).
3. Screw plate into pole C. You will need to
carefully pull the cord through the base in
order to complete this step.
4. Insert a light bulb.
To Secure the Shade:
5. Loosen the 3 Caps (D) under the plate.
Do not completely remove the caps.
6. Slide the 3 brackets (E) toward the bulb.
7. Carefully set the glass shade inside the
plate’s groove. Do not force the glass if
your brackets are not in the correct position.
8. Slide the 3 brackets (E) all the way to
outside, and secure the 3 caps (D).
A
B
C
Base
Plate
D
E