
Introduction
To get the most out of your new fan heater,
please read through these instructions and the
attached safety regulations before use. Please
also save the instructions in case you need to
remind yourself of the fan heater’s functions
at a later date.
The fan heater dials
Special safety regulations
xThe fan heater is not suitable for use
outdoors in damp weather, in bathrooms
or in other wet or damp environments.
xPlease note that the fan heater can
become very hot and should, therefore,
be placed at a safe distance from
flammable objects such as furniture,
curtains and similar.
xDo not cover the fan heater.
xDo not place the fan heater immediately
under a wall socket.
xDo not connect the fan heater using an
on/off timer or other equipment which
can automatically switch the device on.
xThe fan heater must not be placed in
rooms where flammable liquids or gases
are used or stored.
xIf an extension cord is used, it must be as
short as possible and always be fully
extended.
xYou must not connect other appliances to
the samemains socket as the fan heater.
If the fan heater is to be permanently
installed, the following instructions must
be observed:
Use
xPosition the fan heater so that it stands
upright on a firm surface and at a safe
distance from wet environments and
flammable objects.
xConnect the fan heater to the mains.
xSet the thermostat dial to the maximum
ENGLISH
Original instructions
temperature.
xThe fan heater will switch on when the
function selector is set to one of the three
power settings.
xOnce the room reaches the required
temperature,heating element will stop
working but fan also working .Once the
temperature decreased, The heating
element will be working. The fan
heater now starts and stops automatically
and thus keeps the room temperature
constant.
1/3(25W) 2/3(1000W) 1/1(2000W) off
1/3(30W) 2/3(1650W) 1/1(3300W) off