Luraco PRO-40K User manual

1

2
Congratulations on your purchase of the new Luraco Pro-40K Drill
We are pleased that you have chosen Luraco Health & Beauty, LLC for your
professional drill purchase. We hope you will enjoy the quality, convenience, and
excellent performance of your new Pro-40K. We know from experience that you will
soon be telling your friends and colleagues about the quality and performance of the
Luraco Pro-40K drill, and how enjoyable it is to operate.
Customer Assistance
For assistance with this product, please visit
www.luraco.com
Or call Luraco Health & Beauty, LLC Customer Care toll-free at
1-800-483-9930
To save time, please note your serial number and date of purchase before calling.
© 2018 All Right Reserved. Luraco Health & Beauty, LLC. Jan 2018.
www.luraco.com

3
ATTENTION!
This product contains a rechargeable Lithium-ion battery pack. Lithium-ion batteries
have a much longer life and a higher capacity compared to regular NiCad batteries.
However, care must be taken when storing and using Lithium-ion batteries and all
products containing Lithium-ion batteries. For prolonged storage periods, a
temperature of around 25°C or below 80°F is recommended. In addition, the batteries
should be stored at a charged level of around 60% of capacity. Always keep battery
and drill controller away from wet and/or heated surfaces.
Over-discharging Lithium-ion batteries will result in permanent battery damage.
If you need to stock Pro-40K units for a prolonged period of time, we
recommend that the Pro-40K controller be charged at least once every 6
months to prevent permanent damage to the Lithium-ion battery pack.

4
TABLE OF CONTENTS Page
I. Introduction ........................................................................................................................... 5
II. Important Safety Instructions .............................................................................................. 5
III. Operations ........................................................................................................................... 6
3.1. Understanding the Drill Controller................................................................................. 6
3.2. Product Dimensions and Weight ................................................................................... 7
3.3. Understanding the Drill (Hand-piece) ............................................................................ 7
3.4. Changing the Drill Bit ..................................................................................................... 8
3.5. Battery Management System ........................................................................................ 8
3.6. Troubleshooting Guide .................................................................................................. 9
3.7. Product Maintenance .................................................................................................... 9
IV. Warranty Information ....................................................................................................... 10
V. Important Return Instructions ........................................................................................... 10
VI. Disclaimers......................................................................................................................... 11

5
I. INTRODUCTION
Professional Pro-40K Drill for Nail Salons and Dental Offices by Luraco
Health & Beauty, LLC.
INNOVATION + QUALITY + VALUE
Luraco Health & Beauty, LLC, one of the leading electronics equipment
manufacturers, has successfully developed a new model of professional drill
(Pro-40K) to bring all aspects of novel technologies, performance, and reliability
into one ingenious and comprehensive piece of equipment; truly the best drill
for professionals on the market today.
Outstanding Features:
•True Brushless motor for long lasting performance
•High torque and smooth operation up to 40,000 RPM (+/-10%)
•Long life and rechargeable Lithium-ion battery
•Low vibration and low noise
•Light weight and portable
•Up to 10 hours of battery life
•Innovative design for manicure, pedicure, and dental
professional use
•Uses a standard bit Φ2.35 mm
•Colet chuck type
•Aluminum and Stainless-Steel handpiece
•Seamless transition between wall and battery power
•Forward and reverse controls with variable speeds
•Smart overload protection
•Universal power supply (120V/220V)
•Designed and Made in the U.S.A. from U.S. and global
components
II. IMPORTANT SAFETY INSTRUCTIONS
When using electrical equipment, basic safety precautions should always
be followed to reduce the risk of fire, electrical shock or injury.
1. Read and follow all instructions before using the equipment. This equipment
should not be used by children.
2. Use only the Pro-40K handpiece!
3. Do not disassemble or modify the unit without authorization from
Luraco Health & Beauty, LLC. Warranty will be voided if changes are
made without authorization.
4. Keep power cord and controller away from wet or hot surfaces.
5. Lock the chuck before using the hand-piece to avoid product malfunction.
6. Do not touch the hand-piece connector with wet hands.
7. Make sure the hand-piece has completely stopped before putting it down.
8. Always turn off and unplug power to the equipment before servicing.
Cleaning and maintenance should not be done by children.

6
9. Do not insert any object into any openings and avoid dropping the
equipment. In the event of the hand-piece being dropped, check to make sure
the bit is not bent and the unit does not overheat.
10. Never operate this equipment with a damaged cord or plug. If it is not
working properly, if it is dropped or damaged, or dropped into water, return
the equipment to a service center for examination and repair.
11. Wear proper protective clothes and equipment, including a dust mask and
safety goggles. Keep the workplace clean.
After reading this user’s guide, if you have any questions or comments, please call
1-800-483-9930 or contact our technical support department at
[email protected] or visit our website at www.luraco.com for more information.
III. OPERATIONS
3.1. Understanding the drill controller
The Side and Front View of Drill Controller

7
3.2. Product Dimensions and Weight
Controller: 12.8 cm * 7.7 cm * 2.7 cm
Hand Piece: 14 cm
Drill Bit: Φ2.35 mm
1
Power Connector
When the power cord is plugged in, the unit will charge
automatically. Use only with Luraco 11.5V Charger.
2
Drill Controller
The drill controller is the heart of the system and
houses the control electronics and the battery.
3
Charge LED
Indicator
Blue light indicates the drill controller is being charged.
Off - The unit is not receiving external power.
4
Power Switch &
Speed Control
Turn the knob clockwise to turn on the unit and
increase the speed. Turn the knob counter-clockwise
to decrease speed.
Turn the knob counter-clockwise to the end to turn off
the unit.
5
Battery LED
Indicator
Green –Battery is good.
Flashing Green –Automatic shut down in 15 minutes.
Flashing red and green –Drill Control shuts down due
to drill overload current.
Flashing red –Battery is almost depleted.
Solid red –Battery is severely depleted and must be
recharged.
6
Drill Direction
Switch
Up (Forward) the spindle will rotate in the forward
direction.
Down (Reverse) the spindle will rotate in the reverse
direction.
7
Drill/Motor
Connector
Where the drill connects/disconnects.
Use only with the Luraco Pro-40K handpiece
8
Drill holder
Fully insert the drill here when it’s not in operation
9
Carrying Clip
Use this clip to carry the Pro-40K system on user’s
body

8
3.3. Understanding the Drill (Hand-Piece)
Parts Description
3.4. Changing the drill bit
A) Open the hand-piece chuck by turning the handle counterclockwise
B) Change the drill bit
C) Lock the hand-piece chuck by turning the handle clockwise
- To avoid product malfunction, always lock the hand-piece chuck
before using.
- Always check the bit for any damages.

9
3.5 Battery Management System
Luraco Pro-40Khas an onboard battery monitoring system that will monitor the Lithium-
ion battery while the drill is in operation. In the event that the battery is completely
depleted, simply plug the power cord into the power connector on the control unit and
continue your work. It charges automatically while in use.
3.6 Troubleshooting Guide
Issues
Troubleshooting
Diagnosis/Solution
Drill does not work
Connect to the charger
Working now: Battery was low
Not working: Check the
controller or handpiece
No charging blue
light when
connected to the
charger
Verify that the charger
is plugged in properly
Make sure to use only the
Luraco 11.5V charger
Battery low
warning comes
on too often
Let the unit charge
overnight
The battery is approaching its
end of life. Call Luraco Customer
Service to purchase a
replacement battery
Battery Indicator Status
Green Light
The battery is in the optimal range
Flashing Green
Flashing Green –Automatic shut down in
15 minutes.
Flashing Red
The battery is running low and will only
provide about 1 more hour of use
Solid Red Light
The battery is critically low and should be
recharged immediately
Flashing Red and Green
Light
Drill Control shuts down due to drill
overload current

10
3.7 Product Maintenance
•Keep the area around the hand-piece clean from dust and grindings.
•Remove dust on hand-piece, wiping with isopropyl alcohol and avoid all
liquids from penetrating into internal parts.
•Do not clean with water.
•Do not apply oil to the product. The grease inside the bearing could melt
due to oil.
•Air cleaning is acceptable but do not use high air pressure.
IV. WARRANTY INFORMATION
Luraco Health & Beauty, LLC is dedicated to offering our valued customers the
best buying experience available. As part of this commitment, the company works
very hard to provide customers with the best warranty plan available. We
guarantee that defective LURACO Pro-40K units, due to manufacturing faults, will
be repaired or replaced during the effective warranty period.
ONE (1) YEAR LIMITED WARRANTY
1. This Warranty applies only to the original purchaser of this product for one (1)
year from date of purchase.
2. This Warranty applies only to the repair or replacement of any supplied or
manufactured parts of this product. The warranty does not cover dropped or
abused units, wrong installations, inappropriate maintenance or repairs, and
normal wear and tear of bearings, spindle, gear, and rotator.
3. Unless stipulated by law, Luraco Health & Beauty, LLC shall not be liable for
any personal injury, property damages or any incidental or consequential
damages of any kind resulting from malfunctions, defects, misuse, improper
installation or alteration of this product.
The following conditions may void the warranty
- Dropping or excessive shock to the hand-piece or control box
- Submerging the hand-piece or control box in any liquids
- Inserting bent or damaged bits into the hand-piece
- Servicing or disassembling hand-piece or control box by any person other than
authorized factory technicians.

11
V. IMPORTANT RETURN INSTRUCTION
If the need arises for return or repair, the following steps must be followed:
1. Contact Luraco Customer Service/Tech Support at 800-483-9930 to get a
case number.
2. Carefully pack the item in its original carton or other suitable container to
avoid damage during shipping.
3. Before packing your unit, make sure to include the following information with
your return:
a. Your name with full shipping address and telephone number
b. A dated receipt for PROOF OF PURCHASE
c. The case number that will be given in Step 1
Attach documentation detailing the problem you are having with your device. All
shipping costs must be prepaid by the sender.
VI. DISCLAIMERS
Limited warranty and liability: Information in this document is believed to be
accurate and reliable. However, Luraco Health & Beauty, LLC does not give
any representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information.
In no event shall Luraco Health & Beauty, LLC be liable for any indirect,
incidental, punitive, special or consequential damages (including - without
limitation - lost profits, lost savings, business interruption, costs related to the
removal or replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of contract
or any other legal theory.
Right to make changes: Luraco Health & Beauty, LLC reserves the right to
make changes to this product or information published in this document,
including without limitation specifications and product descriptions, at any time
and without notice. This document supersedes and replaces all information
supplied prior to the publication hereof.
© 2018 All Right Reserved. Luraco Health & Beauty, LLC. Jan 2018.
www.luraco.com

12