LumiSource SPYRA BAR STOOL BS-SPYRA User manual

Spyra Bar Stool
Assembly Instructions
Instrucciones De Asamblea
Instructions d’Assemblée
Part # BS-SPYRA December 2010
A
B
C
H
G
F
E
ON/OFF
CHARGE I
Part List
1 Seat with backrest (A)
4 Screws (B)
4 Washers (C)
1 LED Mechanism (D)
1 Metal pole with
footrest (E)
4 Bolts (F)
1 Hydraulic pole (G)
1 Base (H)
1 Adapter (I)
Instructions
Assembly
1. Remove protective cap from Hydraulic pole (G).
2. Insert Hydraulic pole (G) into Base (H).
3. Place Metal pole (E) over Hydraulic pole (G).
4. Insert LED Mechanism (D) into Metal Pole (E).
5. Place Seat (A) over LED Mechanism (D) and Metal
pole (E) .
6. Secure by placing Screws (B) and Washers (C) into
Seat (A). Fasten Screws (B) and Bolts (F).
7. Carefully sit on Seat (A) to secure.
Operation
1. Charge internal battery using Adaptor (I).
NOTE: Bar stool MUST be turned o charge.
2. Push SPEED button to regulate color phasing.
3. Push ON/OFF button to turn LEDs on and o.
4. Push HOLD button to pause LEDs on specic colors.
3. Adjust height using lever.
ATTENTION:
This cap must be
removed prior to
assembly!
D
SPEED
HOLD
UP/DOWN