Luxeport BaseStation User manual

BaseStation Manual
iportproducts.com/luxeport-support

2 3
GET TO KNOW
LUXEPORT
BASESTATION
3
2
1
4
1) Security Lock
2) Articulating Hinge
3) Charge Pins
4) Removable Security Foot
7) USB Power Supply
6) USB A - USB C Cable
8) Lock Tool & 4 Screws
BASESTATION
SET UP
Step 1
Step 2
Power adapter can be ran
out the back of the Base or
down through the table for
a clean hidden cable look
using a 5/8” drill bit and the
provided drill template.
Insert USB cable into
bottom of BaseStation
and power supply.
Plug power supply
into wall.
5) Drill Template

4 5
NANOPAD CARE
Step 3
Step 4
Clean table with provided
alcohol pad and ensure
surface is dry before
placing BaseStation.
If NanoPad loses its
suction, clean NanoPad
with a damp cloth.
Remove plastic covering
on the NanoPad before
placing on the table.
ATTACH CASE
TO BASESTATION
Step 5
Ensure the Case is
properly seated for secure
mounting and charging.
Charging begins immediately.
Attach Case in portrait or
landscape orientation.
To remove, pull from
either left or right side.

6 7
BASESTATION SECURITY
MOUNTING OPTIONS
REMOVING
SECURITY FOOT
Use the provided lock
tool to turn both security
screws CLOCKWISE until
full stop.
Use a flathead screw
driver to remove the
security foot using one of
the holes near the back
of the BaseStation and
pry outward.
The LuxePort Case can be securely fastened to the
BaseStation for permanent installation. The ability to
articulate the viewing angle is maintained, even while
secured. The BaseStation can be securely mounted to
a desk, wall or VESA via MIS-D, 75 standards.
Step 2
Step 1

8 9
SCREW SECURITY
FOOT TO TABLE
Use alignment target to
help center the
BaseStation. Use provided
screws to secure Security
Foot to table.
If routing cable into table:
Insert drill template onto
BaseStation foot. Then
mark and drill 5/8”
cable hole.
Attach the FRONT of the
BaseStation first, then set
flat on the foot.
SECURE BASESTATION
TO SECURITY FOOT
Use the provided tool to
turn both security screws
COUNTERCLOCKWISE
until full stop.
Place the Case back on
the BaseStation in the
desired orientation.
Front
Back

10 11
LOCK THE LUXEPORT CASE
TO THE BASESTATION
Use the provided lock tool
to turn security screw
COUNTERCLOCKWISE
until stop.
USB MODULE (OPTIONAL)
The USB Module can be
purchased to charge two
additional mobile devices.
The USB Module attaches to
the back of the BaseStation
and ships with its own power
supply to power the LuxePort
Case and two
additional devices.
The BaseStation with USB
Module is great for bedside
and kitchen counter
applications.
Learn more at
iportproducts.com/luxeport
The Case will remain
locked to the BaseStation.
or

For more help and info
please visit:
iportproducts.com/luxeport
iPort
991 Calle Amanacer
San Clemente, CA 92673
United States of America
[phone]
CAUTION: Use products as directed.
Unspecified use could result in injury.
CAUTION: This product contains
magnets. Do not place in direct
proximity with magnetically sensitive
objects such as credit cards or
exposed hard drives. Persons with
pace makers are not recommended
to use this product.
Warranty can be found at
iportproducts.com/warranty
33-7876